Cube 450
TER-CUBE450
Wireless HDMI Video Decoder with 2.4G / 5.8G WiFi, mic input and USB
Teradek
<p><span style="font-weight: bold;">CUBE-450: 1ch HDMI Decoder, Dual Band WiFi & External USB Port</span></p>
<p>Teradek's Cube Decoder is a small, extremely low-power video decoder that pairs ideally with the Teradek Cube Encoder. Together they provide an end-to-end streaming video solution for filmmaking, news gathering, and ProAV.</p>
<p>Cube Decoder features extremely low power consumption and a small form-factor that is ideal for mobile applications, and using a Cube Decoder eliminates the need for using a PC to receive and decode video.</p>
<p><strong>Simple Setup</strong></p>
<p>Cube's web interface features a Setup Wizard to simplify configuration. After connecting video and powering-up Cube, create a network, logon to Cube's web interface, complete the Setup Wizard, and begin streaming video.</p>
<p><strong>Advanced Compression</strong></p>
<p>Cube uses the world's most advanced video compression – H.264 High Profile Level 4.1 and provides Blu-ray video quality. Cube's end-to-end latency is approximately 250 ms.*</p>
<p><strong>Small Size</strong></p>
<p>Cube is tiny (about the size of a deck of cards), uses only 2.5W of DC power, and weighs only 7 ounces, and mounts easily to a rail system, cage, hotshoe, or camera baseplate. Cube's line-of-sight WiFi range is approximately 300 feet when used with a high quality WiFi access point. Cube has been tested extensively with RED ONE, Arri Alexa, Panavision Genesis, Canon 5Dii, Canon 7D, various handi-cams and more.<br /><br /> *Latency measured by independent third party testers. iPad's native video decoder adds approximately 10 seconds of latency. An RTP solution for iPad will be available shortly to eliminate the latency issue.</p>
<p>With the arrival of the TeraCentral App (<a href="http://itunes.apple.com/us/app/teracentral-ios/id450925081?mt=8" target="_blank" name="">http://itunes.apple.com/us/app/teracentral-ios/id450925081?mt=8</a>), latency on the iPad is now merely a third of a second or less.</p>
<p><strong>Supported Input Resolutions</strong></p>
<ul>
<li>1080p/PsF @ 23.98/24/25/29.97/30Hz</li>
<li>1080i @ 50/59.94/60Hz</li>
<li>720p @ 50/59.94/60Hz</li>
</ul>
<p><strong>Streaming Output Resolutions</strong><br /> Cube features a built-in scaler to downscale to lower resolutions.</p>
<ul>
<li>1080p/PsF @ 23.98/24/25/29.97/30Hz</li>
<li>1080i @ 50/59.94/60Hz</li>
<li>720p @ 50/59.94/60Hz</li>
<li>480p @ 50/59.94/60Hz</li>
</ul>
<p><strong>Video Codec</strong></p>
<ul>
<li>Compression Algorithm: High Profile H.264 (L4.1), MJPEG</li>
<li>Bit Rate: 250 Kbps to 10 Mbps</li>
</ul>
<p><strong>Audio</strong></p>
<ul>
<li>Embedded Stereo over HD-SDI or HDMI</li>
<li>1/8” Stereo TRS Line Level input</li>
<li>Audio Compression: AAC-LC, MPEG Layer 2</li>
</ul>
<p><strong>Network</strong></p>
<ul>
<li>Ethernet: 10/100BASE-T</li>
<li>Network Protocols: TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP</li>
<li>Transport Protocols: RTP, RTSP, RTP over HTTP, MPEG-TS*, HTTP Live Steaming</li>
<li>Feature-rich WebUI for configuration and control</li>
<li>Point to Point (TCP or UDP), Multiple Unicast (UDP), or</li>
<li>Multicast (UDP+IGMP)*</li>
</ul>
<p><strong>Physical</strong></p>
<ul>
<li>Dimensions: 2.5”W x 3.5”D x 0.9”H</li>
<li>Weight: 7 oz.</li>
<li>Nominal Power Consumption: 2.5W</li>
<li>PoE: 802.3af Compliant</li>
<li>Auxiliary Power Input: 9-24V DC</li>
<li>2-pin power connector </li>
</ul>
<p><strong>Environmental</strong></p>
<ul>
<li>Temperature: 0 to +50 C</li>
<li>Humidity: 95% non condensing</li>
</ul>
<p> <strong>Interfaces</strong></p>
<ul>
<li>USB 2.0: 1 Powered Port (Optional)</li>
<li>WiFi: Internal 802.11n (Optional)</li>
</ul>
<p>For Teradek mounting, power and cabling accessories, <a href="/search/bits">click here</a></p>
<p> *Optional</p>
MPEG Transport Stream
TER-CUBEMPGTS
MPEG-TS over IP (TCP or UDP) Software Licence
Teradek
<p>Create a MPEG-TS over IP (TCP or UDP) video stream that is compatible with television broadcast equipment and IPTV set-top boxes. <br /><br />Compatible with all Cube™ Encoders.<br /><br />Includes the</p>
<!-- [if gte mso 9]><xml>
<w:WordDocument>
<w:View>Normal</w:View>
<w:Zoom>0</w:Zoom>
<w:TrackMoves/>
<w:TrackFormatting/>
<w:PunctuationKerning/>
<w:ValidateAgainstSchemas/>
<w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid>
<w:IgnoreMixedContent>false</w:IgnoreMixedContent>
<w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText>
<w:DoNotPromoteQF/>
<w:LidThemeOther>EN-GB</w:LidThemeOther>
<w:LidThemeAsian>X-NONE</w:LidThemeAsian>
<w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript>
<w:Compatibility>
<w:BreakWrappedTables/>
<w:SnapToGridInCell/>
<w:WrapTextWithPunct/>
<w:UseAsianBreakRules/>
<w:DontGrowAutofit/>
<w:SplitPgBreakAndParaMark/>
<w:DontVertAlignCellWithSp/>
<w:DontBreakConstrainedForcedTables/>
<w:DontVertAlignInTxbx/>
<w:Word11KerningPairs/>
<w:CachedColBalance/>
</w:Compatibility>
<w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel>
<m:mathPr>
<m:mathFont m:val="Cambria Math"/>
<m:brkBin m:val="before"/>
<m:brkBinSub m:val="--"/>
<m:smallFrac m:val="off"/>
<m:dispDef/>
<m:lMargin m:val="0"/>
<m:rMargin m:val="0"/>
<m:defJc m:val="centerGroup"/>
<m:wrapIndent m:val="1440"/>
<m:intLim m:val="subSup"/>
<m:naryLim m:val="undOvr"/>
</m:mathPr></w:WordDocument>
</xml><![endif]--><!-- [if gte mso 9]><xml>
<w:LatentStyles DefLockedState="false" DefUnhideWhenUsed="true"
DefSemiHidden="true" DefQFormat="false" DefPriority="99"
LatentStyleCount="267">
<w:LsdException Locked="false" Priority="0" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Normal"/>
<w:LsdException Locked="false" Priority="9" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="heading 1"/>
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 2"/>
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 3"/>
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 4"/>
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 5"/>
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 6"/>
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 7"/>
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 8"/>
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 9"/>
<w:LsdException Locked="false" Priority="39" Name="toc 1"/>
<w:LsdException Locked="false" Priority="39" Name="toc 2"/>
<w:LsdException Locked="false" Priority="39" Name="toc 3"/>
<w:LsdException Locked="false" Priority="39" Name="toc 4"/>
<w:LsdException Locked="false" Priority="39" Name="toc 5"/>
<w:LsdException Locked="false" Priority="39" Name="toc 6"/>
<w:LsdException Locked="false" Priority="39" Name="toc 7"/>
<w:LsdException Locked="false" Priority="39" Name="toc 8"/>
<w:LsdException Locked="false" Priority="39" Name="toc 9"/>
<w:LsdException Locked="false" Priority="35" QFormat="true" Name="caption"/>
<w:LsdException Locked="false" Priority="10" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Title"/>
<w:LsdException Locked="false" Priority="1" Name="Default Paragraph Font"/>
<w:LsdException Locked="false" Priority="11" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/>
<w:LsdException Locked="false" Priority="22" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Strong"/>
<w:LsdException Locked="false" Priority="20" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/>
<w:LsdException Locked="false" Priority="59" SemiHidden="false"
UnhideWhenUsed="false" Name="Table Grid"/>
<w:LsdException Locked="false" UnhideWhenUsed="false" Name="Placeholder Text"/>
<w:LsdException Locked="false" Priority="1" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/>
<w:LsdException Locked="false" Priority="60" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Shading"/>
<w:LsdException Locked="false" Priority="61" SemiHidden="false"
UnhideWhenUsed="false" Name="Light List"/>
<w:LsdException Locked="false" Priority="62" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Grid"/>
<w:LsdException Locked="false" Priority="63" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 1"/>
<w:LsdException Locked="false" Priority="64" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 2"/>
<w:LsdException Locked="false" Priority="65" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 1"/>
<w:LsdException Locked="false" Priority="66" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 2"/>
<w:LsdException Locked="false" Priority="67" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 1"/>
<w:LsdException Locked="false" Priority="68" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 2"/>
<w:LsdException Locked="false" Priority="69" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 3"/>
<w:LsdException Locked="false" Priority="70" SemiHidden="false"
UnhideWhenUsed="false" Name="Dark List"/>
<w:LsdException Locked="false" Priority="71" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Shading"/>
<w:LsdException Locked="false" Priority="72" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful List"/>
<w:LsdException Locked="false" Priority="73" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Grid"/>
<w:LsdException Locked="false" Priority="60" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Shading Accent 1"/>
<w:LsdException Locked="false" Priority="61" SemiHidden="false"
UnhideWhenUsed="false" Name="Light List Accent 1"/>
<w:LsdException Locked="false" Priority="62" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Grid Accent 1"/>
<w:LsdException Locked="false" Priority="63" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/>
<w:LsdException Locked="false" Priority="64" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/>
<w:LsdException Locked="false" Priority="65" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/>
<w:LsdException Locked="false" UnhideWhenUsed="false" Name="Revision"/>
<w:LsdException Locked="false" Priority="34" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/>
<w:LsdException Locked="false" Priority="29" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Quote"/>
<w:LsdException Locked="false" Priority="30" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/>
<w:LsdException Locked="false" Priority="66" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/>
<w:LsdException Locked="false" Priority="67" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/>
<w:LsdException Locked="false" Priority="68" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/>
<w:LsdException Locked="false" Priority="69" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/>
<w:LsdException Locked="false" Priority="70" SemiHidden="false"
UnhideWhenUsed="false" Name="Dark List Accent 1"/>
<w:LsdException Locked="false" Priority="71" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/>
<w:LsdException Locked="false" Priority="72" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful List Accent 1"/>
<w:LsdException Locked="false" Priority="73" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/>
<w:LsdException Locked="false" Priority="60" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Shading Accent 2"/>
<w:LsdException Locked="false" Priority="61" SemiHidden="false"
UnhideWhenUsed="false" Name="Light List Accent 2"/>
<w:LsdException Locked="false" Priority="62" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Grid Accent 2"/>
<w:LsdException Locked="false" Priority="63" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/>
<w:LsdException Locked="false" Priority="64" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/>
<w:LsdException Locked="false" Priority="65" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/>
<w:LsdException Locked="false" Priority="66" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/>
<w:LsdException Locked="false" Priority="67" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/>
<w:LsdException Locked="false" Priority="68" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/>
<w:LsdException Locked="false" Priority="69" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/>
<w:LsdException Locked="false" Priority="70" SemiHidden="false"
UnhideWhenUsed="false" Name="Dark List Accent 2"/>
<w:LsdException Locked="false" Priority="71" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/>
<w:LsdException Locked="false" Priority="72" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful List Accent 2"/>
<w:LsdException Locked="false" Priority="73" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/>
<w:LsdException Locked="false" Priority="60" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Shading Accent 3"/>
<w:LsdException Locked="false" Priority="61" SemiHidden="false"
UnhideWhenUsed="false" Name="Light List Accent 3"/>
<w:LsdException Locked="false" Priority="62" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Grid Accent 3"/>
<w:LsdException Locked="false" Priority="63" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/>
<w:LsdException Locked="false" Priority="64" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/>
<w:LsdException Locked="false" Priority="65" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/>
<w:LsdException Locked="false" Priority="66" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/>
<w:LsdException Locked="false" Priority="67" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/>
<w:LsdException Locked="false" Priority="68" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/>
<w:LsdException Locked="false" Priority="69" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/>
<w:LsdException Locked="false" Priority="70" SemiHidden="false"
UnhideWhenUsed="false" Name="Dark List Accent 3"/>
<w:LsdException Locked="false" Priority="71" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/>
<w:LsdException Locked="false" Priority="72" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful List Accent 3"/>
<w:LsdException Locked="false" Priority="73" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/>
<w:LsdException Locked="false" Priority="60" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Shading Accent 4"/>
<w:LsdException Locked="false" Priority="61" SemiHidden="false"
UnhideWhenUsed="false" Name="Light List Accent 4"/>
<w:LsdException Locked="false" Priority="62" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Grid Accent 4"/>
<w:LsdException Locked="false" Priority="63" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/>
<w:LsdException Locked="false" Priority="64" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/>
<w:LsdException Locked="false" Priority="65" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/>
<w:LsdException Locked="false" Priority="66" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/>
<w:LsdException Locked="false" Priority="67" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/>
<w:LsdException Locked="false" Priority="68" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/>
<w:LsdException Locked="false" Priority="69" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/>
<w:LsdException Locked="false" Priority="70" SemiHidden="false"
UnhideWhenUsed="false" Name="Dark List Accent 4"/>
<w:LsdException Locked="false" Priority="71" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/>
<w:LsdException Locked="false" Priority="72" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful List Accent 4"/>
<w:LsdException Locked="false" Priority="73" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/>
<w:LsdException Locked="false" Priority="60" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Shading Accent 5"/>
<w:LsdException Locked="false" Priority="61" SemiHidden="false"
UnhideWhenUsed="false" Name="Light List Accent 5"/>
<w:LsdException Locked="false" Priority="62" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Grid Accent 5"/>
<w:LsdException Locked="false" Priority="63" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/>
<w:LsdException Locked="false" Priority="64" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/>
<w:LsdException Locked="false" Priority="65" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/>
<w:LsdException Locked="false" Priority="66" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/>
<w:LsdException Locked="false" Priority="67" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/>
