Product Code: BMDHYPDRSTEXRMK
Suggested Retail Price £179+VAT
Where to buyHave a question about this product or want to request a demo?
Contact Our Technical TeamWarranty information available from Blackmagic Design's website
Here's an overview of our vendors exhibiting at ISE 2020. Please call us on +44 (0)1457 851000 if you would like to book a stand tour with one of our manufacturers. BLACKMAGIC DESIGN HALL 3, STAND C140 The Video Assist 12G 5” and 7” monitor recorders are now shipping. The original HD versions were incredibly popular with AV technicians who wanted to verify SDI and HDMI feeds and check waveform levels. For production teams, their 4K HDR capture makes them a superb on-camera SD card recorder. The ATEM Mini is a very small, cost-effective 4 channel HDMI video switcher with streaming output. Great as a portable mixer or a signal switcher, it’s being adopted by everyone from conference producers to AV technicians looking for simple HDMI switching.
VT or video tape is pretty much dead now. We’ve moved into digital workflows that no longer rely on tape but everyone still recognises and calls out “Roll VT”. This harks back to a time when very little in the studio gallery was integrated or automated. There was a VT operator responsible for looking after all the A and B rolls of pre-recorded video tape. The operator loaded the rolls of tape and lined them up to a point where the tape was ready to playout the required video from the deck.
Not just some new products and technical updates from Blackmagic Design. No, these are major new products and massive technical updates.
This is a major update for HyperDeck Extreme models and includes the new features as described below:
You can now use the internal M.2 SSD as network storage. There is a new setting in the menu to enable the internal M.2 flash memory card to be used and then you can select it to be used as either a record cache or as network storage. When it's used as network storage, it can be accessed by all computers on your network via the rear 10G Ethernet port.
Both HyperDeck Extreme models allow you to install an M.2 flash memory card by unscrewing a metal plate on the underside of the HyperDeck Extreme unit.
Check the manual for recommended models of M.2 card or your reseller can install an M.2 flash memory card for you. This update also has other small improvements and bug fixes.
You can now record 4 separate inputs on the HyperDeck Extreme 8K HDR model. There is a new input menu setting in the record menu that lets you select "4 x SDI" to select the 4 channel recording mode. The LCD will show a multi-view with the 4 inputs live.
This means you can use each of the 4 x 12G-SDI inputs for recording 4 separate video inputs at the same time, as long as they are the same video standard. The HyperDeck will automatically re-sync in the inputs if they are out of time. Each input can record all HD and Ultra HD video standards up to 2160p60.
Each record channel will store the media files into a separate record folder to make managing media files easer. You can also swipe to set the metadata for each channel separately, such as the camera number. That's important when doing replay. There are no new features in 8.5 for other HyperDeck models.
The following models have new features.
NOTE: Please check english section for new features and we will have the manual translated very soon!
No new features in 8.4.1 for other HyperDeck models.
Before installing the software, we recommend that you run "Uninstall HyperDeck" first.
If you have installed the drivers prior to installing any of these applications, we recommend that you uninstall and reinstall the drivers. This will ensure that all relevant components are installed in their required locations.
Some applications may use third party code under license. For details please refer to the included "Third Party Licenses.rtf" document.
No new features in 8.3.2 for other HyperDeck models.
The following models have new features.
HyperDeck Extreme 4K HDR
HyperDeck Extreme 8K HDR
HyperDeck Shuttle HD
HyperDeck Shuttle HD
No new features in 8.3.1 for other HyperDeck models.
The following models have new features.
HyperDeck Shuttle HD
No new features in 8.3 for other HyperDeck models.
This update adds the following features for the HyperDeck Extreme 4K HDR and the HyperDeck Extreme 8K HDR models.
No new features in 8.2 for other HyperDeck models.
The following models have new features
No new features in 8.1 for other HyperDeck models.
No new features in 8.0.4 for other HyperDeck models.
No new features in 8.0.3 for other HyperDeck models.
Download the latest Firmware and Software