Batteries and Power Supplies

Hypercore PRIME 3-Stud Mt

Core SWX

Hypercore PRIME 3-Stud Mt

2-Part Travel Safe 190wh, 14.8v 13.2Ah 3-Stud Hi-Draw Li-ion Battery Brick with Backlit LCD and Fuel Gauge

Product Code: CORE-HCPRIME-AG

Suggested Retail Price £560+VAT

Where to buy

Kit List

View your Kit List

Core SWX Battery Range Overview @ NAB 2018

Sebastian Kanabar talks to Zak from Core SWX about their range of Batteries

  • 2-Part Travel Safe 190wh, 14.8v 13.2Ah 3-Stud Hi-Draw Li-ion Battery Brick with Backlit LCD and Fuel Gauge
  • Large back-lit runtime LCD
  • P-tap allowing you to power any 12-16.8vdc device
  • Air travel friendly battery solution
  • Also available in V-mount version

Specifications

  • Capacity: nominal 190wh (14.8V, 13.5 Ah)
  • Each Half: 95wh (14.8V, 6.7Ah)
  • Size: 3.8 x 6.6″x2.4″
  • Weight: 2.6 lbs.
  • Normal Runtime: (25W): 7.6Hrs
  • Max Load: 10A

The Hypercore Prime employs a 2-part system to provide a higher capacity, air travel friendly battery solution, which can be legally transported without restrictions under IATA, ICAO, and UN regulations. With a total redesign and rethinking of a greater than 98wh solution, the Hypercore Prime may be the most complete battery offering in the industry today.

The battery pack can sustain larger power draws to easily handle digital cinema cameras, like the Arri Alexa, Amira, Epic, Sony F65 and Phantom. The Hypercore Prime features a higher voltage design and when coupled with the Hypercine can offer charge capacity upwards of 190wh. The higher charge voltage provides a wider discharge cycle range and greater run times. When four Prime packs are installed on the Hypercine, it provides 760wh of air travel friendly, Li-Ion power.

In addition to it’s 2-part design, the battery pack was scaled vertically, to better distribute weight across the battery mount, and reducing depth by one half inch versus the older Hypercore 190 design. The new design also features a large back-lit runtime LCD on the front. An LED grid, which wraps around to the front of the battery complements the LCD, providing charge status when charging, and can be seen from afar. The Prime is available in V-mount and 3-mounts; and have two integrated, unregulated P-tap connections on the battery allowing you to power any 12-16.8vdc device. An additional output of a USB allows accessible charging for your mobile device.

Any charger within Core SWX’ charger lineup will charge Hypercore, but the battery series is also the most cross platform, charger-compatible in the industry today. Core SWX has transitioned it’s 3-stud (Gold) mount offerings to a Hypercore “Gold” series. The Gold series is 100% compatible with Anton/BauerTM chargers firmware V3.6 and up.

AJA

  • CION

Blackmagic Design

Canon

  • EOS C300 Mark II

Sony

  • PXW-FS7
Powering Sony's 4K FS5 and FS7

Power your Sony FS5 / FS7 for hours and all your accessories!

Primed and Ready

Are your camera batteries air transport compliant?

Core SWX Expands European Distribution Network

UK Distributor Holdan to Sell Full Line of Core SWX Products including V mount and Gold Mount batteries, camera-specific batteries and multi-chargers.

Cookies

We use cookies to help us offer you the best online experience. By continuing to use our website/or clicking Accept, you consent to the use of cookies in accordance with our privacy policy.