<w:LsdException Locked="false" Priority="68" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/>
<w:LsdException Locked="false" Priority="69" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/>
<w:LsdException Locked="false" Priority="70" SemiHidden="false"
UnhideWhenUsed="false" Name="Dark List Accent 5"/>
<w:LsdException Locked="false" Priority="71" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/>
<w:LsdException Locked="false" Priority="72" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful List Accent 5"/>
<w:LsdException Locked="false" Priority="73" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/>
<w:LsdException Locked="false" Priority="60" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Shading Accent 6"/>
<w:LsdException Locked="false" Priority="61" SemiHidden="false"
UnhideWhenUsed="false" Name="Light List Accent 6"/>
<w:LsdException Locked="false" Priority="62" SemiHidden="false"
UnhideWhenUsed="false" Name="Light Grid Accent 6"/>
<w:LsdException Locked="false" Priority="63" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/>
<w:LsdException Locked="false" Priority="64" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/>
<w:LsdException Locked="false" Priority="65" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/>
<w:LsdException Locked="false" Priority="66" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/>
<w:LsdException Locked="false" Priority="67" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/>
<w:LsdException Locked="false" Priority="68" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/>
<w:LsdException Locked="false" Priority="69" SemiHidden="false"
UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/>
<w:LsdException Locked="false" Priority="70" SemiHidden="false"
UnhideWhenUsed="false" Name="Dark List Accent 6"/>
<w:LsdException Locked="false" Priority="71" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/>
<w:LsdException Locked="false" Priority="72" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful List Accent 6"/>
<w:LsdException Locked="false" Priority="73" SemiHidden="false"
UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/>
<w:LsdException Locked="false" Priority="19" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/>
<w:LsdException Locked="false" Priority="21" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/>
<w:LsdException Locked="false" Priority="31" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/>
<w:LsdException Locked="false" Priority="32" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/>
<w:LsdException Locked="false" Priority="33" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Book Title"/>
<w:LsdException Locked="false" Priority="37" Name="Bibliography"/>
<w:LsdException Locked="false" Priority="39" QFormat="true" Name="TOC Heading"/>
</w:LatentStyles>
</xml><![endif]--><!-- [if gte mso 10]>
<style>
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
</style>
<![endif]-->
<p><span style="font-size: 11.0pt; font-family: 'Calibri','sans-serif'; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-ansi-language: EN-GB; mso-fareast-language: EN-GB; mso-bidi-language: AR-SA;">UDP Multicast Software license (free of charge)</span></p>
<ul>
<li>Creates MPEG-TS over IP (TCP or UDP)</li>
<li>Compatible with all Cube™ Encoders</li>
<li>Includes the <span style="font-size: 11.0pt; font-family: 'Calibri','sans-serif'; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-ansi-language: EN-GB; mso-fareast-language: EN-GB; mso-bidi-language: AR-SA;">UDP Multicast Software license (free of charge)</span></li>
</ul>
BIT-056
TER-BIT056
18 Watt AC Adapter 2M Cable to 2-Pin Power
Teradek
<ul>
<li>18 Watt AC Adapter 2M Cable to 2-Pin Power</li>
</ul>
BIT-118
TER-BIT118
2-Pin Power to PowerTap - Approx 45cm
Teradek
<ul>
<li>2-Pin Power to PowerTap - Approx 45cm</li>
</ul>
BIT-218
TER-BIT218
2-Pin Power to Flying Leads - Approx 45cm
Teradek
<ul>
<li>2-Pin Power to Flying Leads</li>
<li>BIT-218: Approx 45cm / 18"</li>
<li>BIT-236: Approx 90cm / 36"</li>
</ul>
BIT-318
TER-BIT318
2-Pin Power to XLR - Approx 45cm
Teradek
<ul>
<li>2-Pin Power to XLR - Approx 45cm</li>
</ul>
BIT-600
TER-BIT600
Battery adapter plate for Canon BP-945/970G 7.2 volt batteries to 2-Pin Power
Teradek
<ul>
<li>Battery adapter plate for Canon BP-945/970G 7.2 volt batteries to 2-Pin Power</li>
</ul>
BIT-610
TER-BIT610
Battery adapter plate for JVC BN-V438U 7.2 volt batteries to 2-Pin Power
Teradek
<ul>
<li>Battery adapter plate for JVC BN-V438U 7.2 volt batteries to 2-Pin Power</li>
</ul>
BIT-620
TER-BIT620
Battery adapter plate for Panasonic CGA-D54 7.2 volt batteries to 2-Pin Power
Teradek
<ul>
<li>Battery adapter plate for Panasonic CGA-D54 7.2 volt batteries to 2-Pin Power</li>
</ul>
BIT-625
TER-BIT625
Battery adapter plate for Panasonic VW-VBG6 & CGA-E/625 7.2 volt batteries to 2-Pin Power
Teradek
<ul>
<li>Battery adapter plate for Panasonic VW-VBG6 & CGA-E/625 7.2 volt batteries to 2-Pin Power</li>
</ul>
BIT-630
TER-BIT630
Battery adapter plate for Sony M Series 7.2 volt batteries to 2-Pin Power
Teradek
<ul>
<li>Battery adapter plate for Sony M Series 7.2 volt batteries to 2-Pin Power</li>
</ul>
BIT-637
TER-BIT637
Battery adapter plate for Sony B Series 14.4 volt batteries to 2-Pin Power
Teradek
<ul>
<li>Battery adapter plate for Sony B Series 14.4 volt batteries to 2-Pin Power</li>
</ul>
BIT-718
TER-BIT718
18" 4-Pin Connector to 2-Pin Connector Cable
Teradek
<ul>
<li>18" 4-Pin Connector to 2-Pin Connector Cable</li>
</ul>
BIT-708
TER-BIT708
2-Pin to 2-Pin Power - Approx 20cm
Teradek
<ul>
<li>2-Pin to 2-Pin Power - Approx 20cm</li>
</ul>
BIT-710
TER-BIT710
2-Pin Power to Barrel Adapter - Approx 45cm
Teradek
<ul>
<li>2-Pin Power to Barrel Adapter - Approx 45cm</li>
</ul>
BIT-706
TER-BIT706
2-Pin to 4-Pin Power - Approx 20cm
Teradek
<ul>
<li>2-Pin to 4-Pin Power - Approx 20cm</li>
</ul>
BIT-641
TER-BIT641
Battery for Canon BP-945/970 & 10" Barrel Adapter to 2-Pin Power
Teradek
<ul>
<li>Battery for Canon BP-945/970 & 10" Barrel Adapter to 2-Pin Power</li>
</ul>
BIT-643
TER-BIT643
Battery for Panasonic D54 - Barrel Adapter to 2-Pin Power - Approx 25cm
Teradek
<ul>
<li>Battery for Panasonic D54 - Barrel Adapter to 2-Pin Power - Approx 25cm</li>
</ul>
BIT-645
TER-BIT645
Replacement Battery for Panasonic VW-VBG6 - Barrel Adapter to 2-Pin Power - Approx 25cm
Teradek
<ul>
<li>Replacement Battery for Panasonic VW-VBG6 - Barrel Adapter to 2-Pin Power - Approx 25cm</li>
</ul>
BIT-647
TER-BIT647
Replacement Battery for Sony NP-F970/F770 - Barrel Adapter to 2-Pin Power - Approx 25cm
Teradek
<ul>
<li>Replacement Battery for Sony NP-F970/F770 - Barrel Adapter to 2-Pin Power - Approx 25cm</li>
</ul>
BIT-649
TER-BIT649
Battery for Sony PMW-EX1, EX3 & 2-Pin Power to Power Tap Cable
Teradek
<ul>
<li>Battery for Sony PMW-EX1, EX3 & 2-Pin Power to Power Tap Cable</li>
</ul>
Slice 356
TER-SLICE356
SLICE HD-SDI H.264 decoder
Teradek
<p>Slice 356 is a 1U rackmount H.264 decoder built for OB vans and enterprise applications. It enables video professionals to output low latency high definition 1080p video at up to 10Mbps via HD-SDI. Slice 356 includes 2.4/5Ghz MIMO WiFi, ethernet, and cellular connectivity options and supports multiple transport protocols, including MPEG Transport Stream, RTP/RTSP, and Zixi.</p>
<p>With the addition of Teradek's Sputnik server, Slice 356 rack mount encoders gain IFB and remote monitoring capabilities that give broadcasters full control over their IP video deployments.</p>
<div class="nav_accordian">
<ul>
<li>Rack-mount H.264 decoder</li>
<li>Supports resolutions up-to 1080p at 10Mbps</li>
<li>Low-latency HD encoding</li>
<li>HD-SDI inputs</li>
<li>Supports IFB communication</li>
<li>Remote monitoring capabilities that give broadcasters full control over their IP video deployments</li>
<li>Output a variety of stream types including:<br /> - MPEG Transport Stream<br /> - RTMP<br /> - RTSP<br /> - RTP Multicast</li>
</ul>
</div>
BIT-075
TER-BIT075
HDMI Micro Cable - 15cm
Teradek
<ul>
<li>Micro HDMI Male (Type D) to Micro HDMI (Type D) Cable</li>
<li>Length: 15cm</li>
</ul>
BIT-076
TER-BIT076
HDMI Micro to FUll HDMI Cable
Teradek
<ul>
<li>Micro HDMI Male (Type D) to Full HDMI (Type A) Cable</li>
<li>Length: 45cm</li>
</ul>
BIT-077
TER-BIT077
HDMI Micro HDMI Cable - 30cm
Teradek
<div class="nav_accordian">
<ul>
<li>Micro HDMI Male (Type D) to Micro HDMI (Type D) Cable</li>
<li>Length: 30cm</li>
</ul>
</div>
NIBL-620
TER-NIBL620
Battery Adapter Plate Panasonic CGA-D54 7.2v battery to Barrel Connector
Teradek
<ul>
<li>Battery Adapter Plate Panasonic CGA-D54 7.2v battery to Barrel Connector</li>
</ul>
NIBL-625
TER-NIBL625
Battery Adapter Plate Panasonic VBG6 7.2v battery to Barrel Connector
Teradek
<ul>
<li>Battery Adapter Plate Panasonic VBG6 7.2v battery to Barrel Connector</li>
</ul>
BIT-010
TER-BIT010
Hotshoe Mounting Hardware for Cube and Bond
Teradek
<ul>
<li>Hotshoe Mount for Teradek Bond and Cube</li>
<li>2.5 inch L. Thumb Screw</li>
</ul>
BIT-012
TER-BIT012
Hotshoe Mounting Hardware for Bolt
Teradek
<ul>
<li>Hotshoe Mount for Teradek Bolt</li>
<li>1.25 inch Thumb Screw</li>
</ul>
BIT-070
TER-BIT070
Type A to Mini B USB Cable
Teradek
<ul>
<li>Type A to Mini B USB Cable</li>
</ul>
CUBIT-020
TER-CUBIT020
Replacement Dual Band Wireless Antenna
Teradek
<ul>
<li>Replacement wireless antenna for the Teradek Cube</li>
</ul>
CUBIT-010
TER-CUBIT010
Hotshoe Mounting Hardware for Cube
Teradek
<ul>
<li>Hotshoe Mount for the Teradek Cube</li>
<li>1.1 inch L. Thumb Screw</li>
</ul>
NIBL-500
TER-NIBL500
Battery adapter plate for Canon LP-E6 7.2V to Barrel Connector
Teradek
<ul>
<li>Battery adapter plate for Canon LP-E6 batteries to Barrel Connector</li>
</ul>
Live:Air
TER-LIVEAIR
Video production suite for iOS
Teradek
<p><strong>What’s Your Story?</strong><br /><br />Show the world what you love to do with the new Live:Air (Pronounced “Live to Air”) video production suite for iOS. With a host of real-time video editing tools and support for all of the popular live streaming services, the Live:Air app helps you share your experiences online with a professional look that will keep viewers locked to their screens.<br /><br /><strong>Live production at the touch of a finger</strong><br /><br />Add style to your online broadcast with Live:Air’s selection of graphics, text overlays, and other visual effects. Mix up your live stream with pre-recorded video clips, or even switch between multiple live video feeds, all with elegant looking transitions. <br /><br /><strong>Keep your eye on the stream</strong><br /><br />Live:Air’s video management system allows you to preview and monitor each video source and audio input, track on-air uptime, and start/stop broadcast from an intuitive touchscreen interface. Even if you’re using only a single video feed, Live:Air can superimpose images and text effortlessly.<br /><br /><strong>A selection of sources</strong><br /><br />Import live video from your GoPro™, camcorder, or DSLR using any WiFi-enabled Teradek encoder, including the VidiU Mini. Every source is automatically discovered and configured for you instantly, even if you add more feeds during a live broadcast. For those without a camera, Live:Air can use live video from other iOS devices or you can simply begin streaming with nothing more than your iPad’s built-in camera.<br /><br /><strong>Intuitive presets and controls</strong><br /><br />With a T-Bar for manual transition control, a smart workspace for overlay design, and a built-in audio mixer panel, enthusiasts and professionals alike will feel right at home on this mobile live video production platform.<br /><br /><strong>Stream to any destination</strong><br /><br />Easily stream to popular video platforms like Ustream, Livestream, and YouTube Live or build your own using Wowza Streaming Engine™ to take advantage of more advanced features.</p>
<ul>
<li>Supports multiple wireless video inputs (up to 4) using Teradek encoders, iOS cameras and other devices via the RTSP licence. Support for Cube, VidiU, VidiU mini and Clip</li>
<li>Includes transitions, overlays, cuts, fades and a host of other features</li>
<li>Can be used to overlay text or graphics for a single video feed. This is very important for high schools or churches where they may only be using a single camera</li>
<li>This application can stream right to the web off a 3G/4G LTE connection (requires LTE iPad) or it must be connected to a local network with an internet connection</li>
</ul>
BIT-026
TER-BIT026
Antenna Array for Beam, Bolt 600, 1000, 2000 and 3000 receivers
Teradek
<ul>
<li>Panel Antenna Array</li>
<li>5GHz 3x16dBi 2x14 dBi Black with with a receiver mounting bracket</li>
<li>5GHz MIMO panel antenna designed for use with Beam and Bolt receivers</li>
<li>Offers a more resilient wireless transmission, especially in challenging RF conditions</li>
</ul>
<p>(it will not increase range)</p>
BIT-021
TER-BIT021
Replacement Wireless Antenna for Bolt Pro 2000 TX
Teradek
<ul>
<li>Replacement Wireless Antenna, Bolt Pro 2000 TX</li>
</ul>
BIT-022
TER-BIT022
Replacement Wireless Antenna for Bolt Pro 600 / 2000 RX
Teradek
<ul>
<li>Replacement Wireless Antenna for:
<ul>
<li>Bolt 500,1000 (TX/RX)</li>
<li>Bolt 3000 RX</li>
</ul>
</li>
</ul>
Cube 655
TER-CUBE655
HD-SDI Encoder 10/100 USB 2.4/5.8GHz
Teradek
<p><strong>The world’s most versatile encoder evolves.</strong><br />The Cube 600 series is the latest addition to the Teradek family of encoders. The new Cube 605 and 655 builds upon the success of its predecessors and features several significant upgrades including a new dedicated embedded network processor that supports GigE for higher bitrates, enhanced 802.11ac Wi-Fi for longer range, dual HDMI/HD-SDI inputs, and built-in bonding with ShareLink™. This new addition to the Cube line aims to provide the next generation of versatile encoding for independent content creators and professionals alike.</p>
<p><strong>On-set and in the Cloud</strong><br />Cube provides ultimate portability by distributing live HD video to iPads and iPhones for producers, clients, and others on set. Supporting up to 5 iOS and/or Android devices, users can view the feed at an increased range with Cube 655’s robust 802.11ac Wi-Fi. In addition to local playback, the new Cube 600 series integrates Frame.io’s cloud-based review and dailies workflow, ultimately enabling collaboration with entire teams anywhere around the wor</p>
<h4>What’s New?</h4>
<ul>
<li>Dual HDMI/HD-SDI Input</li>
<li>802.11ac Wi-Fi</li>
<li>10/100/1000 Gigabit Ethernet</li>
<li>Bidirectional IFB</li>
<li>3D LUT & CDL Color Management</li>
<li>ShareLink™</li>
<li><strong>IFB</strong>: Allows the studio to communicate with remote camera crews</li>
</ul>
<ul>
<li>1 x 2-pin Connector to 18W AC Power Adapter</li>
<li>1 x Ethernet Cable</li>
<li>1 x SDI 10 inch Cable (BNC to BNC)</li>
<li>1 x HDMI 36 inch Cable (Full Type A to Full Type A)</li>
<li>1 x Hot Shoe Adapter</li>
<li>2 x Wireless Antennas (2dBi 2.4/5.8 Ghz)</li>
</ul>
Stream Reader
TER-TRISTREAM
Stream Reader Plugin for TriCaster
Teradek
<p>The StreamReader plugin for TriCaster models 410, 460, 860 and 8000 lets you import HD video streams from multiple Teradek encoding devices or third-party encoders in MPEG Transport Stream, RTSP or Teradek Streaming (TDS) formats. The plugin has a built-in jitter buffer that compensates for network jitter. Buffer delay can be controlled separately for each camera; the values can be set manually or automatically. Lip-sync correction is also possible on a per-camera basis. When several cameras are used to shoot the same event and camera synchronization is required, it can be achieved by manually adjusting jitter buffer delays for each camera, or by using the special synchronization mode, in which the same stream delay is maintained for all cameras that are using this mode.<br /><br />The plugin is free and supports the following streaming protocols:</p>
<ul>
<li>RTSP from Teradek products</li>
<li>MPEG Transport Stream over TCP and TCP-Pull</li>
<li>Teradek Streaming Protocol (TDS)</li>
</ul>
<p><br />This license unlocks the following additional modes:</p>
<ul>
