The PTC-300NDI is an NDI 4K50/60p PTZ camera. PTC-300NDI can be easily controlled via traditional RS-422 serial port, or IP remote control via DVIP (Datavideo proprietary protocol), Sony VISCA over IP or any NDI controller.
The PTC-300NDI supports dual streaming output for A/V market application, you can easily stream to Facebook (RTMPS), YouTube and dvCloud.
With built-in 1/1.8" CMOS sensor, supports resolution up to 2160p 50/60.
The PTC-300NDI camera has 20x Optical Zoom and 16x Digital Zoom with the f1.58 wide open aperture.
Advanced 2D/3D noise reduction technology is also used to further reduce the noise while ensuring image sharpness.
Supports simultaneous HDMI 2.0 and IP output up to 2160p 50/60 and also 3G-SDI output up to 1080p60/50.
The camera control app is tailored for the Datavideo PTZ camera series. It can monitor the live streaming video from PTC-140, PTC-280, PTC-280NDI and PTC-300 series. The app can control up to 4 cameras simultaneously via DVIP, you can intuitively set up and recall the presets, and adjust white balance, focus and IRIS. The app is able to decode the live streaming via RTSP, SRT, and NDI (only RTSP is available now), Easily monitor the live streaming video and set up the parameters promptly in one application. Datavideo provides iOS and Android versions, which you can download on Google Play and App Store for free!
Support RTSP and RTMPS protocols, easy to stream directly to two different CDN platforms and Datavideo dvCloud as well.
Control real-time pan, tilt, and zoom camera movements with Datavideo PTZ View Assist APP, RMC-300A and RMC-180 series. With configurable preset positions supported.
RS-422 and ethernet to use DVIP or VISCA over IP commands to integrate with larger control systems.
Green and red lights tally to show the preview and program status for broadcast applications.
The PTC-300NDI supports PoE for easy installation. No need to find local power outlets or hire an electrician to install outlets wherever you want to mount your camera. Simply run a single CAT 6 cable to power your PTC-300NDI.
Support compression of resolution up to 3840x2160 with frame up to 59.94, 60fps and the second channel 1280x720p with 30fps compression. AAC, MP3 and PCM audio compression also supported.
There is no need for multiple cables and complicated setup. Single-wire concept helps you to transfer video, audio, power, tally, and control over only one Ethernet cable.
Power Over Ethernet (PoE) functionality allows you transmit all the information and power over only one cable.
NDI® is a registered trademark of Newtek, Inc.
Present PTC-300NDI as the video input source to video streaming applications Skype, GoToMeeting, WebEx, Zoom, and more.
Here's an overview of our vendors exhibiting at ISE 2020. Please call us on +44 (0)1457 851000 if you would like to book a stand tour with one of our manufacturers. BLACKMAGIC DESIGN HALL 3, STAND C140 The Video Assist 12G 5” and 7” monitor recorders are now shipping. The original HD versions were incredibly popular with AV technicians who wanted to verify SDI and HDMI feeds and check waveform levels. For production teams, their 4K HDR capture makes them a superb on-camera SD card recorder. The ATEM Mini is a very small, cost-effective 4 channel HDMI video switcher with streaming output. Great as a portable mixer or a signal switcher, it’s being adopted by everyone from conference producers to AV technicians looking for simple HDMI switching.
Datavideo's DAC-75T is designed to convert video signals from VGA, HDMI, SDI to HDMI or SDI. With touchscreen control, it's a great ally for venues, conference teams and AV rental teams that need to be ready for whatever the presenter needs to project. DAC-75T makes childplay of connecting your source to a screen or projector. The DAC-75T does upscaling, downscaling and standards conversion for any HDMI, VGA or SDI device to any HDMI or SDI screen or projector. RCA inputs allow audio to be embedded to the output of the video signal for recording purposes.