Teradek Bolt 4K LT 750 Receiver Gold Mount | 3G-SDI/HDMI Wireless Video Receiver - 750ft Gold Mount

Teradek’s most powerful compact system yet. Featherlight body weight with heavyweight strength, so you can fly at the speed of cinema. Entirely HDR. Zero delay.

Increased Agility

Small form factor and lighter weight enable greater freedom of movement

Added Value

Improved feature set from previous Bolt generations at the same introductory price

Zero-Delay 4K Wireless Video

Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no image delay (>0.001sec).

Transmitter:

Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)
Output: 1x 3G-SDI (up to 1080p60)

Receiver:

Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)

True HDR

Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.

Improved Wireless Performance

Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.

Send Signal up to 6 Receivers

Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.

Lightweight Body with Versatile Mounting

TX Mounting: M3 / ¼”-20
RX Mounting: M3 / ¼”-20 / ⅜”x16

Universal Cross-Compatibility between all Bolt 4K Devices

Send and receive signals between any Bolt 4K series of devices for expanding workflow requirements.

Camera Metadata

Transmit metadata, timecode, and start/stop flags from most camera manufacturers.

Bolt App for Android and Apple iOS

Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.

Teradek Bolt 4K Firmware Version 4.2.1

New Features

• Added Support for Bolt 4K LT

Changes and Improvements

• Reduced time-to-video after power on and video disconnect/reconnect
• Improved pairing reliability and speed, wireless and wired/Bluetooth
• Improved status message updates
• Removed radio reset after changing fixed frequency from front panel
• Improved 20MHz mode stability
• Added F next to frequency when in fixed frequency mode

Bug Fixes

• Fixed issue where some TX units could transmit a blank green screen when powered on
• Fixed unnecessary restarts, resets, reduce frequency of 'Please Wait' and 'Applying Settings' messages
• Artifacts were visible when transmitting 1080i50 video
• Video could stop transmitting after some time using 1080i59 resolution
• Disabling fixed Frequency mode set Frequency to 5375MHz
• Front panel could show transmitting video when no video is connected
• Video quality mode could be set to auto when changing other wireless settings

Download the latest Firmware and Software

• Download HiRes Images

• 1x Bolt 4K LT RX 750 Gold Mount
• 2x Bolt 4K RX Battery Cover
• 1x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in
• 1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in
• 1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in
• 1x 3G-SDI (BNC to BNC) Cable - 10in
• 1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft
• 5x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)