<li>RTSP feeds from any source</li>
<li>MPEG Transport Stream over UDP and Multicast</li>
</ul>
Cube 605
TER-CUBE605
HD-SDI Encoder 10/100 USB
Teradek
<h4>Designed for Professionals</h4>
<p>Cube is manufactured in the USA and features 3G-SDI and HDMI inputs. Cube’s rugged aluminum chassis and professional locking 2-Pin Connector connector ensure it’s ready for constant use in any environment.</p>
<h4>Higher Bitrates</h4>
<p>The Cube 600 series encodes video at bitrates up to 15 Mbps for pristine quality in any application. When bandwidth is limited, adaptive bitrate allows Cube to automatically adjust and stream at the highest quality achievable.</p>
<h4>iPad Monitoring for All</h4>
<p>Cube 600 supports monitoring on up to 6 devices iOS devices simultaneously so clients, crew, and director can all see the action.</p>
<h4>Built-in Color Grading</h4>
<p>Support for 33 point 3D LUTs and Pomfort LiveGrade integration allows your creative team to monitor graded footage on set or off. Looks can be applied to the stream itself or controlled independently within the TeraView app.</p>
<h4>All New User Interface</h4>
<p>Cube's intuitive new user interface makes it easier than ever to configure your device. Pages load more quickly, configuration changes apply instantly, and all encoder statuses are updated dynamically.</p>
<h4>Onboard Recording</h4>
<p>Cube’s built-in SD card slot gives you the option to save high quality backup recordings for post-event editing.*</p>
<p>*Recorded video file bitrate and resolution match encoded stream quality.</p>
<h4>Test Pattern Generator</h4>
<p>A configurable test pattern generator allows you to test your stream without connecting a video source and prevents interruptions if video sync is lost.</p>
<ul>
<li>H.264 (AVC) Encoder SDI/HDMI GbE</li>
<li>Ethernet and USB Interfaces (No WiFi)</li>
<li>HDMI and SDI Video Inputs</li>
<li>Camera Top Form Factor</li>
<li>Built-In Color Grading</li>
<li>On-Board SD Card Recording</li>
<li>Two-Pin Connector-Type Power Input</li>
</ul>
<ul>
<li>1 x 2-pin Connector to 18W AC Power Adapter</li>
<li>1 x Ethernet Cable</li>
<li>1 x SDI Cable (BNC to BNC)</li>
<li>1 x HDMI Cable (Full Type A to Full Type A)</li>
<li>1 x Hot Shoe Adapter</li>
<li>1 x 1-Year Warranty</li>
</ul>
COLR
TER-COLR
Real-time wireless LUT box with camera control
Teradek
<p><strong>COLR</strong> is a real-time LUT box, camera control bridge, and HDMI/SDI cross-converter in one tiny package. COLR integrates with Pomfort LiveGrade Pro, allowing DITs and colourists to give everyone the right look.</p>
<h4>Looks Mean Everything</h4>
<p>During camera prep, on your cart, through colour timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 33 point 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button.</p>
<h4>Works with Pomfort LiveGrade</h4>
<p>COLR integrates with Pomfort LiveGrade Pro, giving you fine control of your looks over Wi-Fi, Ethernet, or via USB. Looks can be saved directly to COLR, and LiveGrade supports multiple simultaneous devices.</p>
<h4>Universal Support</h4>
<p>COLR supports just about every camera signal on the market -- from GoPro to ALEXA. RAW or LOG signals can be converted for monitoring, and every camera's look can be synced to show directors their vision while shooting. COLR also enables wireless camera control for Ethernet-enabled cameras, including FoolControl for RED digital cinema cameras and ARRI packages.</p>
<h4>No Monitor Left Behind</h4>
<p>Whether your production requires industry standard colour and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. Versatility is no longer a luxury with COLR’s built-in signal converter and simultaneous HDMI and SDI outputs.</p>
<h4>Connected Set</h4>
<p>With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final colour grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.</p>
<ul>
<li>Real-time LUT box</li>
<li>HDMI/SDI cross-converter</li>
<li>Camera control bridge</li>
<li>Integrates with Pomfort LiveGrade Pro</li>
<li>Feature-rich iOS UI for configuration and control</li>
<li>Simple WebUI for network configuration</li>
<li>OLED LCD Display with joystick navigation buttons</li>
<li>On/Off switch</li>
<li>Powered USB 2.0 host port</li>
<li>CDL/1024 1D LUT (supports 10-bit colour)</li>
<li>33x33x33 3D LUT (supports 10-bit colour)</li>
<li>Custom OSD tools</li>
<li>Built in Video Scaler, Deinterlacer, frame rate converter</li>
<li>Save and Load screen images</li>
<li>Test Pattern Generator for Calibration</li>
<li>Network Protocols: TCP/IP, UDP, HTTP, DHCP, NTP (TBD), SSL</li>
<li>2 Pin Power input</li>
<li>Nominal Power Consumption: 5W - 8W</li>
<li>Auxiliary Power Input: 6-28V DC</li>
<li>Dimensions: 2"x1"x4" (WxDxH)</li>
<li>Weight: 6oz</li>
</ul>
<ul>
<li>1 x Power Supply Unit 2pin Power to 18 w AC Adapter</li>
<li>2 x Antennas Straight Wifi 5.8 GHz</li>
<li>1 x Mini-USB to USB cable</li>
</ul>
COLR Duo
TER-COLRDUO
Real-time wireless LUT box with camera control - dual 3G-SDI
Teradek
<p>COLR is a real-time LUT box, camera control bridge, and HDMI/SDI cross-converter in one tiny package. COLR integrates with Pomfort LiveGrade Pro, allowing DITs and colourists to give everyone the right look.</p>
<h4>Looks Mean Everything</h4>
<p>During camera prep, on your cart, through color timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors.</p>
<h4>Works with Pomfort LiveGrade</h4>
<p>COLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application.</p>
<h4>Monitor Calibration with SpectraCal</h4>
<p>Whether your production requires industry standard color and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal’s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide.</p>
<h4>Connected Set</h4>
<p>With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final color grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.</p>
<p>All the functionality of the original <a href="/Teradek/COLR">COLR</a> with a second 3G-SDI output, allowing a unique 33-point 3D LUT and CDL or 1D LUT to be applied to each output.</p>
<ul>
<li>Real-time wireless LUT box with camera control - dual 3G-SDI</li>
<li>Outputs 2 independent 10-bit 33pt 3D LUTs simultaneously</li>
<li>Integrated with Pomfort LiveGrade, SpectraCal CalMAN, and FoolControl</li>
<li>Panasonic, ARRI, RED and Pahtom remote camera control</li>
<li>Dimensions: 50.8 x 25.4 x 101.6 mm (2” x 1” x 4”)</li>
<li>Weight: 170.1g (6oz)</li>
</ul>
<h4>Video Inputs</h4>
<ul>
<li>1x 3G/HD/SD-SDI:BNC</li>
</ul>
<h4>Video Outputs</h4>
<ul>
<li>2x 3G/HD/SD-SDI:BNC</li>
</ul>
<h4>Audio Input/Output</h4>
<ul>
<li>Embedded SDI Audio Input</li>
</ul>
<h4>Colour Sampling</h4>
<ul>
<li>SDI Input/Output: 10-bit YCrCb 4:2:2</li>
</ul>
<h4>Tx Hdmi Sdi Converter Summary</h4>
<ul>
<li>None</li>
</ul>
<h4>Supported Resolutions</h4>
<ul>
<li><strong>1080p</strong> 23.98/24/25/29.97/30/50/59.94/60</li>
<li><strong>1080i</strong> 50/59.94/60</li>
<li><strong>1080PsF</strong> 23.98/24/25</li>
<li><strong>720p</strong> 50/59.94/60</li>
<li><strong>480i</strong> 59.94, 576i50</li>
</ul>
<ul>
<li>1 x COLR Duo</li>
<li>1 x Power Supply Unit 2pin Lemo to 18W AC Adapter(Int) - 6 ft. Cable</li>
<li>2 x SDI - BNC to BNC Cable, 10in</li>
<li>2 x Antenna 2dBi WiFi 2.4/5.8 GHz</li>
<li>1 x Mini-USB to USB - 18 in. Cable</li>
<li>1 x Quickstart Guide - COLR</li>
<li>1 x Free Trial Code for Pomfort LiveFrade Pro</li>
<li>1-Year Warranty</li>
</ul>
Bolt 1000 3G-SDI Receiver
TER-BOLT-957
SDI Wireless Video Receiver - 1000ft
Teradek
<ul>
<li>SDI Wireless Video Receiver - 1000ft</li>
<li><strong>Longer Range</strong><br /> Transmit visually lossless video up to 1000ft or 3000ft with no delay</li>
<li><strong>2 New DFS Channels</strong><br /> Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels</li>
<li><strong>20% Smaller Chassis</strong><br /> Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed</li>
<li><strong>More Robust Than Ever Before</strong><br /> Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created</li>
<li><strong>Rapid Reconnection</strong><br /> Reconnect times during a dropped link are now instantaneous once you move back into range</li>
<li><strong>Individual Identity</strong><br /> Easily identify which Bolt TX and RX work together with removable colored top plates</li>
<li><strong>Support for Spectrum Analyzer</strong><br /> You can now view which channels are not ideal for Bolt whenever you arrive on set. No more guessing, no more mystery interference.</li>
<li>Supports Wired Pairing</li>
<li>Metadata and timecode support</li>
<li>3D LUTs</li>
<li>Dual inputs/outputs</li>
<li>Multicast capable</li>
<li>Manual frequency selection</li>
<li>USB 3.0 GRAB Engine included</li>
</ul>
<ul>
<li>Bolt Pro 1000 3G-SDI Receiver</li>
<li>5x Wireless Antennas</li>
<li>1/4 20" Thumb Screw</li>
<li>1/2 20" Lightstand Adapter</li>
<li>SDI Cable</li>
<li>PSU 2-Pin Lemo 18W</li>
<li>1-Year Warranty</li>
</ul>
BIT-777
TER-BIT777
3 Holes Velcro Mounting Bracket for Bolt
Teradek
<ul>
<li>Generic 3 Holes Velcro Mounting Bracket for Bolt</li>
<li>Keep your Bolt unit looking nice with this mounting bracket for attaching velcro and preventing heat from the Bolt unit from melting the velcro.</li>
</ul>
BIT-780-1
TER-BIT780-1
Yellow Identification Plate for Bolt 1000/3000 Receiver
Teradek
<ul>
<li>Yellow Identification Plate for Bolt 1000/3000 Receiver</li>
</ul>
BIT-783-1
TER-BIT783-1
Blue Identification Plate for Bolt 1000/3000 Receiver
Teradek
<ul>
<li>Blue Identification Plate for Bolt 1000/3000 Receiver</li>
</ul>
BIT-782-1
TER-BIT782-1
Green Identification Plate for Bolt 1000/3000 Receiver
Teradek
<ul>
<li>Green Identification Plate for Bolt 1000/3000 Receiver</li>
</ul>
BIT-781-1
TER-BIT781-1
Red Identification Plate for Bolt 1000/3000 Receiver
Teradek
<ul>
<li>Red Identification Plate for Bolt 1000/3000 Receiver</li>
</ul>
BIT-780
TER-BIT780
Yellow Identification Plate for Bolt 1000/3000 Transmitter
Teradek
<ul>
<li>Yellow Identification Plate for Bolt 1000/3000 Transmitter</li>
</ul>
BIT-781
TER-BIT781
Red Identification Plate for Bolt 1000/3000 Transmitter
Teradek
<ul>
<li>Red Identification Plate for Bolt 1000/3000 Transmitter</li>
</ul>
BIT-782
TER-BIT782
Green Identification Plate for Bolt 1000/3000 Transmitter
Teradek
<ul>
<li>Green Identification Plate for Bolt 1000/3000 Transmitter</li>
</ul>
BIT-783
TER-BIT783
Blue Identification Plate for Bolt 1000/3000 Transmitter
Teradek
<ul>
<li>Blue Identification Plate for Bolt 1000/3000 Transmitter</li>
</ul>
NIBL-056
TER-NIBL056
18 Watt AC Adapter 2m Cable to Barrel Connector
Teradek
<ul>
<li>18 Watt AC Adapter to Barrel Connector</li>
<li>2m / 6ft Cable</li>
</ul>
BIT-779
TER-BIT779
Cube 655 Hot Shoe Mounting Combo Kit
Teradek
<ul>
<li>Hot Shoe Mounting Combo Kit for the Cube 655</li>
</ul>
Serv Pro
TER-SERVPRO
High definition real-time video monitoring to iPhones and iPads over WiFi
Teradek
<p>Serv Pro is a hardware streaming device that allows up to 10 iPhones and iPads to monitor a video feed in HD over WiFi. Perfect for script supervisors, hair & makeup, classrooms, and documentary shoots, Serv Pro offers a compelling monitoring alternative to zero delay wireless video systems.</p>
<h4>Stream over local networks</h4>
<p>Serv connects to cameras via HDMI or 3G-SDI and streams over 2.4 / 5Ghz WiFi or ethernet to iOS devices connected to the same network. Each unit supports up to 10 simultaneous connections, whether you connect directly to Serv Pro or to the same wireless access point.</p>
<h4>High definition and low latency</h4>
<p>Each Serv Pro feed is streamed at 1080p with just a 2 frame delay. The video stream also includes a stereo audio channel that can be enabled or disabled from the Vuer iOS application.</p>
<h4>Works harmoniously with Teradek Bolt and Paralinx products</h4>
<p>Serv Pro operates on 5Ghz WiFi and is a complementary tool to zero delay wireless systems like the Bolt series. With proper frequency management, these systems will work together without interference.</p>
<h4>Professional monitoring with VUER</h4>
<p>The VUER application for iOS puts an entire cinematographers toolset in your hands, allowing you to use vectorscopes, false color, focus peaking, and more on each Serv Pro feed you’re monitoring. The application is free to use and can be customized to to allow users full or limited access to the toolset.</p>
<h4>Monitor up to 4 live feeds at one time</h4>
<p>VUER can monitor up to 4 Serv Pro feeds at the same time, all in 1080p and all at the same 2 frame delay.</p>
<p>Serv Pro is a hardware streaming device that allows up to 10 iPhones and iPads to monitor a video feed in HD over WiFi. Perfect for script supervisors, hair & makeup, classrooms, and documentary shoots, Serv Pro offers a compelling monitoring alternative to zero delay wireless video systems.</p>
<h4>Specifications</h4>
<ul>
<li>Video Inputs: 1 x SD/HD-SDI (75 Ohm BNC) | 1 x HDMI Type-A receptacle</li>
<li>Supported Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60* | 1080i 50/59.94/60 | 1080PsF 23/24/25/29/30 | 720p 50/59.94/60 | 576i | 480i | 480p (for HDMI input only) | 576p (for HDMI input only) | *Ingests 1080p50/59/60</li>
<li>Video Compression: H.264, Baseline, Main and High Profile</li>
<li>Supported Video Bitrate: 250 Kbps to 15 Mbps (*15 Mbps (wired), 10 Mbps (WiFi))</li>
<li>Supported Video Bitrate Details: 5 Mbps | 4 Mbps | 3 Mbps | 2.5 Mbps | 1.5 Mbps | 1 Mbps | 750 Kbps</li>
<li>Supported Output Resolutions 16:9: Configured via Vuer app: 1920x1080 | 1536x864 | 1280x720 | 960x540 | 480 | 260 | 270</li>
<li>Test Pattern Generator Support: Supports Custom Test Pattern</li>
<li>Video Format Conversion Support: Built in Video Scaler and Deinterlacer</li>
</ul>
<ul>
<li>1 x 2-pin Connector to 30W AC Power Adapter</li>
<li>1 x Ethernet Cable</li>
<li>1 x SDI 10 inch Cable (BNC to BNC)</li>
<li>1 x HDMI 36 inch Cable (Full Type A to Full Type A)</li>
<li>1 x Hot Shoe Adapter</li>
<li>1 x 1-Year Warranty</li>
<li>2 x Wireless Antennas (2dBi 2.4/5.8 Ghz)</li>
</ul>
Link
TER-LINK
High performance 802.11ac WiFi access point built for the video industry
Teradek
<ul>
<li>High performance 802.11ac WiFi access point built for the video industry</li>
<li>Housed in an aluminum chassis with a variety of clever mounting options, Link fits seamlessly onto DIT carts, light stands, and just about anywhere on set</li>
<li>Connects <a href="/Teradek/Serv">Serv</a> and Field Monitor with maximum range and reliability</li>
</ul>
Cube 755
TER-CUBE755
H.265 (HEVC) and H.264(AVC) Camera Top Encoder
Teradek
<h4>What is HEVC?</h4>
<p>HEVC, also known as H.265, is a next-generation compression standard that offers a number of enhancements over H.264. Compared to AVC (H.264) compression, HEVC is 50% more efficient, which translates into maintaining the same video quality at half the bitrate or double the video quality at the same bitrate.</p>
<h4>The new Cube 700 and Slice 756 series</h4>
<p>The new Cube 700 and Slice 756 series bring the latest in compression technology at a size and price point never before seen.</p>
<h4>What makes HEVC Cube and Slice unique</h4>
<ul>
<li>Can use both HEVC (H.265) and AVC (H.264) High Profile compression</li>
<li>Compatible with Core transcoding engine. This allows you to take advantage of HEVC encoding when streaming to Core, while delivering your content in AVC to your destination.</li>
<li>Dual input (HDMI + 3G-SDI)</li>
<li>Compatible with the new Bond expansion module, allowing you to turn your Cube 700 series into a professional bonding solution</li>
<li>GigE and 2.4 / 5.8Ghz 802.11ac WiFi built-in</li>
<li>Bitrate support up to 30Mbps</li>
<li>Streaming resolution support up to 1080p60</li>
<li>Compatible with T-21, Sencore, and Vitec HEVC decoders</li>
<li>Uses just 6W of power</li>
</ul>
<h4>What can Cube and Slice codecs do?</h4>
<ul>
<li>Stream to any online video platform, such as Facebook, Youtube, Twitch, Periscope, and more.</li>
<li>Stream point-to-point to decoders over the internet or on local networks with latency as low as 80ms</li>
<li>Comprehensive protocol support: MPEG-TS, RTSP, RTMP, HLS, TDS</li>
<li>Monitor your live video feed on an iOS device for confidence or local configuration</li>
