Encoders and Decoders

Teradek Cube 775 | Real-Time H.265/H.264 (HEVC/AVC) Decoder

Teradek

Cube 775

Real-Time H.265/H.264 (HEVC/AVC) Decoder

Product Code:

Product Discontinued

  • Real-Time H.265/H.264 (HEVC/AVC) Decoder
  • Dual-Band 2.4/5.8 GHz WiFi, Ethernet and USB Interfaces
  • HDMI and SDI Video Outputs (Outputs 1080p/30)
  • Camera Top Form Factor
  • Built-In Scaler
  • OLED Display
  • Powers by AC Adapter or 2-pin Connector Battery
  • Outfitted for 1/4" Mounting
Teradek MPEG Transport Stream
MPEG Transport Stream

MPEG-TS over IP (TCP or UDP) Software Licence
[]

Virtually on-set – managing productions when your crew can’t travel

The way we make movies most certainly must change. In the best of circumstances, we are a crew of 75 people jammed into a room with very little ventilation, holding our breath until we hear “CUT”. We are in close contact with one another all day long. We never really thought about it before. All of that is about to change.Kristin M Burke, The Guardian

Live production from multiple locations, on a budget

Live from Sussex and Stockport (via. London) Live Production has always had its own set of challenges, including managing a network of cameras and equipment for a show where there’s no option of a second take. Keeping up with the technology is hard enough, but what if all of this has to be done with presenters that are geographically separated, with an MCR operator that can’t get to the control room. Comprehensive hardware options have existed for years. Portable production units (PPU) combine decoders, switchers, and encoders from manufacturers such as Blackmagic Design, Datavideo, Teradek, and many more into a transport ready solution.  Software production is a real solution. It’s designed to give you most of the capabilities of a broadcast unit, in a package that’s installable on a laptop, or as a compact turnkey solution.

Teradek Firmware Version 8.2.6

New Features

  • Added Source port configuration to SRT 'caller' and MPEG-TS configuration
  • Enabled RTP Push support on 6xx encoders
  • Added codec recovery mode to 7xx encoders and decoders
  • Added additional HTTP Live configuration options
  • Added Session password option in Core mode -- enables decoder to be used in 'Sputnik' stream mode while using Core integration
  • Added CA certificate upload option

Changes and Improvements

  • Disable TLS 1.0/1.1 support
  • Disabled ICMP and TCP timestamp responses
  • Improved Slice front panel responsiveness
  • Improved NFS server compatibility
  • Prioritize RTMPS over RTMP when both URLs are valid for Facebook

Bug Fixes

  • Sputnik connections could be reset if one network interface reset
  • Record errors would pop up continuously with camera triggered recording
  • Decoder status did not update when it was unlinked from an encoder on Core
  • Fixed automatic page reloads after a reboot
  • Some Facebook titles and labels were not updated correctly when switching destinations
  • Ethernet connection was reset when switching wi-fi mode
  • Slice reset button did not work
  • Decoders did not continue attempting to reconnect to an RTSP stream
  • Snapshots, broadcast status did not work when HTTPS was enabled
  • MPEG-TS Constant bitrate settings were not updated
7xx encoders and decoders
  • Interlaced output had few duplicated lines in one field
  • T-RAX encoder stream mode was switch to RTSP after changing codec
  • Fixed UDP sputnik protocol support

Teradek Firmware Version 8.2.5

New Features

  • Added 'Auto Format Conversion' option to 7xx decoders
    • Enabled is default behavior, allows conversion between incoming streams and decoder output formats
    • Disabling this option prevents audio/video sync drifting, requires matching stream and output formats
    • More info here: https://support.teradek.com/hc/en-us/articles/360019240394-700-series-decoders-format-conversion-and-audio-video-sync
  • Added RTMPS support
  • Added individual SDI audio channel selection (Custom audio pair selection)

Changes and Improvements

  • Improved audio/video sync robustness - see auto format conversion option above
  • Improved decoder stability
  • Bitrate can be changed without interrupting broadcasts
  • Web UI mobile display improvements -- Removed separate scrolling panels in web UI and other improvements
  • Use FFMPEG to generate HLS segments
  • Moved Sputnik selection into 'Advanced Settings' on cloud services page
7xx encoders and decoders
  • Quickview stream defaults to H.264

Bug Fixes

  • Bond module was sometimes not detected
  • Core-enabled Sputnik listing did not display all servers
  • Network connections could be reset when connecting/disconnecting modems
  • HTTP Live segment size, playlist length settings were ignored
  • Fixed some issues with NFS share compatibility
  • Could not log out from YouTube via front panel
7xx encoders and decoders
  • Decoder audio/video sync would drift after some time, see auto format conversion option
  • Decoder 1080i output only displayed 1 field
  • Decoder audio playback could stop after ~7 hours in some scenarios
  • Twitch audio/video sync drifted with 50/60 fps video
6xx encoders and decoders
  • Sputnik video stream could stop after some time when streaming out to RTMP destinations
  • Bonding protocol changes did not take effect until after a codec restart
  • HLS streaming did not start automatically on boot up, required codec restart

Teradek Firmware Version 8.2.4

New Features

  • None

Changes and Improvements

  • Improved audio/video sync robustness
  • Video stream is no longer interrupted when changing bitrate

Bug Fixes

  • Interlaced video fields were swapped between frames when deinterlacer was disabled
  • HDMI signal from some Atomos recorders was not recognized

Download the latest Firmware and Software

Back to Top

Cookies

We use cookies to help us offer you the best online experience. By continuing to use our website/or clicking Accept, you consent to the use of cookies in accordance with our privacy policy.