Panasonic AU-VCVF1G

Electronic HD Colour Viewfinder for Varicam

Suggested List Price: £POA+VAT

Product Code: PAN-AUVCVF1G

Where to buy

Qty:

Other Viewfinders

Panasonic AG-CVF15

Panasonic AG-CVF15

Colour ViewFinder
Panasonic AU-VCVF10

Panasonic AU-VCVF10

OLED Viewfinder for Varicam LT
SmallHD SideFinder

SmallHD SideFinder

Fully featured HD viewfinder with a flip-out 1080p display
Blackmagic Design URSA Studio Viewfinder

Blackmagic Design URSA Studio Viewfinder

Professional 7" Studio Viewfinder for URSA Mini
Blackmagic Design URSA Viewfinder

Blackmagic Design URSA Viewfinder

High Resolution Viewfinder for URSA range
  • Electronic HD Colour Viewfinder for Varicam Varicam HS / Varicam 35
  • Display Panel: OLED, 0.7-type, 2.76 million dots
  • Signal Input: 1080/59.94p, 1080/50p, 1080/60p

Panasonic

  • VariCam 35
  • VariCam HS

Version 7.50-00-0.00

  • CAMERA(35):7.50-00-0.00
  • CAMERA(HS):7.50-00-0.00
  • RECORDER :7.50-00-0.00

AU-VCVF1G Ver 1.10

  1. The lower limit of FPS setting range is extended.
    When HIGH SPEED is ON, FPS can be set from 1.
    FPS Setting Range: So far 120-240p / 100-200p / 60-120p / 50-100p
    → Changed to 1 - 240p / 1 - 200p / 1- 120p / 1 - 100p
  2. REC CHECK function is added.
    Playback function of the first or last 5-second footage of the last clip recorded after the power is turned on This is used after it is assigned to a User SW.
    The following items are added for assignment to USER1 – 4 in MENU.
    - CHECK LAST CLIP START ・Playback of the first 5-sec
    - CHECK LAST CLIP END  ・Playback of the last 5-sec
  3. DESQUEEZE in playback is supported.
    Firmware is changed so that not only EE output but also a played clip is shown using DESQUEEZE when MENU -> ANAMORPHIC DESQUEEZE -> DESQUEEZE is ON.
    Varicam HS does not support ANAMORPHIC DESQUEEZE even in EE mode.
    VariCam 35 does not support DESQUEEZE in SUB-playback.
  4. CPS function is disabled.
    The CPS MENUs are disabled so that the setting, change, etc. of passwords are not allowed.
    However, if a CPS-encrypted medium is inserted into the camera, these MENUs are shown.
  5. Default setting for monitor output indication of USER CLIP NAME is changed to OFF.
    OUTPUT SETTINGS Menu
    MON OUT INDICATOR ->USER CLIP NAME(TYPE3) ->USER CLIP NAME :OFF
  6. Support for Add/Delete function of SHUTTER and WB via ROP App
    Supported App: VARICAM ROP Ver. 1.0.3 or later
  7. Support for connection for network via the access point (Infra mode).
  8. Supported wireless LAN modules are added.
    AJ-WM50MC (China) Automatic Channel Switching
    GW-900D (PLANEX, Japan)
  9. Improvement
    The indicator for remaining card capacity is corrected because it has a problem when the format is Long GOP on 23.98p of Frequency.
  10.  

Ver 7.00-00-0.0x

  • CAMERA(35):7.00-00-0.00
  • CAMERA(HS):7.00-00-0.00
  • RECORDER :7.00-00-0.01

AU-VCVF1G Ver 1.10

  1. [35 | HS] There is an error in Capture Frame Rate, which is metadata of a clip recorded in VFR mode. This is corrected.

    Occurs with Ver. 7.00-00-0.00 (released in February 2017) and later

    Symptom

    When the system frequency is 23.98p/29.97p/59.94p, the value of Capture Frame Rate (metadata of a VFR-recorded clip) is rounded down and shown as an integer.

    Example 23.98p for SYSTEM & 48fps for VFR
    False: 47 True: 47.95

    Therefore, the motion speed in VFR was not correctly calculated by application software that refers to the metadata.

  2. [35 | HS] Some operations cause E-36 or E-37 system error. This problem is fixed.

[ 35:AU-V35C1, HS:AU-V23HS1 ]


Ver 7.00-00-0.0x

  • CAMERA(35):7.00-00-0.00
  • CAMERA(HS):7.00-00-0.00
  • RECORDER :7.00-00-0.00

AU-VCVF1G Ver 1.10

  1. [35 | HS] The following ProRes formats are added.
    • ProRes 4444 XQ
    • ProRes 4444 (12bit)
      *ProRes4444 (10bit) replaced with (12bit)
    • ProRes 422
    • ProRes 422LT
  2. [35 | HS] VFR ON/OFF function can be assigned to the USER button.
  3. [35 | HS] Support for newly released ROP APP for iOS
    VariCam ROP is application software that can be downloaded free of charge from Apple APP store.
    For details, click here to see the product information website.
  4. [35 | HS] The FOCUS DISP menu is also available while the Main Color Setting is Vlog.
  5. [35 | ] The delay of output signals from VariCam35 MON OUT is improved.
    However, there are the limitations as follows when MAIN CODEC is 4K-LT and HighSpeed is ON:
    - 4K output is limited to 2 Sample Interleave.
    - DAILIES PREVIEW is not output from MON OUT.
  6. [35 | ] The SORROUND VIEW menu is also available while the IMAGE INVERT Setting is VF SDI ON.
  7. [35 | ] The “SUB REC & MON OUT” item of ANAMORPHIC DESQUEEZE menu is also available while PIXEL Setting is HD or 2K.
  8. [35 | HS] VF EE output during the playback is made possible.A menu item is added.
  9. [35 | HS] The item "2.00:1" is added to Frame Marker Aspect settings.
    Relatived menus are; [OUTPUT SETTINGS] -> [VF SDI MARKER], etc.
  10. [35 | HS] The item "VF" of "MON OUT2 SIGNAL SEL" menu is changed to "VF SDI".
  11. [ AU-VCVF1 ] Stability of the Auto OFF function is improved.

[ 35:AU-V35C1, HS:AU-V23HS1 ]

Download the latest Firmware and Software