<li>Turn your camera into a wireless video feed for Teradek’s Live:Air iOS switcher application</li>
</ul>
<ul>
<li>H.265 (HEVC) and H.264(AVC) Camera Top Encoder</li>
<li>Real-Time H.265(HEVC) and H.264(AVC) Encoder</li>
<li>Dual-Band 2.4/5.8 GHz WiFi, Ethernet and USB Interfaces</li>
<li>HDMI and SDI Video Inputs</li>
<li>Camera Top Form Factor</li>
<li>Built-In Color Grading</li>
<li>On-Board SD Card Recording</li>
<li>Two-Pin Connector-Type Power Input</li>
</ul>
<ul>
<li>1 x Cube 755</li>
<li>2 x 2dBi Antennas (2.4/5.8 GHz)</li>
<li>1 x HDMI & 1 SDI Cable</li>
<li>1 x Hot Shoe Adapter</li>
<li>1 x Ethernet Cable</li>
<li>2-pin connector to 18W Power Adapter</li>
</ul>
Cube 775
TER-CUBE775
Real-Time H.265/H.264 (HEVC/AVC) Decoder
Teradek
<ul>
<li>Real-Time H.265/H.264 (HEVC/AVC) Decoder</li>
<li>Dual-Band 2.4/5.8 GHz WiFi, Ethernet and USB Interfaces</li>
<li>HDMI and SDI Video Outputs (Outputs 1080p/30)</li>
<li>Camera Top Form Factor</li>
<li>Built-In Scaler</li>
<li>OLED Display</li>
<li>Powers by AC Adapter or 2-pin Connector Battery</li>
<li>Outfitted for 1/4" Mounting</li>
</ul>
Node
TER-NODEEU
3G / 4G / LTE modem
Teradek
<p>To get the most out of your Bond, Teradek have introduced their first line of Teradek modems called Nodes.</p>
<ul>
<li>Nodes come with USB or 4-Pin connections, allowing you to use them with any of our existing encoder line up (USB) or with the new Bond module that will ship with your choice of USB or 4-Pin inputs</li>
<li>Each Node corresponds to a region around the world (North America, Europe, etc..) and packs a high powered radio compatible with all major cellular data frequencies for your selected region</li>
<li>All you need to provide is a SIM card to place inside the ruggedized aluminum chassis and you’re all set to achieve extraordinary connectivity</li>
</ul>
<p>You might be wondering why we chose to offer both the Bond and the Node with 4-Pin connections in addition to USB. 4-Pin connectors ensure the modems never detach when connected to Bond and they also prevent the elements from sneaking into USB ports during poor weather conditions.</p>
BIT-084
TER-BIT084
N-Male to RP-SMA Plug Cable for Antenna Array
Teradek
<ul>
<li>N-type male connector toRP-SMA connector Cable</li>
<li>Can be used to connect a Bolt or a Beam to a Panel Antenna</li>
<li>Length: 12" / 30cm</li>
</ul>
BIT-013
TER-BIT013
1/4-20 inch Lightstand Adapter
Teradek
<ul>
<li>1/4-20 inch Lightstand Adapter</li>
<li>Designed for use with any light stand that has a 5/8" (16mm) top stud that will allow for either horizontal or vertical mounting of your Teradek device</li>
<li>Construction: Aluminum</li>
<li>Weight: 3.2 oz / 90 g</li>
<li>Thread Size: 1/4"-20</li>
</ul>
<ul>
<li>1 x 9 pcs screwdriver kit</li>
</ul>
BIT-040
TER-BIT040
Coiled SDI BNC to BNC Cable
Teradek
<ul>
<li>25cm Coiled SDI BNC to BNC Cable</li>
</ul>
Bond-758
TER-BOND758
Bond 4 Pin Locking + Cube 755
Teradek
<h4>So what is HEVC?</h4>
<p>HEVC, also known as H.265, is a next-generation compression standard that offers a number of enhancements over H.264. Compared to AVC (H.264) compression, HEVC is 50% more efficient, which translates into maintaining the same video quality at half the bitrate or double the video quality at the same bitrate.</p>
<p>In other words, H.265 will save you on bandwidth overhead and cost, especially if you’re transmitting over cellular networks.</p>
<ul>
<li>Bond 4 Pin Locking + Cube 755</li>
</ul>
<h4><a href="/Teradek/Cube+755">Cube 755</a></h4>
<ul>
<li>HEVC Encoder</li>
<li>Dual input (HDMI + SDI)</li>
<li>Compatible with the new Bond module</li>
<li>Available with GigE and dual band 802.11ac WiFi</li>
<li>700 series supports up to 1080p60 streaming resolution/frame rates</li>
<li>H.265 - Stream high quality video content at half the bandwidth required of AVC (H.264) compression</li>
<li><a href="/Teradek/Cube+755">More..</a></li>
</ul>
<h4><a href="/Teradek/Bond+4+Pin+locking">Bond 4 Pin locking</a></h4>
<ul>
<li>Stream over up to 5 3G/4G/LTE connections - 4-Pin connections</li>
<li>Convert your Cube 600, 700, and 800 series into a 5-modem cellular bonding powerhouse</li>
<li>Stream over a combination of 5 3G/4G/LTE modems, Ethernet, and WiFi, allowing you to achieve higher bit rates and more bandwidth redundancy than with traditional streaming methods</li>
<li><a href="/Teradek/Bond+4+Pin+locking">More..</a></li>
</ul>
Bond-757
TER-BOND757
Bond USB + Cube 755
Teradek
<h4>So what is HEVC?</h4>
<p>HEVC, also known as H.265, is a next-generation compression standard that offers a number of enhancements over H.264. Compared to AVC (H.264) compression, HEVC is 50% more efficient, which translates into maintaining the same video quality at half the bitrate or double the video quality at the same bitrate.</p>
<p>In other words, H.265 will save you on bandwidth overhead and cost, especially if you’re transmitting over cellular networks.</p>
<ul>
<li>Bond USB + Cube 755</li>
</ul>
<h4><a href="/Teradek/Cube+755">Cube 755</a></h4>
<ul>
<li>HEVC Encoder</li>
<li>Dual input (HDMI + SDI)</li>
<li>Compatible with the new Bond module</li>
<li>Available with GigE and dual band 802.11ac WiFi</li>
<li>700 series supports up to 1080p60 streaming resolution/frame rates</li>
<li>H.265 - Stream high quality video content at half the bandwidth required of AVC (H.264) compression</li>
<li><a href="/Teradek/Cube+755">More..</a></li>
</ul>
<h4><a href="/Teradek/Bond+USB">Bond USB</a></h4>
<ul>
<li>Stream over up to 5 3G/4G/LTE connections - USB Connections</li>
<li>Convert your Cube 600, 700, and 800 series into a 5-modem cellular bonding powerhouse</li>
<li>Stream over a combination of 5 3G/4G/LTE modems, Ethernet, and WiFi, allowing you to achieve higher bit rates and more bandwidth redundancy than with traditional streaming methods</li>
<li><a href="/Teradek/Bond+USB">More..</a></li>
</ul>
Bond-657
TER-BOND657
Bond USB + Cube 655
Teradek
<ul>
<li>Bond USB + Cube 655</li>
</ul>
<h4><a href="/Teradek/Cube-655">Cube 655</a></h4>
<ul>
<li>Dual HDMI/HD-SDI Input</li>
<li>802.11ac Wi-Fi</li>
<li>10/100/1000 Gigabit Ethernet</li>
<li>Bidirectional IFB</li>
<li>3D LUT & CDL Color Management</li>
<li>ShareLink™</li>
<li>IFB: Allows the studio to communicate with remote camera crews</li>
<li><a href="/Teradek/Cube-655">More..</a></li>
</ul>
<h4><a href="/Teradek/Bond+USB">Bond USB</a></h4>
<ul>
<li>Stream over up to 5 3G/4G/LTE connections - USB Connections</li>
<li>Convert your Cube 600, 700, and 800 series into a 5-modem cellular bonding powerhouse</li>
<li>Stream over a combination of 5 3G/4G/LTE modems, Ethernet, and WiFi, allowing you to achieve higher bit rates and more bandwidth redundancy than with traditional streaming methods</li>
<li><a href="/Teradek/Bond+USB">More..</a></li>
</ul>
Bond-658
TER-BOND658
Bond 4 Pin Locking + Cube 655
Teradek
<ul>
<li>Bond 4 Pin Locking + Cube 655</li>
</ul>
<h4><a href="/Teradek/Cube-655">Cube 655</a></h4>
<ul>
<li>Dual HDMI/HD-SDI Input</li>
<li>802.11ac Wi-Fi</li>
<li>10/100/1000 Gigabit Ethernet</li>
<li>Bidirectional IFB</li>
<li>3D LUT & CDL Color Management</li>
<li>ShareLink™</li>
<li>IFB: Allows the studio to communicate with remote camera crews</li>
<li><a href="/Teradek/Cube-655">More..</a></li>
</ul>
<h4><a href="/Teradek/Bond+4+Pin+locking">Bond 4 Pin locking</a></h4>
<ul>
<li>Stream over up to 5 3G/4G/LTE connections - 4-Pin connections</li>
<li>Convert your Cube 600, 700, and 800 series into a 5-modem cellular bonding powerhouse</li>
<li>Stream over a combination of 5 3G/4G/LTE modems, Ethernet, and WiFi, allowing you to achieve higher bit rates and more bandwidth redundancy than with traditional streaming methods</li>
<li><a href="/Teradek/Bond+4+Pin+locking">More..</a></li>
</ul>
BIT-709
TER-BIT709
2-Pin Connector to 4 pin Hirose Cable
Teradek
<ul>
<li>2-Pin Connector to 4 pin Hirose Cable</li>
<li>Connect Sony F5 or F55 to Teradek Cube or Bolt</li>
<li>Length: 12" / 30cm</li>
</ul>
BIT-028
TER-BIT028
Antenna Array with protective case for Beam, Bolt 600, 1000, 2000 and 3000 receivers
Teradek
<ul>
<li>Panel Antenna Array</li>
<li>5GHz 3x16dBi 2x14 dBi Black with with a receiver mounting bracket</li>
<li>5GHz MIMO panel antenna designed for use with Beam and Bolt receivers</li>
<li>Offers a more resilient wireless transmission, especially in challenging RF conditions</li>
</ul>
<p>(it will not increase range)</p>
BIT-236
TER-BIT236
2-Pin Power to Flying Leads - Approx 90cm
Teradek
<ul>
<li>2-Pin Power to Flying Leads</li>
<li>BIT-218: Approx 45cm / 18"</li>
<li>BIT-236: Approx 90cm / 36"</li>
</ul>
Cube 705
TER-CUBE705
H.265 (HEVC) and H.264(AVC) Camera Top Encoder - Ethernet Only
Teradek
<h4>What is HEVC?</h4>
<p>HEVC, also known as H.265, is a next-generation compression standard that offers a number of enhancements over H.264. Compared to AVC (H.264) compression, HEVC is 50% more efficient, which translates into maintaining the same video quality at half the bitrate or double the video quality at the same bitrate.</p>
<h4>The new Cube 700 and Slice 756 series</h4>
<p>The new Cube 700 and Slice 756 series bring the latest in compression technology at a size and price point never before seen.</p>
<h4>What makes HEVC Cube and Slice unique</h4>
<ul>
<li>Can use both HEVC (H.265) and AVC (H.264) High Profile compression</li>
<li>Compatible with Core transcoding engine. This allows you to take advantage of HEVC encoding when streaming to Core, while delivering your content in AVC to your destination.</li>
<li>Dual input (HDMI + 3G-SDI)</li>
<li>Compatible with the new Bond expansion module, allowing you to turn your Cube 700 series into a professional bonding solution</li>
<li>GigE and 2.4 / 5Ghz 802.11ac WiFi built-in</li>
<li>Bitrate support up to 30Mbps</li>
<li>Streaming resolution support up to 1080p60</li>
<li>Compatible with T-21, Sencore, and Vitec HEVC decoders</li>
<li>Uses just 6W of power</li>
</ul>
<h4>What can Cube and Slice codecs do?</h4>
<ul>
<li>Stream to any online video platform, such as Facebook, Youtube, Twitch, Periscope, and more.</li>
<li>Stream point-to-point to decoders over the internet or on local networks with latency as low as 80ms</li>
<li>Comprehensive protocol support: MPEG-TS, RTSP, RTMP, HLS, TDS</li>
<li>Monitor your live video feed on an iOS device for confidence or local configuration</li>
<li>Turn your camera into a wireless video feed for Teradek’s Live:Air iOS switcher application</li>
</ul>
<ul>
<li>H.265 (HEVC) and H.264(AVC) Camera Top Encoder - Ethernet Only</li>
<li>Real-Time H.265(HEVC) and H.264(AVC) Encoder</li>
<li>Ethernet and USB Interfaces (No WiFi)</li>
<li>HDMI and SDI Video Inputs</li>
<li>Camera Top Form Factor</li>
<li>Built-In Color Grading</li>
<li>On-Board SD Card Recording</li>
<li>Two-Pin LEMO-Type Power Input</li>
</ul>
Link AB
TER-LINKAB
Dual Band WiFi Router - Gold Mount
Teradek
<p>Link is a ruggedized dual band WiFi router. Designed for use in broadcast and cinema applications, Link offers incredible range, several power options and a chassis suitable for regular abuse in the field and on set.</p>
<h4>Dual Band 2.4 / 5 GHz | 802.11ac WiFi</h4>
<p>Link supports the latest in WiFi standards and is backward compatible with 802.11 a/b/g/n.</p>
<h4>Long Range Coverage</h4>
<p>With 1000ft of range, Link offers enough WiFi coverage to blanket most medium sized venues.</p>
<h4>High Throughput and Interference Resistant</h4>
<p>Link’s quad core processor and significant internal memory ensure high data throughput despite numerous clients utilizing the network at once. Compared to typical consumer access points, Link offers optimized buffering and packet re-transmission, allowing you to maintain a consistent connection even in tough RF environments.</p>
<h4>Super Rugged and Flexible Mounting</h4>
<p>Link’s aluminum chassis allows it to withstand the daily abuse common in production environments or in the field. With several ¼”-20 mounts, the device can easily be mounted onto light stands, DIT carts, or OB vans.</p>
<h4>External Battery Connection</h4>
<p>Choose between a V-mount or 3-stud battery adapter to power Link for extended periods of time in the field.</p>
<h4>PoE Power</h4>
<p>Link’s passive PoE connection allows the system to be powered in line with the Teradek Sphere or any other PoE injector for a more streamlined setup on set.</p>
<h4>Network Security</h4>
<p>Link offers standard WiFi network protection, including WEP, WPA, and WPA2 security.</p>
<ul>
<li>Dual Band 2.4/5 GHz 802.11ac WiFi</li>
<li>1000ft range</li>
<li>High Throughput with Quad Core Processor</li>
<li>Rugged and Flexible Mounting Options (Gold Mount / V-Mount)</li>
<li>PoE Power</li>
</ul>
<ul>
<li>1 x Link with Gold Mount Battery Plate Chassis</li>
<li>4 x Antennas 2dBi WiFi 2.4/5.8 GHz</li>
<li>1 x Ethernet Cable</li>
<li>1 x 2-Pin Connector to P-Tap 6.5" Cable</li>
<li>1 x Lightstand Adapter 1/4-20inch</li>
<li>1 x 2-pin Conn to 30W AC Adapter (6ft Cable)</li>
</ul>
Link V
TER-LINKV
Dual Band WiFi Router - V-Mount
Teradek
<p>Link is a ruggedized dual band WiFi router. Designed for use in broadcast and cinema applications, Link offers incredible range, several power options and a chassis suitable for regular abuse in the field and on set.</p>
<h4>Dual Band 2.4 / 5 GHz | 802.11ac WiFi</h4>
<p>Link supports the latest in WiFi standards and is backward compatible with 802.11 a/b/g/n.</p>
<h4>Long Range Coverage</h4>
<p>With 1000ft of range, Link offers enough WiFi coverage to blanket most medium sized venues.</p>
<h4>High Throughput and Interference Resistant</h4>
<p>Link’s quad core processor and significant internal memory ensure high data throughput despite numerous clients utilizing the network at once. Compared to typical consumer access points, Link offers optimized buffering and packet re-transmission, allowing you to maintain a consistent connection even in tough RF environments.</p>
<h4>Super Rugged and Flexible Mounting</h4>
<p>Link’s aluminum chassis allows it to withstand the daily abuse common in production environments or in the field. With several ¼”-20 mounts, the device can easily be mounted onto light stands, DIT carts, or OB vans.</p>
<h4>External Battery Connection</h4>
<p>Choose between a V-mount or 3-stud battery adapter to power Link for extended periods of time in the field.</p>
<h4>PoE Power</h4>
<p>Link’s passive PoE connection allows the system to be powered in line with the Teradek Sphere or any other PoE injector for a more streamlined setup on set.</p>
<h4>Network Security</h4>
<p>Link offers standard WiFi network protection, including WEP, WPA, and WPA2 security.</p>
<ul>
<li>Dual Band 2.4/5 GHz 802.11ac WiFi</li>
<li>1000ft range</li>
<li>High Throughput with Quad Core Processor</li>
<li>Rugged and Flexible Mounting Options (Gold Mount / V-Mount)</li>
<li>PoE Power</li>
</ul>
<ul>
<li>1 x Link with Gold Mount Battery Plate Chassis</li>
<li>4 x Antennas 2dBi WiFi 2.4/5.8 GHz</li>
<li>1 x Ethernet Cable</li>
<li>1 x 2-Pin Connector to P-Tap 6.5" Cable</li>
<li>1 x Lightstand Adapter 1/4-20inch</li>
<li>1 x 2-pin Conn to 30W AC Adapter (6ft Cable)</li>
</ul>
Cube 625
TER-CUBE625
H.264 (AVC) Decoder SDI/HDMI GbE
Teradek
<p>Cube 625 is the latest in Teradek’s line of professional, scalable integrated decoders designed for video over IP delivery. Compatible with Cube encoders, Cube 625 offers SD/HD MPEG-4 AVC decoding for point-to-point video distribution, allowing content creators, broadcasters and system integrators to cost-effectively and reliably meet strict QoS requirements.</p>
<p>With flexible HDMI/3G-SDI dual-output and Ethernet/WiFi (2.4/5Ghz)/cellular USB connection options, Cube 625 streamlines IP video deployment in existing workflows and enhances infrastructure for all users. Small form factor and high-performance decoding make it one of the most versatile solutions for content delivery strategies in the video ecosystem.</p>
<ul>
<li>H.264(AVC) Decoder SDI/HDMI GbE</li>
<li>Ethernet and USB Interfaces (No WiFi)</li>
<li>HDMI and SDI Video Outputs (Outputs 1080p/30)</li>
<li>Camera Top Form Factor</li>
<li>Built-In Scaler</li>
<li>OLED Display</li>
<li>Powers by AC Adapter or 2-pin Connector Battery</li>
<li>Outfitted for 1/4" Mounting</li>
</ul>
