Teradek Bolt 3000 Deluxe Kit SDI | HDMI 2 x RX V Mount Wireless Video Transceiver Set

Deluxe SDI | HDMI Wireless Video Tranceiver Set - 2 x RX V Mount 3000ft

Suggested List Price: £13,150+VAT

Product Code: TER-BOLT-995-2V

Where to buy

Stock status: In Stock; available from resellers

Qty:

Also consider

Anton Bauer V190

Anton Bauer V190

Digital 190 V-Mount Battery
SmallHD 702 Bright and LP-E6 Battery Kit

SmallHD 702 Bright and LP-E6 Battery Kit

702 Bright Full HD Field Monitor and LP-E6 Battery Kit
SmallHD 1703 HDR

SmallHD 1703 HDR

17" HDR Ready 1000NIT 1080p Ultra Durable Monitor
LEDGO LG-T1440MC

LEDGO LG-T1440MC

Bi-colour Ultra Soft LED Studio Light

Optional Extras

Teradek Sidekick II

Lightweight HD-SDI Receiver

Product Code: TER-BOLT-954

Suggested List Price: £1,920+VAT

Teradek BIT-780-1

Yellow Identification Plate for Bolt 1000/3000 Receiver

Product Code: TER-BIT780-1

Suggested List Price: £9+VAT

Teradek BIT-781-1

Red Identification Plate for Bolt 1000/3000 Receiver

Product Code: TER-BIT781-1

Suggested List Price: £9+VAT

Teradek BIT-782-1

Green Identification Plate for Bolt 1000/3000 Receiver

Product Code: TER-BIT782-1

Suggested List Price: £9+VAT

Teradek BIT-783-1

Blue Identification Plate for Bolt 1000/3000 Receiver

Product Code: TER-BIT783-1

Suggested List Price: £9+VAT

Teradek BIT-780

Yellow Identification Plate for Bolt 1000/3000 Transmitter

Product Code: TER-BIT780

Suggested List Price: £9+VAT

Teradek BIT-781

Red Identification Plate for Bolt 1000/3000 Transmitter

Product Code: TER-BIT781

Suggested List Price: £9+VAT

Teradek BIT-782

Green Identification Plate for Bolt 1000/3000 Transmitter

Product Code: TER-BIT782

Suggested List Price: £9+VAT

Teradek BIT-783

Blue Identification Plate for Bolt 1000/3000 Transmitter

Product Code: TER-BIT783

Suggested List Price: £9+VAT

  • Deluxe SDI | HDMI Wireless Video Tranceiver Set - 2 x RX V Mount 3000ft
  • Longer Range
    Transmit visually lossless video up to 3000ft with no delay
  • 20mhz Channels
    Use more than twice as many Bolts in one location or avoid interference like never before
  • 2 New DFS Channels
    Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range
  • Built-in HDMI To SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
  • Individual Identity
    Easily identify which Bolt TX and RX work together with removable colored top plates
  • Support for Spectrum Analyzer
    You can now view which channels are not ideal for Bolt whenever you arrive on set. No more guessing, no more mystery interference.
  • Added Broadcast mode
    allows for longer range when used with directional antennas
  • Added three 'Quality' options to balance operation between maximum range and maximum overall quality
  • Supports Wired Pairing
  • Metadata and timecode support
  • 3D LUTs
  • Dual inputs/outputs
  • Multicast capable
  • Manual frequency selection
  • USB 3.0 GRAB Engine included

Technology Guides

Teradek Bolt Firmware v2.1.0

New Features

Bolt 500/1000/3000

  • Added support for Spectrum Analyzer
  • Added support for wired pairing
  • Added support for China region

Bolt 3000 Only

  • Added Broadcast mode, allows for longer range when used with directional antennas
  • Added three 'Quality' options to balance operation between maximum range and maximum overall quality

Changes and Improvements

  • Improve SDI audio compatibility

Bug Fixes

  • 2nd generation Bolt receivers would enter 'Wireless Off' state after some time without an active link

Teradek Bolt Firmware v2.0.5

New Features

  • None

Changes and Improvements

  • Update to support minor hardware change, does not affect existing devices

Bug Fixes

  • None

Bolt Firmware v2.0.6

New Features

  • Added 3G-SDI Level B DL (1080p50/59/60 over 3G-SDI) support for 3rd Generation Bolt line. 3G-SDI Level A will be present on the loop out.
  • Added support for Canon HDMI record flag and time code output over HDMI and SDI.

Changes and Improvements

  • Improved SDI audio support with Black Magic ATEM products for 3rd generation Bolt products.
  • Support for minor hardware change on 3rd generation Bolt. Does not affect existing devices. To update 500/1000/3000, click Advanced, then check the box in the Upgrade column for the Controller

Bug Fixes

  • Status LED did not work correctly for Bolt 1000/3000

Download the latest Firmware and Software

  • 1 x Bolt Pro 3000 TX SDI/HDMI
  • 2 x Bolt Pro 3000 RX SDI/HDMI
  • 1 x Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
  • 1 x Bolt RX Single V Mount Battery Plate 14.4V
  • 1 x SKB Waterproof Utility Case (22 x 17 x 8 inches)
  • 5 x N-Male to RP-SMA 12 inch cables (for use with Bolt Rx Only)
  • 1 x 1/4 20" Thumb Screw (1.25 inch)
  • 1 x 1/4 20" Thumb Screw Plastic Head 2 inch length
  • 1 x 1/4 20 Thumb Screw Plastic Head 3/8 inch length
  • 1 x 1/4-20 Screw Phil Pan Mach Black 3/8 inch
  • 1 x 1/2 20" Lightstand Adapter
  • 1 x 3/8" Lightstand Adapter
  • 1 x 2pin Lemo to PowerTap - 18 inch Cable
  • 1 x 2pin Lemo to PowerTap - 11 inch Cable
  • 1 x PSU 2-Pin Lemo 18W
  • 1 x USB 3.0 SuperSpeed Cable (A to Micro, 3ft)
  • 1 x Hot Shoe Adapter
  • 2-3 x (2 for 1 Rx, 3 for 2 Rx) SDI Cables (BNC to BNC)
  • 2-3 x (2 for 1 Rx, 3 for 2 Rx) HDMI Cables (Type A to Type A)
  • 5 x Antenna 2dBi WiFi 5.8GHz
  • 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
  • 1-Year Warranty on Bolt Pro 2000 Units