Converters and Scalers

Blackmagic Design Teranex Mini - IP Video 12G | Convert video to IP and route it over your existing ethernet network

Blackmagic Design
Rackbuilder
Rackbuilder

Teranex Mini - IP Video 12G

Convert video to IP and route it over your existing ethernet network

Product Code: BMD-CONVNTRM/OB/IPV

Suggested Retail Price £389+VAT

Where to buy

Kit List

View your Kit List
  • Convert video to IP and route it over your existing ethernet network, or you can convert IP video back to SDI
  • Uses standard Blackmagic Videohub software and hardware control panels to configure and switch IP video over ethernet as easily as SDI signals
  • 12G-SDI and the low latency broadcast quality TICO codec so you can route HD over the built in gigabit ethernet connection or Ultra HD over 10G ethernet with an optional 10G SFP

Specifications

  • SDI Video Inputs / Outputs: 1 x 10-bit HD-SDI, 6G-SDI and 12G-SDI
  • Gigabit ethernet supports 3G-SDI up to 1080p60 using TICO encoding/decoding. Optional 10G optical data ethernet supporting Ultra HD up to 2160p60 using TICO encoding/decoding
  • Auto detection of HD-SDI, 6G-SDI or 12G-SDI.
  • Updates: USB 2.0 high speed (480Mb/s) interface or via Ethernet
  • Configuration: Ethernet or USB 2.0 for firmware updates and IP address setting
  • Reclocking: On all SDI outputs, auto switching between high definition, 6G-SDI or 12G-SDI video

Warranty

Warranty information available from Blackmagic Design's website

Blackmagic Design Teranex Mini - Rack Shelf
Teranex Mini - Rack Shelf

Teranex Mini Rackmount shelf
[BMD-CONVNTRM/YA/RSH]

Bridging the NDI gap to ATEM: Blackmagic in the IP World

The video production market is transitioning towards IP. Whether it will ever get there 100% or will find a balance between HDMI, SDI and Ethernet remains to be seen, but we are without doubt entering a phase where crews and installers are weighing up the benefits of IP technology for each project. Why IP?

New launches at ISE 2020

Here's an overview of our vendors exhibiting at ISE 2020. Please call us on +44 (0)1457 851000 if you would like to book a stand tour with one of our manufacturers. BLACKMAGIC DESIGN HALL 3, STAND C140 The Video Assist 12G 5” and 7” monitor recorders are now shipping. The original HD versions were incredibly popular with AV technicians who wanted to verify SDI and HDMI feeds and check waveform levels. For production teams, their 4K HDR capture makes them a superb on-camera SD card recorder. The ATEM Mini is a very small, cost-effective 4 channel HDMI video switcher with streaming output. Great as a portable mixer or a signal switcher, it’s being adopted by everyone from conference producers to AV technicians looking for simple HDMI switching.

Major announcements from Blackmagic Design

Not just some new products and technical updates from Blackmagic Design. No, these are major new products and massive technical updates.

What's new in Teranex Utility 7.1.1

  • Windows 10 driver signing support for Teranex Mini IP Video 12G

Minimum system requirements for macOS

  • macOS Catalina 10.15
  • macOS Big Sur 11.0
  • A suitable USB 2 port for software updates
  • A suitable ethernet connection

Minimum System Requirements for Windows

  • Microsoft Windows 10
  • Any Windows PC with an ethernet port and free USB 2 port

Installing Teranex Utility

Before installing the software, we recommend that you run "Uninstall Teranex" first.

The Blackmagic Teranex installer package installs:

  • Blackmagic Teranex Setup application

Additional Information

Some applications may use third party code under license. For details please refer to the included "Third Party Licenses.rtf" document.


What's new in Teranex Utility 7.0

  • Support for Teranex Mini SDI to HDMI 8K HDR

What's new in Teranex Utility 6.1.1

  • Updates for Teranex Mini SDI to HDMI 12G including:
    • Improved support for HDMI monitors
    • Reduced latency through the converter
    • LUT selection saved on power cycle
    • Improved RGB 4:4:4 support
  • Updates for Teranex Mini HDMI to SDI 12G including:
    • Support for 8-bit 4:2:0
    • Output selectable to be Level A or Level B
    • Improved timecode support
    • Improved support for Canon and Nikon DSLRs

What's new in Teranex Utility 6.1

Updates for the Teranex AV including:

  • Reduced latency for frame rate conversions in Lowest Latency mode
  • Horizontal motion for Test Pattern Generator
  • Variable transition times for Output Options
  • Capture a Still from Freeze
  • Transfer of Stills to/from computer via Setup Utility
  • HDMI outputs progressive for PsF output formats
  • HDMI Output Color Space selection
  • Improved accuracy and graphic for audio meters (Express as well)

Updates across all Teranex 1RU rack converters include:

  • Enabled REM lock button on Front Panel
  • Panel Lock via the Setup Utility Application

Download the latest Firmware and Software

  • Teranex Mini - IP Video 12G
  • SD card with software and manual
Back to Top

Cookies

We use cookies to help us offer you the best online experience. By continuing to use our website/or clicking Accept, you consent to the use of cookies in accordance with our privacy policy.