Bond 759 GU
TER-BOND759GU
Bond HEVC/AVC Backpack + MPEG-TS - Gold Mount
Teradek
<h4>Next Level Mobile Broadcasting</h4>
<p>The Bond Backpack is an all in one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.</p>
<h4>High Gain Antennas</h4>
<p>Wireless reception for Teradek Node modems is greatly enhanced with two high gain antennas attached to the interior of the backpack.</p>
<h4>Gold or V Mount Battery Plate</h4>
<p>Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.</p>
<h4>Node Modems</h4>
<p>Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.</p>
<h4>Integrated Locking Cables</h4>
<p>To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.</p>
<h4>HEVC/AVC Bonding Codec</h4>
<p>At the heart of the Bond Backpack is the Cube encoder, a High Profile HEVC encoder that supports bitrates up to 30 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. H.264 only encoders are also available.</p>
<h4>Active Cooling</h4>
<p>To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.</p>
<h4>Ergonomic, Weather Resistant Design</h4>
<p>The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.</p>
<ul>
<li>Bond HEVC/AVC Backpack + MPEG-TS</li>
<li>All in one complete Bonding Solution</li>
<li>Real-Time HEVC/AVC (H.265/H.264) Encoder (Also available in just H.264 only. See Bond 659)</li>
<li>Network Bonding with LTE Modems and</li>
<li>High Gain Antennas</li>
<li>Gold or V Mount Battery Options (battery not included)</li>
<li>Integrated Locking Cables</li>
<li>Active Cooling keeps gear running optimally</li>
</ul>
<ul>
<li>1 x Backpack with Gold-Mount</li>
<li>1 x Cube 755 HEVC/AVC Encoder</li>
<li>2 x Antenna 2dBi Wifi 2.4/5.8GHz</li>
<li>1 x SDI BNC to BNC Cable</li>
<li>1 x Bond Expansion Module</li>
<li>1 x Quick Start Guide</li>
<li>8 x Antenna 2G/3G/4G Sma Mount</li>
<li>1 x 2-pin to PTap 6.5in Cable</li>
<li>1 x 4-pin Connector to 4pin Connector 34inch cable</li>
</ul>
Bond 759 VU
TER-BOND759VU
Bond HEVC/AVC Backpack + MPEG-TS - V-Mount
Teradek
<h4>Next Level Mobile Broadcasting</h4>
<p>The Bond Backpack is an all in one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.</p>
<h4>High Gain Antennas</h4>
<p>Wireless reception for Teradek Node modems is greatly enhanced with two high gain antennas attached to the interior of the backpack.</p>
<h4>Gold or V Mount Battery Plate</h4>
<p>Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.</p>
<h4>Node Modems</h4>
<p>Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.</p>
<h4>Integrated Locking Cables</h4>
<p>To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.</p>
<h4>HEVC/AVC Bonding Codec</h4>
<p>At the heart of the Bond Backpack is the Cube encoder, a High Profile HEVC encoder that supports bitrates up to 30 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. H.264 only encoders are also available.</p>
<h4>Active Cooling</h4>
<p>To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.</p>
<h4>Ergonomic, Weather Resistant Design</h4>
<p>The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.</p>
<ul>
<li>Bond HEVC/AVC Backpack + MPEG-TS</li>
<li>All in one complete Bonding Solution</li>
<li>Real-Time HEVC/AVC (H.265/H.264) Encoder (Also available in just H.264 only. See Bond 659)</li>
<li>Network Bonding with LTE Modems and</li>
<li>High Gain Antennas</li>
<li>Gold or V Mount Battery Options (battery not included)</li>
<li>Integrated Locking Cables</li>
<li>Active Cooling keeps gear running optimally</li>
</ul>
<ul>
<li>1 x Backpack with Gold-Mount</li>
<li>1 x Cube 755 HEVC/AVC Encoder</li>
<li>2 x Antenna 2dBi Wifi 2.4/5.8GHz</li>
<li>1 x SDI BNC to BNC Cable</li>
<li>1 x Bond Expansion Module</li>
<li>1 x Quick Start Guide</li>
<li>8 x Antenna 2G/3G/4G Sma Mount</li>
<li>1 x 2-pin to PTap 6.5in Cable</li>
<li>1 x 4-pin Connector to 4pin Connector 34inch cable</li>
</ul>
Bond 659 GU
TER-BOND659GU
Bond AVC Backpack + MPEG-TS - Gold Mount
Teradek
<h4>Next Level Mobile Broadcasting</h4>
<p>The Bond Backpack is an all in one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.</p>
<h4>High Gain Antennas</h4>
<p>Wireless reception for Teradek Node modems is greatly enhanced with two high gain antennas attached to the interior of the backpack.</p>
<h4>Gold or V Mount Battery Plate</h4>
<p>Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.</p>
<h4>Node Modems</h4>
<p>Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.</p>
<h4>Integrated Locking Cables</h4>
<p>To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.</p>
<h4>AVC Bonding Codec</h4>
<p>At the heart of the Bond Backpack is the Cube encoder, a High Profile AVC encoder that supports bitrates up to 15 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. HEVC encoders are also available. Please see Bond 759.</p>
<h4>Active Cooling</h4>
<p>To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.</p>
<h4>Ergonomic, Weather Resistant Design</h4>
<p>The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.</p>
<ul>
<li>Bond AVC Backpack + MPEG-TS</li>
<li>All in one complete Bonding Solution</li>
<li>Real-Time H.264 Encoder (Also available with HEVC/H.265 support. See <a href="/Teradek/Bond+759+GU">Bond 759</a>)</li>
<li>Network Bonding with LTE Modems and</li>
<li>High Gain Antennas</li>
<li>Gold or V Mount Battery Options (battery not included)</li>
<li>Integrated Locking Cables</li>
<li>Active Cooling keeps gear running optimally</li>
</ul>
<ul>
<li>1 x Backpack with Gold Mount</li>
<li>1 x Cube 655 AVC Encoder</li>
<li>2 x Antenna 2dBi Wifi 2.4/5.8GHz</li>
<li>1 x SDI BNC to BNC Cable</li>
<li>1 x Bond Expansion Module</li>
<li>1 x Quick Start Guide</li>
<li>8 x Antenna 2G/3G/4G Sma Mount</li>
<li>1 x 2-pin to PTap 6.5in Cable</li>
<li>1 x 4-pin Connector to 4pin Connector 34inch cable</li>
</ul>
Bond 659 VU
TER-BOND659VU
Bond AVC Backpack + MPEG-TS - V-Mount
Teradek
<h4>Next Level Mobile Broadcasting</h4>
<p>The Bond Backpack is an all in one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.</p>
<h4>High Gain Antennas</h4>
<p>Wireless reception for Teradek Node modems is greatly enhanced with two high gain antennas attached to the interior of the backpack.</p>
<h4>Gold or V Mount Battery Plate</h4>
<p>Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.</p>
<h4>Node Modems</h4>
<p>Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.</p>
<h4>Integrated Locking Cables</h4>
<p>To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.</p>
<h4>AVC Bonding Codec</h4>
<p>At the heart of the Bond Backpack is the Cube encoder, a High Profile AVC encoder that supports bitrates up to 15 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. HEVC encoders are also available. Please see Bond 759.</p>
<h4>Active Cooling</h4>
<p>To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.</p>
<h4>Ergonomic, Weather Resistant Design</h4>
<p>The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.</p>
<ul>
<li>Bond AVC Backpack + MPEG-TS</li>
<li>All in one complete Bonding Solution</li>
<li>Real-Time H.264 Encoder (Also available with HEVC/H.265 support. See <a href="/Teradek/Bond+759+GU">Bond 759</a>)</li>
<li>Network Bonding with LTE Modems and</li>
<li>High Gain Antennas</li>
<li>Gold or V Mount Battery Options (battery not included)</li>
<li>Integrated Locking Cables</li>
<li>Active Cooling keeps gear running optimally</li>
</ul>
<ul>
<li>1 x Backpack with Gold Mount</li>
<li>1 x Cube 655 AVC Encoder</li>
<li>2 x Antenna 2dBi Wifi 2.4/5.8GHz</li>
<li>1 x SDI BNC to BNC Cable</li>
<li>1 x Bond Expansion Module</li>
<li>1 x Quick Start Guide</li>
<li>8 x Antenna 2G/3G/4G Sma Mount</li>
<li>1 x 2-pin to PTap 6.5in Cable</li>
<li>1 x 4-pin Connector to 4pin Connector 34inch cable</li>
</ul>
Cube 675
TER-CUBE675
H.264 (AVC) Decoder SDI/HDMI GbE WiFi
Teradek
<p>Cube 675 is the latest in Teradek’s line of professional, scalable integrated decoders designed for video over IP delivery. Compatible with Cube encoders, Cube 675 offers SD/HD MPEG-4 AVC decoding for point-to-point video distribution, allowing content creators, broadcasters and system integrators to cost-effectively and reliably meet strict QoS requirements.</p>
<p>With flexible HDMI/3G-SDI dual-output and Ethernet/WiFi (2.4/5Ghz)/cellular USB connection options, Cube 675 streamlines IP video deployment in existing workflows and enhances infrastructure for all users. Small form factor and high-performance decoding make it one of the most versatile solutions for content delivery strategies in the video ecosystem.</p>
<ul>
<li>H.264 (AVC) Decoder SDI/HDMI GbE WiFi</li>
<li>Dual-Band 2.4/5.8 GHz WiFi, Ethernet and USB Interfaces</li>
<li>HDMI and SDI Video Outputs (Outputs 1080p/30)</li>
<li>Camera Top Form Factor</li>
<li>Built-In Scaler</li>
<li>OLED Display</li>
<li>Powers by AC Adapter or 2-pin Connector Battery</li>
<li>Outfitted for 1/4" Mounting</li>
</ul>
<ul>
<li>1 x 2-pin Connector to 18W AC Power Adapter</li>
<li>1 x Ethernet Cable</li>
<li>1 x SDI Cable (BNC to BNC)</li>
<li>1 x HDMI Cable (Full Type A to Full Type A)</li>
<li>1 x 1-Year Warranty</li>
<li>2 x Wireless Antennas (2dBi 2.4/5.8 Ghz)</li>
</ul>
BIT-054
TER-BIT054
PSU for Bond | Link | Bond II
Teradek
<ul>
<li>2-pin Connector to 30 Watt AC Adapter PSU for Bond, Link and Bond II</li>
<li>6ft Cable</li>
</ul>
BIT-085
TER-BIT085
Cat5e to RED DSMC Cable
Teradek
<ul>
<li>Cat5e Ethernet RJ45 connector to RED DSMC 9-pin connector Cable</li>
<li>Passes data for RED camera control via the Teradek COLR</li>
<li>Length: 46cm / 18"</li>
</ul>
BIT-087
TER-BIT087
ARRI 10 Pin Connector to Cat5E Cable
Teradek
<ul>
<li>ARRI 10 Pin Connector to Cat5E Cable</li>
<li>Length: 45cm / 18"</li>
</ul>
BIT-752
TER-BIT752
Canon BP-970 7.2V Battery Adapter Plate
Teradek
<ul>
<li>Canon BP-970 7.2V Battery Adapter Plate</li>
<li>Fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with camera BP-970 batteries</li>
</ul>
BIT-753
TER-BIT753
JVC BN-V483U 7.2V Battery Adapter Plate
Teradek
<ul>
<li>JVC BN-V483U 7.2V Battery Adapter Plate</li>
<li>Use one of these compact battery plates to power the Bolt Sidekick via a small battery.</li>
</ul>
BIT-754
TER-BIT754
Panasonic CGA-D54 7.2V Battery Adapter Plate
Teradek
<ul>
<li>Panasonic CGA-D54 7.2V Battery Adapter Plate</li>
<li>Use one of these compact battery plates to power the Bolt Sidekick via a small battery.</li>
</ul>
BIT-755
TER-BIT755
Panasonic VW-VBG6 7.2V Battery Adapter Plate
Teradek
<ul>
<li>Panasonic VW-VBG6 7.2V Battery Adapter Plate</li>
<li>Use one of these compact battery plates to power the Bolt Sidekick via a small battery.</li>
</ul>
BIT-756
TER-BIT756
Sony M Series 7.2V Battery Adapter Plate
Teradek
<ul>
<li>Sony M Series 7.2V Battery Adapter Plate</li>
<li>Fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with camera Sony M Series batteries</li>
</ul>
BIT-758
TER-BIT758
Sony B Series 7.2V Battery Adapter Plate
Teradek
<ul>
<li>Sony B Series 7.2V Battery Adapter Plate</li>
<li>Fits snugly on any Bolt Transmitter, Receiver, Cube 600, Cube 655 or COLR to charge/power with camera Sony B Series batteries</li>
</ul>
BIT-760
TER-BIT760
Dual V-Mount Battery Plate for Bolt Transmitter
Teradek
<ul>
<li>Securely fasten your Bolt Transmitters between Battery Plates</li>
<li>Power pass-through plates</li>
<li>Three 1/4 20" Mounting points</li>
<li>Two 1/4 20" Pass-through slots</li>
<li>D-Tap Output</li>
</ul>
BIT-761
TER-BIT761
Dual Gold Mount Battery Plate for Bolt Transmitter
Teradek
<ul>
<li>Securely fasten your Bolt Receivers between Battery Plates</li>
<li>Allows for seamless power solution for Monitor and Bolt Receiver combinations</li>
<li>Power pass-through plates</li>
<li>Three 1/4 20" Mounting points</li>
<li>Two 1/4 20" Pass-through slots</li>
<li>D-Tap Output to power Teradek Bolt Receiver</li>
</ul>
BIT-776
TER-BIT776
Sidekick Mounting Bracket
Teradek
<ul>
<li>A custom mounting bracket for the Teradek Bolt Sidekick</li>
<li>Two 4-40 screws for mounting the Ace unit to the bracket</li>
<li>Provides several 1/4"x 20 screw holes for easy mounting options</li>
</ul>
<ul>
<li>1 x Sidekick mounting bracket</li>
<li>2 x 4-40 screws for attaching to transmitter</li>
<li>2 x 1/4"-20 mounting screws to mount bracket to camera/monitor cage</li>
<li>1 x 3/32" Allen Wrench</li>
</ul>
BIT-0009
TER-BIT0009
Antenna Cap for 3rd Generation Bolt RX
Teradek
<ul>
<li>Antenna Cap for 3rd Generation Bolt RX</li>
</ul>
MK3.1
TRT-15-0030
3-Channel Motor Driver Receiver
Teradek
<p>The MK 3.1 is the world’s lightest and smallest motor driver receiver, allowing it to be easily mounted to any industry standard camera.</p>
<p>It supports up to 3 motors for FI+Z control (Focus, Iris, and Zoom) and includes an auxiliary port for 2 analog inputs, trigger, and digital serial communication. The system receives commands from any Teradek RT 4-Axis or 6-Axis Controller at up to 1.5Km (~5000ft) away and includes automatic or manual (softstop) calibration with a proprietary algorithm for torque control and lens protection.</p>
<ul>
<li>The MK 3.1 is the world’s lightest and smallest motor driver receiver, allowing it to be easily mounted to any industry standard camera.</li>
<li>Supports up to 3 motors for Focus, Iris, and Zoom control</li>
<li>Wireless reception up to 5000 ft.</li>
<li>2 Auxiliary ports for trigger and/or serial communication</li>
<li>Run/stop control for industry standard cameras</li>
<li>Automatic/manual calibration with proprietary torque control and lens protection algorithm</li>
</ul>
Latitude Sidekick
TRT-15-0012
3-Channel Motor Driver Receiver | RED Camera Control
Teradek
<p>The Latitude Sidekick motor driver receiver is designed to fit seamlessly onto the side of any RED DSMC2 camera.</p>
<p>It supports up to 3 motors for FI+Z control (Focus, Iris, and/or Zoom) and can control run/stop on DSMC2 cameras. The system receives commands from any Teradek RT 4-Axis or 6-Axis Controller at up to 5000ft (1.5km) away and includes automatic or manual (softstop) calibration with a proprietary algorithm for torque control and lens protection.</p>
<p>When attached to RED DSMC2 cameras, the Latitude Sidekick allows users to control EF/AF lens focus/iris with their own internal motors, in addition to camera shutter, ISO, run/stop and button features (2x magnification, edge, focus assist).</p>
<ul>
<li>The Latitude Sidekick motor driver receiver fits seamlessly onto the side of any RED DSMC2 camera.</li>
<li>Supports up to 3 motors for Focus, Iris, and Zoom control</li>
<li>Wireless reception up to 5000 ft.</li>
<li>Controls run/stop, shutter, ISO, and other RED DSMC2 camera parameters</li>
<li>Controls Canon EF / Nikon AF lenses using internal motors</li>
<li>Automatic/manual calibration with proprietary algorithm for torque control</li>
<li>Red Approved</li>
</ul>
Latitude-M
TRT-15-0008
2-Channel Motor Driver Receiver | RED Camera Control
Teradek
<p>The Latitude-M supports up to 2 motors for FI+Z control (Focus, Iris, and/or Zoom) and includes run/stop support for all industry standard cameras.</p>
<p>The system receives commands from any Teradek RT 4-Axis or 6-Axis Controller at up to 5000ft (1.5km) away and includes automatic or manual (softstop) calibration with a proprietary algorithm for torque control and lens protection.</p>
<ul>
<li>Perfect for gimbals and shooting on the go, the Latitude M is an ultralight receiver designed to keep weight off your rig.</li>
<li>Supports up to 2 motors for Focus and Iris control</li>
<li>Wireless reception up to 5000 ft.</li>
<li>Controls run/stop, shutter, ISO, and other RED DSMC2 camera parameters</li>
<li>Controls Canon EF / Nikon AF lenses using internal motors</li>
<li>Automatic/manual calibration with proprietary algorithm for torque control</li>
<li>2.4GHz WiFi for Foolcontrol</li>
<li>Red Approved</li>
</ul>
Latitude-MB
TRT-15-0009
2-Channel Motor Driver Receiver | RED Camera Control
Teradek
<p>The Latitude-MB is identical to the Latitude-M, but includes a different backplate that allows you to power the receiver with an LP-E6 battery.</p>
<p>Battery power makes the Latitude-MB great for super lightweight setups that can run motors at a slightly reduced speed and torque.</p>
<ul>
<li>Identical to the Latitude M, the Latitude MB receiver adds an LP-E6 battery plate.</li>
<li>Supports up to 2 motors for Focus and Iris control</li>
<li>Wireless reception up to 5000 ft.</li>
<li>Controls run/stop, shutter, ISO, and other RED DSMC2 camera parameters</li>
<li>Controls Canon EF / Nikon AF lenses using internal motors</li>
<li>Automatic/manual calibration with proprietary algorithm for torque control</li>
<li>2.4GHz WiFi for Foolcontrol</li>
<li>Red Approved</li>
</ul>
MK3.1 Brushless Motor
TRT-15-0025
Brushless Motor works with any Teradek RT MK 3.1 or Latitude lens control system
Teradek
<p>The MK.3.1 Brushless Motor is a revolution in wireless lens control, offering superior response, smoother operation and 4 times the service life of brushed motors.</p>
<p>The motor never cogs, sparks, or skips and operates nearly silently, even at high speeds.</p>
<p>The MK3.1 Brushless Motor works with any Teradek MK3.1 or Latitude Lens Control System.</p>
<ul>
<li>The MK.3.1 Brushless Motor is a revolution in wireless lens control, offering superior response, smoother operation, and 4 times the service life of brushed motors. The motor never cogs, sparks, or skips and operates nearly silently, even at high speeds</li>
<li>Works with any Teradek RT MK 3.1 or Latitude lens control system.</li>
<li>Drive gear can be mounted on either side</li>
<li>Full range of gears available</li>
<li>Adjustable motor response for smooth to sharp moves</li>
<li>2.2 Nm maximum allowable torque</li>
<li>Support for 15mm/19mm rods with good height adjustment</li>
<li>Compact chassis design with super thin and flexible cables</li>
</ul>
MK3.1 4-Axis
TRT-15-0001
4-Axis Wireless Lens Controller
Teradek
<p>The 4-Axis Controller gives you extraordinarily precise control over your lens with 4 mappable axes (knob, slider, 2x wheels) and a rugged chassis that fits comfortably in your hands.</p>
<p>Its FHSS wireless system effectively cuts through the toughest interference and transmits latency-free commands over the 2.4GHz band at up to nearly 5000ft (1.5km).</p>
<p>Mounted at the top of the controller is an OLED screen with intuitive menu system for calibration and reference, while the back of the controller features a removable Canon LP-E6 battery, which offers up to 36 hours of continuous runtime.</p>
<ul>
<li>The 4-Axis Controller gives you extraordinarily precise control over your lens.</li>
<li>4 mappable axes: knob, slider, wheel A, wheel B</li>
<li>2.4GHz FHSS wireless system transmits latency-free commands up to 5000 ft.</li>
<li>Built-in OLED with intuitive menu system</li>
<li>Removable Canon LP-E6 battery that offers up to 36 hours of continuous runtime</li>
</ul>
MK3.1 6-Axis
TRT-15-0002
6-Axis Wireless Lens Controller with Forcezoom Joystick
Teradek
<p>The 6-Axis Controller gives you extraordinarily precise control over your lenses with 6 mappable axes (knob, slider, 2x wheels, and Forcezoom X + Y) and a rugged chassis that fits comfortably in your hands.</p>
<p>Its FHSS wireless system effectively cuts through the toughest interference and transmits latency-free commands over the 2.4GHz band at up to nearly 5000ft (1.5km).</p>
<p>Mounted at the top of the controller is an OLED screen with intuitive menu system for calibration and reference, while the back of the controller features a removable Canon LP-E6 battery, which offers up to 36 hours of continuous runtime. What sets the 6-Axis Controller apart from the 4-Axis is the inclusion of a Forcezoom joystick, which is used for controlling lens zoom with perfect accuracy.</p>
<ul>
<li>The 6-Axis Controller gives you extraordinarily precise control over your lens.</li>
<li>6 mappable axes: knob, slider, wheel A, wheel B</li>
<li>2.4GHz FHSS wireless system transmits latency-free commands up to 5000 ft.</li>
<li>Built-in OLED with intuitive menu system</li>
<li>Removable Canon LP-E6 battery that offers up to 36 hours of continuous runtime</li>
<li>Forcezoom joystick, which is used for controlling lens zoom with perfect accuracy</li>
</ul>
Smartknob
TRT-15-0039
Wired Lens Controller | RED Camera Control
Teradek
<p>The Smartknob is a standalone (no receiver required) wired lens controller for Canon EF and Nikon AF lenses attached to RED DSMC and DSMC2 cameras.</p>
<p>Control EF/AF lenses using their internal motors with incredible precision and map RED camera commands to several built-in hot keys located along the side of the knob.</p>
<p>The Smartknob is ergonomic and outperforms the control characteristics of standard manual follow focuses.<br />With the addition of any Teradek Latitude motor receiver, the Smartknob can be used to control Teradek brushless motors for cinema level accuracy.</p>
<ul>
<li>The Smartknob is a standalone (no receiver required) wired lens controller for Canon EF and Nikon AF lenses attached to RED DSMC and DSMC2 cameras.</li>
<li>Control EF/AF lenses using their internal motors with incredible precision</li>
<li>Map RED camera commands to several built-in hot keys located along the side of the knob</li>
<li>Ergonomic design that outperforms the control characteristics of standard manual follow focuses</li>
<li>Can control Teradek RT brushless motors for cinema level accuracy</li>
</ul>
<ul>
<li>1 x Smartknob White Disc</li>
<li>1 x USB Cable for firmware updating</li>
<li>1 x Power/Control DTAP Cable</li>
</ul>
Wired Thumbwheel-S
TRT-15-0041
Controller (Right Hand) with Run/Stop Control
Teradek
<p>Control Focus/Iris on Canon EF Lenses via Internal Motors on RED Cameras Control Teradek Brushless lens motors Use up to two Thumbwheels Simultaneously Configure to any axis Right-Hand Model.</p>
<ul>
<li>Control focus / iris on Canon EF Lenses with RED cameras</li>
<li>Control Teradek Brushless lens motors</li>
<li>Use up to two Thumbwheels simultaneously</li>
<li>Configure to any axis</li>
<li>Control run / stop</li>
</ul>
<ul>
<li>1 x Thumbwheel</li>
<li>1 x Rubber grip insert</li>
<li>1 x Extra long bolt for wide grip</li>
</ul>
Wired Thumbwheel-X
TRT-15-0040
Controller (Left Hand) with Run/Stop Control
Teradek
<p>Control Focus/Iris on Canon EF Lenses via Internal Motors on RED Cameras Control Teradek Brushless lens motors Use up to two Thumbwheels simultaneously Configure to any axis Left-Hand Model.</p>
<ul>
<li>Control focus / iris on Canon EF Lenses with RED cameras</li>
<li>Control Teradek Brushless lens motors</li>
<li>Use up to two Thumbwheels simultaneously</li>
<li>Configure to any axis</li>
<li>Control run / stop</li>
</ul>
<ul>
<li>1 x Thumbwheel</li>
<li>1 x Rubber grip insert</li>
<li>1 x Extra long bolt for wide grip</li>
</ul>
MK3.1 Motor Bracket for 15 | 19mm Rods
TRT-11-1434
MK3.1 Motor Bracket - For 19mm and 15mm rods
Teradek
<ul>
<li>MK3.1 Motor Bracket</li>
<li>For 19mm and 15mm rods</li>
<li>Replacement/spare bracket for the Motor MK3 and MK3.1. Fits 19mm and 15mm rods, using the included adapter bushing</li>
</ul>
MK3.1 D-Tap Power Cable
TRT-11-1368
D-Tap Power Cable For MK3.1 Receiver
Teradek
<ul>
<li>Power the RTMotion from a battery or plate</li>
<li>Hirose to D-Tap (male) 60cm Length</li>
</ul>
Motor Gear Set - 0.4 | 0.5 | 0.6 | 0.8 Wide
TRT-11-1435
Motor Gear Full Set - Pack of 4, 0.8-wide, 0.6, 0.5, 0.4
Teradek
<ul>
<li>Motor Gear Full Set</li>
<li>Pack of 4, 0.8-wide, 0.6, 0.5, 0.4</li>
<li>0.8mod WIDE (12mm) - Cine, ARRI, Zeiss, 32pitch, Sony etc</li>
<li>0.6mod - Fujinon</li>
<li>0.5mod - Canon, Angenieux</li>
<li>0.4mod - Panavision, Canon, etc</li>
</ul>
0.8mod Motor Gear - Cine | ARRI | Zeiss | 32pitch | Sony etc
TRT-11-1423
Motor Gear 0.8 for use with Cine, ARRI, Zeiss, 32pitch, Sony, etc
Teradek
<ul>
<li>0.8mod Motor Gear</li>
<li>For use with Cine, ARRI, Zeiss, 32pitch, Sony etc</li>
<li>Precision CNC hobbed gear for any MK3.0 and MK3.1 Motor</li>
</ul>
0.6mod Motor Gear - Fujinon
TRT-11-1422
Motor Gear 0.6 for use with Fujinon
Teradek
<ul>
<li>0.6mod Motor Gear</li>
<li>Fujinon</li>
<li>Precision CNC hobbed gear for MK3.0 and MK3.1 Motor</li>
</ul>
0.5mod Motor Gear - Canon, Angenieux
TRT-11-1421
Motor Gear 0.5 for use with Canon and Angenieux ENG
Teradek
<ul>
<li>0.5mod Motor Gear</li>
<li>Canon, Angenieux</li>
<li>Precision CNC hobbed gear for MK3.0 and MK3.1 Motor</li>
</ul>
0.4mod Motor Gear - Panavision, Canon
TRT-11-1420
Motor Gear 0.4 for use with Panavision, Canon C-Mount
Teradek
<ul>
<li>0.4mod Motor Gear</li>
<li>Panavision, Canon, etc</li>
<li>Precision CNC hobbed gear for MK3.0 and MK3.1 Motor</li>
</ul>
MK3.1 RED DSMC2 Camera Cable
TRT-11-1396
RED DSMC2 Camera Cable - For MK3.1 Receiver
Teradek
<ul>
<li>RED DSMC2 Camera Cable - For MK3.1 Receiver</li>
<li>Use to trigger run/stop function with the RED EPIC DSMC2.</li>
</ul>
<p><strong>IMPORTANT</strong><br />If you are using the 'RED DSMC2 Base Expander' - this module works on the older RED trigger protocol and you will need a our MK3.1 DSMC cable to control runstop. With all other DSMC2 RED I/O modules, you will need this MK3.1 DSMC2 cable. Hirose to LM.00B 60cm Length Connect directly to the RED DSMC2's SYNC port</p>
0.8mod Motor Gear Wide - Double Thick 12mm
TRT-11-1424
Motor Gear 0.8 Wide for use with Cine, ARRI, Zeiss, 32pitch, Sony - 12mm Wide
Teradek
<ul>
<li>0.8mod Motor Gear Wide</li>
<li>Double Thick 12mm</li>
<li>Precision CNC hobbed wide gear for MK3.0 and MK3.1 Motor</li>
</ul>
MK3.1 RED EPIC (BNC Version) and Phantom R | S
TRT-11-1397
RED EPIC (BNC Version) and Phantom R | S - For MK3.1 Receiver
Teradek
<ul>
<li>RED EPIC (BNC Version) and Phantom R/S - For MK3.1 Receiver</li>
<li>Use to trigger the run/stop function on the RED EPIC Camera</li>
<li>Hirose to BNC Connector 60cm Length</li>
<li>For use with RED 3BNC-TO-00 SYNC CABLE</li>
<li>Also works on PHANTOM cameras with a BNC R/S connector</li>
</ul>
Marking Disc - MK3.1 Controller
TRT-11-1441
White Marking Disc for MK3.1 Controller
Teradek
<ul>
<li>White Marking Disc</li>
<li>Designed for MK3.1 Controller</li>
<li>Use a China Marker to clearly mark the disc (NOTE: Permanent marker pens can also be used and cleaned with isopropyl alcohol)</li>
</ul>
MK3.1 RED EPIC DSMC
TRT-11-1398
RED EPIC DSMC - For MK3.1 Receiver
Teradek
<ul>
<li>RED EPIC DSMC - For MK3.1 Receiver</li>
<li>Use to trigger run/stop function with the RED EPIC DSMC</li>
</ul>
<p><strong>IMPORTANT</strong><br />This cable will work for all RED EPIC DSMC cameras/modules. If you are using a DSMC2 with the 'RED DSMC2 Base Expander' - this module uses the older RED trigger protocol and you will need this MK3.1 DSMC cable to control runstop. With all other DSMC2 RED I/O modules, you will need this MK3.1 DSMC2 cable. Hirose to LM.00B 60cm Length Connect directly to the RED EPIC's SYNC port</p>
Marking Disc x8 - MK3.1 Controller
TRT-11-1441-1
White Marking Disc for MK3.1 Controller - Set of 8
Teradek
<ul>
<li>White Marking Disc</li>
<li>Designed for MK3.1 Controller</li>
<li>The MK3.1 System Case is designed to perfectly fit 8 white discs</li>
<li>Use a China Marker to clearly mark the disc (NOTE: Permanent marker pens can also be used and cleaned with isopropyl alcohol)</li>
</ul>
Marking Disc - Smartknob
TRT-11-1429
Conical White Marking Disc for Smartknob / Smartknob RF
Teradek
<ul>
<li>White marking disc for the Smartknob and Smartknob RF</li>
<li>Use a China Marker to clearly mark the disc (NOTE: Permanent marker pens can also be used and cleaned with isopropyl alcohol)</li>
</ul>
MK3.1 Camera Control | Power Cable - Sony F5 | F55
TRT-11-1409
MK3.1 Camera Control / Power Cable - Sony F5/F55 (60cm)
Teradek
<ul>
<li>Use to the trigger run/stop function on the SONY F5 and F55 cameras</li>
<li>Hirose Connector (on both ends) 60cm Length Trigger compatible cameras via the 12V Hirose port on the battery plate Power and R/S</li>
</ul>
<p><strong>NOTE:</strong><br />On all systems purchased after July 2013, this cable can also power the RTMotion. Attach to the POWER socket, instead of the CAM socket.</p>
MK3.1 Camera Control Cable - RED ONE
TRT-11-1400
RED ONE Aux 4-pin R/S - For MK3.1 Receiver
Teradek
<ul>
<li>RED ONE Aux 4-pin R/S - For MK3.1 Receiver</li>
<li>Use to the trigger run/stop function on the RED ONE Camera. Hirose to LM 60cm Length R/S only (no power)</li>
</ul>
MK3.1 Power Cable RED MODULE | ARRI Alexa (60cm)
TRT-11-1399
MK3.1 RED Module + ARRI ALEXA - For MK3.1 Receiver
Teradek
<ul>
<li>MK3.1 RED Module + ARRI ALEXA - For MK3.1 Receiver</li>
<li>Power the RTMotion MK3.1 Receiver from the 12V port on the REDVOLT XL module, RED BACKPACK QUICKPLATE or ARRI Alexa</li>
<li>Hirose to LM 0B - 60cm Length Compatible with; - ARRI Alexa - output is 12V, 2.2 A - RED BACKPACK QUICKPLATE - output is 12V, 3.8 A</li>
<li>REDVOLT XL Module - output is 12V, 3.8 A</li>
</ul>
Receiver Bracket - for MDR-MB
TRT-11-1433
Latitude-MB Receiver Bracket with 1/4-20 thread
Teradek
<ul>
<li>MDR-MB Receiver Bracket</li>
<li>Designed for MDR-MB (Includes screws)</li>
<li>Can be fixed to the MDR-MB to give two mounting points as well as a 1/4-20" thread</li>
</ul>
DSMC2 Cheeseplate - For MDR-SK | DSMC2
TRT-11-1425
Cheeseplate for DSMC2 / Latitude-SK
Teradek
<ul>
<li>Cheeseplate for DSMC2 / Latitude-SK</li>
<li>Fit directly onto the RED DSMC2 body's Sidekick slot</li>
<li>Fit directly onto the MDR-SK DSMC2 module</li>
</ul>
MK3.1 Camera Control Cable - LANC (60cm)
TRT-11-1366
MK3.1 Canon, Blackmagic, Sony LANC R/S - For MK3.1 Receiver
Teradek
<ul>
<li>MK3.1 Canon, Blackmagic, Sony LANC R/S - For MK3.1 Receiver</li>
<li>Use to trigger Record/Stop on Canon, Blackmagic and Sony cameras featuring a LANC (remote) socket</li>
<li>Works with: Sony FS7, FS700, Blackmagic, Canon C100/300/500, etc.</li>
<li>ALSO: Will trigger run/stop on a Panasonic GH4</li>
<li>In the menu, set the CAMERA to ARRI. Hirose to 2.5mm miniplug Connector, 60cm Length</li>
</ul>
Receiver Rail Clamp for 15mm | 19mm Rods
TRT-11-1439
Receiver Rail Clamp for 15/19mm rods, fits 1/4-20
Teradek
<ul>
<li>Receiver Rail Clamp</li>
<li>Designed for 15mm and 19mm rods</li>
<li>Attach the Receiver to 19 or 15mm rods via one of the Receiver's 1/4-20 mounting threads.</li>
</ul>
Latitude Camera Control Cable - LANC
TRT-11-1376
LATITUDE LANC Run/Stop cable - For Latitude MDR
Teradek
<ul>
<li>LATITUDE LANC Run/Stop cable - For Latitude MDR</li>
<li>Trigger the RUN/STOP function on LANC equipped cameras, such as; Sony (FS-700, FS7, etc.), Canon (C300, etc.) and BlackMagic</li>
<li>40cm length</li>
</ul>
System Case MK3.1 - For up to 3 Motors
TRT-11-1416
Custom Case for Teradek RT Wireless Lens Control - holds up to 3x motors
Teradek
<ul>
<li>System Case MK3.1</li>
<li>Holds up to 3 Motors</li>
<li>Transport your whole kit safely with the Explorer case</li>
<li>Includes custom cut foam insert for up to 3 motor FIZ setup</li>
<li>Motors and Receiver can be stored with brackets on</li>
<li>Dedicated space for 8 white discs, cables and accessories such as a Thumbwheel</li>
<li>Dustproof, Waterproof with pressure valve</li>
</ul>
LATITUDE ARRI Run | Stop cable - For Latitude MDR
TRT-11-1375
Latitude Camera Control Cable - ARRI (40cm, Fischer 103.2)
Teradek
<ul>
<li>Latitude Camera Control Cable - ARRI (40cm, Fischer 103.2)</li>
<li>Trigger the RUN/STOP function on ARRI cameras equipped with an RS port</li>
<li>40cm length</li>
</ul>
Controller Neck Strap
TRT-11-1443
Neck Strap For Wireless Controllers
Teradek
<ul>
<li>Controller Neck Strap</li>
<li>Designed for Wireless Controllers</li>
<li>Attach the strap to your Controller for safe use.</li>
<li>Designed for multi way use, can be lengthened or shortened for use around the neck or across the body depending on how you like to wear it</li>
</ul>
LATITUDE Sony F55 Run | Stop cable - For Latitude MDR
TRT-11-1385
Latitude Camera Control Cable - Sony F55 (40cm, HR10A 4pin)
Teradek
<ul>
<li>Latitude Camera Control Cable - Sony F55 (40cm, HR10A 4pin)</li>
<li>Trigger the RUN/STOP function on the Sony F5/ F55</li>
<li>40cm length</li>
</ul>
Wired-Mode Cable 500cm - 5pin for MK3.1
TRT-11-1414
Wired-Mode Cable 500cm - For MK3.1 Receiver & Latitude MDR
Teradek
<ul>
<li>Wired-Mode Cable 500cm</li>
<li>Designed for MK3.1 Receiver & Latitude MDR</li>
<li>Connect the CONTROLLER to the RECEIVER to bypass the wireless link. LM Connectors (on both ends)</li>
<li>5m Length</li>
</ul>
Wired-Mode Cable 200cm - 5pin for MK3.1
TRT-11-1413
Wired-Mode Cable 200cm - For MK3.1 Receiver & Latitude MDR
Teradek
<ul>
<li>Wired-Mode Cable 200cm</li>
<li>Designed for MK3.1 Receiver & Latitude MDR</li>
<li>Connect the CONTROLLER to the RECEIVER to bypass the wireless link. LM Connectors (on both ends)</li>
<li>2m Length</li>
</ul>
LATITUDE RED-CTRL Cable 40cm - For Latitude MDR
TRT-11-1384
Latitude Camera Control Cable - RED DSMC2 (40cm)
Teradek
<ul>
<li>Latitude Camera Control Cable - RED DSMC2 (40cm)</li>
<li>Connect the LATITUDE to RED cameras equipped with a CTRL socket</li>
<li>Enables run/stop, control of EF lenses and more</li>
<li>40cm length</li>
</ul>
Wired-Mode Cable 120cm - 5pin for MK3.1
TRT-11-1412
Wired-Mode Cable 120cm - For MK3.1 Receiver & Latitude MDR
Teradek
<ul>
<li>Wired-Mode Cable 120cm</li>
<li>Designed for MK3.1 Receiver & Latitude MDR</li>
<li>Connect the CONTROLLER to the RECEIVER to bypass the wireless link. LM Connectors (on both ends)</li>
<li>1.2m Length</li>
</ul>
MK3.1 Dual Slave Cable - 100cm
TRT-11-1371
MK3.1 Dual Slave Controller Cable 1m - For MK3.1 Receiver
Teradek
<ul>
<li>MK3.1 Dual Slave Controller Cable 1m</li>
<li>Designed for MK3.1 Receiver</li>
<li>Connect 2 Slave Controllers to the AUX port in the MK3.1 Receiver. LM Connectors 100cm Length</li>
</ul>
LATITUDE Power Cable, DTAP RA - For Latitude MDR
TRT-11-1378
Power Cable DTAP (40cm, r/a to straight)
Teradek
<ul>
<li>Power Cable DTAP (40cm, r/a to straight)</li>
<li>This cable has a right-angled LM connector and colour coded overmold allowing for an easy compact setup</li>
<li>40cm length</li>
</ul>
Slave Controller Cable 60cm (r|a to straight)
TRT-11-1404
Slave Controller Cable 60cm (RA) - For MK3.1 Receiver & Latitude MDR
Teradek
<ul>
<li>Slave Controller Cable 60cm (RA)</li>
<li>Designed for MK3.1 Receiver & Latitude MDR</li>
<li>Connect any Slave Controller to the AUX port in the MK3.1 Receiver or into a Latitude. LM Connectors (one right angle)</li>
<li>60cm Length</li>
</ul>
LATITUDE Power Cable, XLR 4-pin RA - For Latitude MDR
TRT-11-1382
Latitude Power Cable 4-pin XLR (40cm, r/a to straight)
Teradek
<ul>
<li>Latitude Power Cable 4-pin XLR (40cm, r/a to straight)</li>
<li>Power the LATITUDE from an XLR-4pin. 1=GND, 4=Voltage</li>
<li>Cable Length 40cm. This cable has a right-angled LM connector and colour coded overmold allowing for an easy compact setup.</li>
</ul>
LATITUDE Power Cable, 0B 2p (Crossover) RA - For Latitude MDR
TRT-11-1377
Latitude Power Cable 2pin (Crossover) (40cm, r/a to straight)
Teradek
<ul>
<li>Latitude Power Cable 2pin (Crossover) (40cm, r/a to straight)</li>
<li>Power the LATITUDE from 2pin LM.0B, US type (Pin2=GND)</li>
<li>This cable is wired 1-2, 2-1, to allow the LATITUDE (Pin1=GND) to power off USA style 2pin LM power source (Pin2=GND)</li>
</ul>
<p><strong>NOTE:</strong><br />This will NOT work on an ARRI, RED, etc., which use the "European" standard of Pin1=Gnd <br />To be clear, this is REVERSING the pins, to allow the LATITUDE (Pin#1=GND) to power off a supply where Pin#2=GND. Compatible with:- - Letux Helix 2pin power outputs 40cm cable length. This cable has a right-angled LM.0B connector and colour coded overmold allowing for an easy compact setup.</p>
Latitude Camera Control Cable - RED DSMC2 (25cm)
TRT-11-1383
Latitude RED-CTRL Cable 25cm - For Latitude MDR
Teradek
<ul>
<li>LATITUDE RED-CTRL Cable 25cm</li>
<li>Designed for Latitude MDR</li>
<li>Connect the LATITUDE to RED cameras equipped with a CTRL socket.</li>
<li>Enables run/stop, control of EF lenses and more.</li>
<li>25cm length</li>
</ul>
LATITUDE Power Cable, LM.0B 2p RA - For Latitude MDR
TRT-11-1379
Latitude Power Cable 2pin (40cm, r/a to straight)
Teradek
<ul>
<li>Latitude Power Cable 2pin (40cm, r/a to straight)</li>
<li>Power the LATITUDE from 2pin LM.0B, EU type (Pin1=GND) as used by ARRI, RED, etc.</li>
<li>Will power the LATITUDE from an ALEXA (12V) and RED (AUX 2-pin)</li>
<li>Cable Length 40cm</li>
<li>This cable has a right-angled LM connector and colour coded overmold allowing for an easy compact setup</li>
<li>Cable is wired 1-1, 2-2... So it assumes that the power supply Pin #1 = GND</li>
</ul>
MK3.1 Camera Control Cable - ARRI (60cm)
TRT-11-1357
MK3.1 ARRI R/S - For MK3.1 Receiver
Teradek
<ul>
<li>MK3.1 ARRI R/S</li>
<li>Designed for MK3.1 Receiver</li>
<li>Use to trigger the run/stop function on ARRI Cameras with RS port. Hirose to Fischer 60cm Length To R/S on an ALEXA MINI you will need this cable, and the following adapter; ARRI K2.0006170 (K20006170) EXT-RS Adapter for Alexa Mini</li>
</ul>
LATITUDE Power Cable, RED AUX 4p RA - For Latitude MDR
TRT-11-1381
Latitude Power Cable RED AUX (40cm, r/a to straight)
Teradek
<ul>
<li>Latitude Power Cable RED AUX (40cm, r/a to straight)</li>
<li>Power the LATITUDE from the 4pin AUX on RED cameras</li>
<li>Cable Length 40cm</li>
<li>This cable has a right-angled LM connector and colour coded overmold allowing for an easy compact setup</li>
</ul>
Latitude Dual Motor Cable 37cm - For Latitude MDR
TRT-11-1370
Latitude Dual Motor Cable (37cm, r/a to r/a)
Teradek
<ul>
<li>Latitude Dual Motor Cable</li>
<li>Designed for Latitude MDR</li>
<li>Use the dual motor cable to drive 2 motors on any LATITUDE MDR.</li>
<li>All connectors are right-angled LM connectors and have colour coded overmolding allowing for an easy compact setup. 37cm length</li>
</ul>
MK3.1 Intuitive Aerial Power Cable - For MK3.1 Receiver
TRT-11-1373
MK3.1 Power Cable Intuitive Aerial (38.5cm)
Teradek
<ul>
<li>MK3.1 Power Cable Intuitive Aerial (38.5cm)</li>
<li>Intuitive Aerial power cable, for use with Aerigon drone</li>
</ul>
Latitude Motor Cable 40cm - For Latitude MDR
TRT-11-1390
Latitude Motor Cable 40cm (r/a to r/a)
Teradek
<ul>
<li>Latitude Motor Cable - 40cm</li>
<li>Designed for Latitude MDR</li>
<li>Spare Motor cable, 40cm. Note- this also works with the Receiver MK3.1, but the right angle points DOWN towards the CAM/PWR sockets.</li>
</ul>
Latitude Motor Cable 30cm - For Latitude MDR
TRT-11-1389
Latitude Motor Cable 30cm (r/a to r/a)
Teradek
<ul>
<li>Latitude Motor Cable - 30cm</li>
<li>Designed for Latitude MDR</li>
<li>Spare Motor cable, 30cm. Note - this also works with the Receiver MK3.1, but the right angle points DOWN towards the CAM/PWR sockets.</li>
</ul>
Latitude Motor Cable 20cm - For Latitude MDR
TRT-11-1388
Latitude Motor Cable 20cm (r/a to r/a)
Teradek
<ul>
<li>Latitude Motor Cable - 20cm</li>
<li>Designed for Latitude MDR</li>
<li>Spare Motor cable, 20cm. Note - this also works with the Receiver MK3.1, but the right angle points DOWN towards the CAM/PWR sockets.</li>
</ul>
MK3.1 XLR Full Size 4-pin Power Cable - For MK3.1 Receiver
TRT-11-1415
Teradek RT MK3.1 Power Cable XLR (60cm)
Teradek
<ul>
<li>Teradek RT MK3.1 Power Cable XLR (60cm)</li>
<li>Power the RTMotion from a battery or plate</li>
<li>Hirose to XLR 4-pin 60cm length</li>
</ul>
MK3.1 1m Power Cable Extension - For MK3.1 Receiver
TRT-11-1350
MK3.1 Power Cable Extension (100cm)
Teradek
<ul>
<li>MK3.1 Power Cable Extension (100cm)</li>
<li>Extend any RTMotion power cable</li>
<li>Hirose (male) to Hirose (female) Extend by 100cm</li>
</ul>
MK3.1 Proline Steadycam Power Cable - For MK3.1 Receiver
TRT-11-1395
MK3.1 Power Cable Proline Steadycam (60cm)
Teradek
<ul>
<li>MK3.1 Power Cable Proline Steadycam (60cm)</li>
<li>Power the RTMotion from the Proline Steadycam</li>
<li>Hirose 60cm Length Power the Proline Steadycam fitted with 2-pin LM 1B Power compatible rigs with pin layout:- 1- 12V 2- GND</li>
</ul>
MK3.1 MoVI Power Cable - For MK3.1 Receiver
TRT-11-1392
MK3.1 Power Cable MoVI (40cm)
Teradek
<ul>
<li>MK3.1 Power Cable MoVI (40cm)</li>
<li>Power the RTMotion from a MoVI battery</li>
<li>Hirose to JST RCY 40cm Length</li>
</ul>
MK3.1 MK-V Power Cable - For MK3.1 Receiver
TRT-11-1387
MK3.1 Power Cable MK-V (60cm)
Teradek
<ul>
<li>MK3.1 Power Cable MK-V (60cm)</li>
<li>Power the RTMotion from an MK-V power out</li>
<li>Hirose to LM 60cm Length Note: MK-V - 3-pin 12/24V</li>
</ul>
MK3.1 Steadicam Zephyr Power Cable - For MK3.1 Receiver
TRT-11-1410
MK3.1 Power Cable Steadicam Zephyr (60cm)
Teradek
<ul>
<li>MK3.1 Power Cable Steadicam Zephyr (60cm)</li>
<li>Power the RTMotion from the Steadicam Zephyr</li>
<li>Hirose to LM 60cm Length Steadicam Zephyr Also compatible with rigs with pin layout: 1- GND 2- 12V 3- 24V</li>
</ul>
MK3.1 Bare Leads Power - For MK3.1 Receiver
TRT-11-1358
MK3.1 Power Cable with Flying Leads (100cm)
Teradek
<ul>
<li>MK3.1 Power Cable with Flying Leads (100cm)</li>
<li>Make your own power cable, to power RTMotion Receiver/Motors</li>
<li>Hirose Stripped End 100cm Length Voltage must be 9-17V</li>
</ul>
MK3.1 EPIC 1 and PRO-IO Module Power Cable - For MK3.1 Receiver
TRT-11-1372
MK3.1 Power Cable EPIC +1 and PRO-IO (60cm)
Teradek
<ul>
<li>MK3.1 Power Cable EPIC +1 and PRO-IO (60cm)</li>
<li>Power the RTMotion from the EPIC +1 or PRO-IO Module</li>
<li>Hirose Connector LM Connector 60cm Length RED PRO I/O MODULE output is 1.5 A RED 1 MODULE output is 2.0 A</li>
</ul>
MK3.1 DC Power Kit - For MK3.1 Receiver
TRT-11-1367
MK3.1 Power AC/DC Kit (with International plugs)
Teradek
<ul>
<li>MK3.1 Power AC/DC Kit (with International plugs)</li>
<li>Power the RTMotion from an economy consumer style 12V lithium ion battery pack, or from a wall socket</li>
</ul>
MK3.1 Motor Cable - 60cm
TRT-11-1391
MK3.1 Motor Cable - For MK3.1 Receiver
Teradek
<ul>
<li>MK3.1 Motor Cable</li>
<li>Designed for MK3.1 Receiver</li>
<li>Slimline connection into an MK3 and MK3.1 Motor</li>
<li>Ultra flexible cable exits upwards from MOTOR (vertical) for easy routing back to the RECEIVER</li>
<li>Right Angle to Straight</li>
<li>60cm Length</li>
</ul>
Latitude M Wireless Lens Control Kit
TRT-15-0014
Wireless Lens Control Kit (Latitude-M Receiver, MK3.1 Controller)
Teradek
<h4>Latitude-M Receiver</h4>
<ul>
<li>Perfect for gimbals and shooting on the go, the Latitude M is an ultralight receiver designed to keep weight off your rig.</li>
<li>Supports up to 2 motors for Focus and Iris control</li>
<li>Wireless reception up to 5000 ft.</li>
<li>Controls run/stop, shutter, ISO, and other RED DSMC2 camera parameters</li>
<li>Controls Canon EF / Nikon AF lenses using internal motors</li>
<li>Automatic/manual calibration with proprietary algorithm for torque control</li>
<li>2.4GHz WiFi for Foolcontrol</li>
<li>Red Approved</li>
</ul>
<h4>MK3.1 Brushless Motor</h4>
<ul>
<li>The MK.3.1 Brushless Motor is a revolution in wireless lens control, offering superior response, smoother operation, and 4 times the service life of brushed motors. The motor never cogs, sparks, or skips and operates nearly silently, even at high speeds</li>
<li>Works with any Teradek RT MK 3.1 or Latitude lens control system.</li>
<li>Drive gear can be mounted on either side</li>
<li>Full range of gears available</li>
<li>Adjustable motor response for smooth to sharp moves</li>
<li>2.2 Nm maximum allowable torque</li>
<li>Support for 15mm/19mm rods with good height adjustment</li>
<li>Compact chassis design with super thin and flexible cables</li>
</ul>
<h4>MK3.1 4-Axis Controller</h4>
<ul>
<li>The 4-Axis Controller gives you extraordinarily precise control over your lens.</li>
<li>4 mappable axes: knob, slider, wheel A, wheel B</li>
<li>2.4GHz FHSS wireless system transmits latency-free commands up to 5000 ft.</li>
<li>Built-in OLED with intuitive menu system</li>
<li>Removable Canon LP-E6 battery that offers up to 36 hours of continuous runtime</li>
</ul>
Latitude Sidekick Wireless Lens Control Kit - RED
TRT-15-0020
Wireless Lens Control Kit (Latitude-SK Receiver, MK3.1 Controller) [RED DSMC2 Only]
Teradek
<h4>Latitude Sidekick Receiver</h4>
<ul>
<li>The Latitude Sidekick motor driver receiver fits seamlessly onto the side of any RED DSMC2 camera.</li>
<li>Supports up to 3 motors for Focus, Iris, and Zoom control</li>
<li>Wireless reception up to 5000 ft.</li>
<li>Controls run/stop, shutter, ISO, and other RED DSMC2 camera parameters</li>
<li>Controls Canon EF / Nikon AF lenses using internal motors</li>
<li>Automatic/manual calibration with proprietary algorithm for torque control</li>
<li>Red Approved</li>
</ul>
<h4>MK3.1 Brushless Motor</h4>
<ul>
<li>The MK.3.1 Brushless Motor is a revolution in wireless lens control, offering superior response, smoother operation, and 4 times the service life of brushed motors. The motor never cogs, sparks, or skips and operates nearly silently, even at high speeds</li>
<li>Works with any Teradek RT MK 3.1 or Latitude lens control system.</li>
<li>Drive gear can be mounted on either side</li>
<li>Full range of gears available</li>
<li>Adjustable motor response for smooth to sharp moves</li>
<li>2.2 Nm maximum allowable torque</li>
<li>Support for 15mm/19mm rods with good height adjustment</li>
<li>Compact chassis design with super thin and flexible cables</li>
</ul>
<h4>MK3.1 4-Axis Controller</h4>
<ul>
<li>The 4-Axis Controller gives you extraordinarily precise control over your lens.</li>
<li>4 mappable axes: knob, slider, wheel A, wheel B</li>
<li>2.4GHz FHSS wireless system transmits latency-free commands up to 5000 ft.</li>
<li>Built-in OLED with intuitive menu system</li>
<li>Removable Canon LP-E6 battery that offers up to 36 hours of continuous runtime</li>
</ul>
Latitude Sidekick Wireless Lens Control Kit with Forcezoom - RED
TRT-15-0021
Wireless Lens Control Kit (Latitude-SK Receiver, MK3.1 Controller+Forcezoom) [RED DSMC2 Only]
Teradek
<h4>Latitude Sidekick Reciever</h4>
<ul>
<li>The Latitude Sidekick motor driver receiver fits seamlessly onto the side of any RED DSMC2 camera.</li>
<li>Supports up to 3 motors for Focus, Iris, and Zoom control</li>
<li>Wireless reception up to 5000 ft.</li>
<li>Controls run/stop, shutter, ISO, and other RED DSMC2 camera parameters</li>
<li>Controls Canon EF / Nikon AF lenses using internal motors</li>
<li>Automatic/manual calibration with proprietary algorithm for torque control</li>
<li>Red Approved</li>
</ul>
<h4>MK3.1 Brushless Motor</h4>
<ul>
<li>The MK.3.1 Brushless Motor is a revolution in wireless lens control, offering superior response, smoother operation, and 4 times the service life of brushed motors. The motor never cogs, sparks, or skips and operates nearly silently, even at high speeds</li>
<li>Works with any Teradek RT MK 3.1 or Latitude lens control system.</li>
<li>Drive gear can be mounted on either side</li>
<li>Full range of gears available</li>
<li>Adjustable motor response for smooth to sharp moves</li>
<li>2.2 Nm maximum allowable torque</li>
<li>Support for 15mm/19mm rods with good height adjustment</li>
<li>Compact chassis design with super thin and flexible cables</li>
</ul>
<h4>MK3.1 6-Axis Controller</h4>
<ul>
<li>The 6-Axis Controller gives you extraordinarily precise control over your lens.</li>
<li>6 mappable axes: knob, slider, wheel A, wheel B</li>
<li>2.4GHz FHSS wireless system transmits latency-free commands up to 5000 ft.</li>
<li>Built-in OLED with intuitive menu system</li>
<li>Removable Canon LP-E6 battery that offers up to 36 hours of continuous runtime</li>
<li>Forcezoom joystick, which is used for controlling lens zoom with perfect accuracy</li>
</ul>
Latitude M EF Wireless Lens Control Kit - RED
TRT-15-0013
Wireless EF Lens Control Kit (Latitude-M Receiver, MK3.1 Controller) [RED]
Teradek
<h4>Latitude-M Receiver</h4>
<ul>
<li>Perfect for gimbals and shooting on the go, the Latitude M is an ultralight receiver designed to keep weight off your rig.</li>
<li>Supports up to 2 motors for Focus and Iris control</li>
<li>Wireless reception up to 5000 ft.</li>
<li>Controls run/stop, shutter, ISO, and other RED DSMC2 camera parameters</li>
<li>Controls Canon EF / Nikon AF lenses using internal motors</li>
<li>Automatic/manual calibration with proprietary algorithm for torque control</li>
<li>2.4GHz WiFi for Foolcontrol</li>
<li>Red Approved</li>
</ul>
<h4>MK3.1 4-Axis Controller</h4>
<ul>
<li>The 4-Axis Controller gives you extraordinarily precise control over your lens.</li>
<li>4 mappable axes: knob, slider, wheel A, wheel B</li>
<li>2.4GHz FHSS wireless system transmits latency-free commands up to 5000 ft.</li>
<li>Built-in OLED with intuitive menu system</li>
<li>Removable Canon LP-E6 battery that offers up to 36 hours of continuous runtime</li>
</ul>
Latitude MB EF Wireless Lens Control Kit - RED
TRT-15-0016
Wireless EF Lens Control Kit (Latitude-MB Receiver, MK3.1 Controller) [RED]
Teradek
<h4>Latitude-MB Receiver</h4>
<ul>
<li>Identical to the Latitude M, the Latitude MB receiver adds an LP-E6 battery plate.</li>
<li>Supports up to 2 motors for Focus and Iris control</li>
<li>Wireless reception up to 5000 ft.</li>
<li>Controls run/stop, shutter, ISO, and other RED DSMC2 camera parameters</li>
<li>Controls Canon EF / Nikon AF lenses using internal motors</li>
<li>Automatic/manual calibration with proprietary algorithm for torque control</li>
<li>2.4GHz WiFi for Foolcontrol</li>
<li>Red Approved</li>
</ul>
<h4>MK3.1 4-Axis Controller</h4>
<ul>
<li>The 4-Axis Controller gives you extraordinarily precise control over your lens.</li>
<li>4 mappable axes: knob, slider, wheel A, wheel B</li>
<li>2.4GHz FHSS wireless system transmits latency-free commands up to 5000 ft.</li>
<li>Built-in OLED with intuitive menu system</li>
<li>Removable Canon LP-E6 battery that offers up to 36 hours of continuous runtime</li>
</ul>
Latitude Sidekick EF Wireless Lens Control Kit - RED
TRT-15-0019
Wireless EF Lens Control Kit (Latitude-SK Receiver, MK3.1 Controller) [RED DSMC2 Only]
Teradek
<h4>Latitude Sidekick Receiver</h4>
<ul>
<li>The Latitude Sidekick motor driver receiver fits seamlessly onto the side of any RED DSMC2 camera.</li>
<li>Supports up to 3 motors for Focus, Iris, and Zoom control</li>
<li>Wireless reception up to 5000 ft.</li>
<li>Controls run/stop, shutter, ISO, and other RED DSMC2 camera parameters</li>
<li>Controls Canon EF / Nikon AF lenses using internal motors</li>
<li>Automatic/manual calibration with proprietary algorithm for torque control</li>
<li>Red Approved</li>
</ul>
<h4>MK3.1 4-Axis Controller</h4>
<ul>
<li>The 4-Axis Controller gives you extraordinarily precise control over your lens.</li>
<li>4 mappable axes: knob, slider, wheel A, wheel B</li>
<li>2.4GHz FHSS wireless system transmits latency-free commands up to 5000 ft.</li>
<li>Built-in OLED with intuitive menu system</li>
<li>Removable Canon LP-E6 battery that offers up to 36 hours of continuous runtime</li>
</ul>
Bolt Manager
TER-BOLT-MANAGER
Quick configuration tool for all Bolt models
Teradek
<ul>
<li>Quick configuration tool for all Bolt models (3rd Generation or newer)</li>
<li>Update firmware & pair receivers with the click of a button</li>
<li>Manage channels across a multi-receiver set</li>
<li>Does not require a computer</li>
<li>Connect up to 4 receivers at once</li>
</ul>
<h4>Specifications</h4>
<ul>
<li><strong>Material:</strong> Machined Aluminum, black anodized & lasered</li>
<li><strong>Dimensions:</strong> Approx 5in x 5in x 2in</li>
<li><strong>Weight:</strong> 8.7 oz</li>
<li><strong>Mountability:</strong> table top, with rubber feet</li>
<li><strong>Output Voltage:</strong> 14.4V max from D-Tap Connector</li>
<li><strong>Configuration Interfaces:</strong> OLED with 2 x joysticks and status LEDs | WebUI for firmware upgrade</li>
<li><strong>Usb Interface Functionality:</strong> 5 Powered USB 2.0 host port | Upgrade via Mini-USB</li>
<li><strong>Power Input:</strong> 2 pin-connector 6-28V DC</li>
<li><strong>Battery:</strong> None</li>
<li><strong>Operating Temperature:</strong> 0 - 50 degrees C ambient</li>
<li><strong>Humidity:</strong> 0-95% non-condensing</li>
<li><strong>Ethernet:</strong> 10/100BASE-T</li>
<li><strong>Wireless:</strong> WiFi: Dual Band MIMO 802.11 a/b/g/n</li>
</ul>
<ul>
<li>2x 2dBi Wifi 2.4/5.8 GHz</li>
<li>1x 2-pin Connector to PowerTap 18 inch Cable</li>
<li>5x Mini USB (5pin) to USB - 18 inch Cable</li>
<li>1x Ethernet Cable</li>
</ul>
Bolt 10K V-Mount
TER-BOLT-999-V
HD-SDI/HDMI Wireless RX - V-Mount
Teradek
<ul>
<li>HD-SDI/HDMI Wireless RX</li>
<li>Gives drone operators and cinematographers a pristine zero delay wireless video feed up to 10,000 ft. line of sight.</li>
<li>Super long range (10,000 ft.) receiver for Bolt 3000 TX</li>
<li>Built-in Gold or V-mount battery plate</li>
<li>SDI and HDMI outputs</li>
</ul>
<h4>Specifications</h4>
<ul>
<li>Wireless Range: 10,000ft</li>
<li>Number of 20 MHz Channels*: 24</li>
<li>Number of 40 MHz Channels**: 11</li>
<li>Input/Output: 3G-SDI & HDMI</li>
<li>Resolution / Frame Rate: 1080p60</li>
<li>Manual Channel Selection: Y</li>
<li>5 GHz Spectrum Analyzer: Y</li>
<li>Metadata/Timecode: Y</li>
</ul>
<p>* 20MHz channels cannot utilize interlaced, PSF, or 1080p60/50 at this time.<br /> ** Based on USA channels. Channel availability may vary by region.</p>
<ul>
<li>1x SDI (BNC to BNC) Cable 10 inch</li>
<li>1x HDMI 18in Cable (Type A to Type A)</li>
<li>1x Protective SKB Case - military-standard waterproof hard case with custom foam (22in x 17in x 8in)1 x Lightstand Adapter (3/8 inch)</li>
<li>1x PSU 2-pin Connector to 18W AC Adapter 6ft cable</li>
<li>1x USB 3.0 Cable A to Micro B (3ft Length)</li>
</ul>
Bond 659 V
TER-BOND659V
Bond AVC Backpack + MPEG-TS - V-Mount with EU Nodes
Teradek
<h4>Next Level Mobile Broadcasting</h4>
<p>The Bond Backpack is an all in one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.</p>
<h4>High Gain Antennas</h4>
<p>Wireless reception for Teradek Node modems is greatly enhanced with two high gain antennas attached to the interior of the backpack.</p>
<h4>Gold or V Mount Battery Plate</h4>
<p>Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.</p>
<h4>Node Modems</h4>
<p>Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.</p>
<h4>Integrated Locking Cables</h4>
<p>To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.</p>
<h4>AVC Bonding Codec</h4>
<p>At the heart of the Bond Backpack is the Cube encoder, a High Profile AVC encoder that supports bitrates up to 15 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. HEVC encoders are also available. Please see Bond 759.</p>
<h4>Active Cooling</h4>
<p>To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.</p>
<h4>Ergonomic, Weather Resistant Design</h4>
<p>The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.</p>
<ul>
<li>Bond AVC Backpack + MPEG-TS</li>
<li>All in one complete Bonding Solution</li>
<li>Real-Time H.264 Encoder (Also available with HEVC/H.265 support. See <a href="/Teradek/Bond+759+GU">Bond 759</a>)</li>
<li>Network Bonding with LTE Modems and</li>
<li>High Gain Antennas</li>
<li>Gold or V Mount Battery Options (battery not included)</li>
<li>Integrated Locking Cables</li>
<li>Active Cooling keeps gear running optimally</li>
</ul>
<ul>
<li>1 x Backpack with Gold Mount</li>
<li>1 x Cube 655 AVC Encoder</li>
<li>2 x Antenna 2dBi Wifi 2.4/5.8GHz</li>
<li>1 x SDI BNC to BNC Cable</li>
<li>1 x Bond Expansion Module</li>
<li>1 x Quick Start Guide</li>
<li>8 x Antenna 2G/3G/4G Sma Mount</li>
<li>1 x 2-pin to PTap 6.5in Cable</li>
<li>1 x 4-pin Connector to 4pin Connector 34inch cable</li>
</ul>
Bond 659 G
TER-BOND659G
Bond AVC Backpack + MPEG-TS - Gold Mount with EU Nodes
Teradek
<h4>Next Level Mobile Broadcasting</h4>
<p>The Bond Backpack is an all in one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.</p>
<h4>High Gain Antennas</h4>
<p>Wireless reception for Teradek Node modems is greatly enhanced with two high gain antennas attached to the interior of the backpack.</p>
<h4>Gold or V Mount Battery Plate</h4>
<p>Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.</p>
<h4>Node Modems</h4>
<p>Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.</p>
<h4>Integrated Locking Cables</h4>
<p>To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.</p>
<h4>AVC Bonding Codec</h4>
<p>At the heart of the Bond Backpack is the Cube encoder, a High Profile AVC encoder that supports bitrates up to 15 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. HEVC encoders are also available. Please see Bond 759.</p>
<h4>Active Cooling</h4>
<p>To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.</p>
<h4>Ergonomic, Weather Resistant Design</h4>
<p>The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.</p>
<ul>
<li>Bond AVC Backpack + MPEG-TS</li>
<li>All in one complete Bonding Solution</li>
<li>Real-Time H.264 Encoder (Also available with HEVC/H.265 support. See <a href="/Teradek/Bond+759+GU">Bond 759</a>)</li>
<li>Network Bonding with LTE Modems and</li>
<li>High Gain Antennas</li>
<li>Gold or V Mount Battery Options (battery not included)</li>
<li>Integrated Locking Cables</li>
<li>Active Cooling keeps gear running optimally</li>
</ul>
<ul>
<li>1 x Backpack with Gold Mount</li>
<li>1 x Cube 655 AVC Encoder</li>
<li>2 x Antenna 2dBi Wifi 2.4/5.8GHz</li>
<li>1 x SDI BNC to BNC Cable</li>
<li>1 x Bond Expansion Module</li>
<li>1 x Quick Start Guide</li>
<li>8 x Antenna 2G/3G/4G Sma Mount</li>
<li>1 x 2-pin to PTap 6.5in Cable</li>
<li>1 x 4-pin Connector to 4pin Connector 34inch cable</li>
</ul>
Bond 759 V
TER-BOND759V
Bond HEVC/AVC Backpack + MPEG-TS - V-Mount with EU Nodes
Teradek
<h4>Next Level Mobile Broadcasting</h4>
<p>The Bond Backpack is an all in one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.</p>
<h4>High Gain Antennas</h4>
<p>Wireless reception for Teradek Node modems is greatly enhanced with two high gain antennas attached to the interior of the backpack.</p>
<h4>Gold or V Mount Battery Plate</h4>
<p>Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.</p>
<h4>Node Modems</h4>
<p>Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.</p>
<h4>Integrated Locking Cables</h4>
<p>To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.</p>
<h4>HEVC/AVC Bonding Codec</h4>
<p>At the heart of the Bond Backpack is the Cube encoder, a High Profile HEVC encoder that supports bitrates up to 30 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. H.264 only encoders are also available.</p>
<h4>Active Cooling</h4>
<p>To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.</p>
<h4>Ergonomic, Weather Resistant Design</h4>
<p>The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.</p>
<ul>
<li>Bond HEVC/AVC Backpack + MPEG-TS</li>
<li>All in one complete Bonding Solution</li>
<li>Real-Time HEVC/AVC (H.265/H.264) Encoder (Also available in just H.264 only. See Bond 659)</li>
<li>Network Bonding with LTE Modems and</li>
<li>High Gain Antennas</li>
<li>Gold or V Mount Battery Options (battery not included)</li>
<li>Integrated Locking Cables</li>
<li>Active Cooling keeps gear running optimally</li>
</ul>
<ul>
<li>1 x Backpack with Gold-Mount</li>
<li>1 x Cube 755 HEVC/AVC Encoder</li>
<li>2 x Antenna 2dBi Wifi 2.4/5.8GHz</li>
<li>1 x SDI BNC to BNC Cable</li>
<li>1 x Bond Expansion Module</li>
<li>1 x Quick Start Guide</li>
<li>8 x Antenna 2G/3G/4G Sma Mount</li>
<li>1 x 2-pin to PTap 6.5in Cable</li>
<li>1 x 4-pin Connector to 4pin Connector 34inch cable</li>
</ul>
Bond 759 G
TER-BOND759G
Bond HEVC/AVC Backpack + MPEG-TS - Gold Mount with EU Nodes
Teradek
<h4>Next Level Mobile Broadcasting</h4>
<p>The Bond Backpack is an all in one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.</p>
<h4>High Gain Antennas</h4>
<p>Wireless reception for Teradek Node modems is greatly enhanced with two high gain antennas attached to the interior of the backpack.</p>
<h4>Gold or V Mount Battery Plate</h4>
<p>Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.</p>
<h4>Node Modems</h4>
<p>Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.</p>
<h4>Integrated Locking Cables</h4>
<p>To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.</p>
<h4>HEVC/AVC Bonding Codec</h4>
<p>At the heart of the Bond Backpack is the Cube encoder, a High Profile HEVC encoder that supports bitrates up to 30 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. H.264 only encoders are also available.</p>
<h4>Active Cooling</h4>
<p>To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.</p>
<h4>Ergonomic, Weather Resistant Design</h4>
<p>The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.</p>
<ul>
<li>Bond HEVC/AVC Backpack + MPEG-TS</li>
<li>All in one complete Bonding Solution</li>
<li>Real-Time HEVC/AVC (H.265/H.264) Encoder (Also available in just H.264 only. See Bond 659)</li>
<li>Network Bonding with LTE Modems and</li>
<li>High Gain Antennas</li>
<li>Gold or V Mount Battery Options (battery not included)</li>
<li>Integrated Locking Cables</li>
<li>Active Cooling keeps gear running optimally</li>
</ul>
<ul>
<li>1 x Backpack with Gold-Mount</li>
<li>1 x Cube 755 HEVC/AVC Encoder</li>
<li>2 x Antenna 2dBi Wifi 2.4/5.8GHz</li>
<li>1 x SDI BNC to BNC Cable</li>
<li>1 x Bond Expansion Module</li>
<li>1 x Quick Start Guide</li>
<li>8 x Antenna 2G/3G/4G Sma Mount</li>
<li>1 x 2-pin to PTap 6.5in Cable</li>
<li>1 x 4-pin Connector to 4pin Connector 34inch cable</li>
</ul>
Bolt 500 XT 3G-SDI / HDMI 2 x RX Wireless Video Transceiver Set
TER-BOLT-938XT
Bolt 500 XT SDI/HDMI Wireless TX/2RX
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
</ul>
Bolt 3000 XT Deluxe Kit SDI / HDMI Gold Mount Wireless Video Transceiver Set
TER-BOLT-995XT-1G
Bolt 3000 XT SDI/HDMI Wireless TX/RX Deluxe Kit - Gold Mount
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
Bolt 3000 XT 3G-SDI / HDMI Video Transceiver Set
TER-BOLT-995XT
Bolt 3000 XT SDI/HDMI Wireless TX/RX
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
Bolt 3000 XT 3G-SDI / HDMI Transmitter
TER-BOLT-996XT
Bolt 3000 XT SDI/HDMI Wireless TX
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
Bolt 3000 XT 3G-SDI / HDMI Receiver
TER-BOLT-997XT
Bolt 3000 XT SDI/HDMI Wireless RX
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
VidiU Go
TER-VIDIUGO
HEVC / H.264 live streaming encoder with professional bonded cellular technology
Teradek
<h4>DO MORE WITH YOUR LIVE CONTENT</h4>
<p>Anybody can stream live online, but not everyone can make it professional. With VidiU Go, your live production is taken to the next level with broadcast quality 1080p60 video, bonded network redundancy, and cutting edge HEVC compression.</p>
<p>With HDMI and SDI inputs, VidiU Go seamlessly connects with both consumer and professional cameras, in addition to popular video switchers from Newtek, Roland, vMix, and more.</p>
<h4>STREAM OVER BONDED NETWORKS</h4>
<p>VidiU Go was designed to perform in the most challenging production environments, which is why we’ve included the very same bonding technology found in our high end broadcast systems. Never drop another live broadcast by streaming over the combined bandwidth from Ethernet, WiFi, and up to two 3G / 4G / LTE modems, or use several iPhone and Android smartphones as hotspots for even more bandwidth redundancy.</p>
<h4>BROADCAST QUALITY MODEMS</h4>
<p>Node is our cutting-edge, broadcast grade 4G / LTE modems that offer 2 to 3 times the performance of carrier-branded modems while fitting seamlessly to the sides of the VidiU Go chassis.</p>
<h4>CORE & SHARELINK</h4>
<p>Take your VidiU Go to the next level with several of our optional cloud-based tools that can help you distribute your content and streamline your workflow.</p>
<table class="table">
<tbody>
<tr>
<th> </th>
<th>Sharelink</th>
<th>Core</th>
</tr>
<tr>
<th>Bonding</th>
<td>Y</td>
<td>Y</td>
</tr>
<tr>
<th>Multiplatform Delivery</th>
<td>Y</td>
<td>Y</td>
</tr>
<tr>
<th>HEVC Support</th>
<td>N</td>
<td>Y</td>
</tr>
<tr>
<th>Archiving</th>
<td>N</td>
<td>Y</td>
</tr>
<tr>
<th>Remote Configuration</th>
<td>N</td>
<td>Y</td>
</tr>
</tbody>
</table>
<h4>Stream To Multiple Destinations</h4>
<p>Expand the reach of your content and build a larger audience by streaming to multiple platforms at the same time. With Core and Sharelink, you can stream live on all of your favorite OVPs simultaneously, including multiple Facebook pages, Twitch, YouTube, and more.</p>
<h4>Remote Configuration</h4>
<p>We understand that VidiU Go is a critical component of your live broadcast, so we’ve built remote management into the Core and Sharelink platforms so your team can configure and prepare the encoder ahead of time from anywhere in the world.</p>
<h4>Stream On The Cutting Edge</h4>
<p>While the RTMP protocol does not yet support HEVC compression, our transcoding engine allows you to take advantage of H.265’s bandwidth savings while ensuring video delivery in the common H.264 format.</p>
<ul>
<li>HEVC / H.264 live streaming encoder with professional bonded cellular technology</li>
<li>Instant Live Streaming</li>
<li>Stream with HEVC or H.264 compression</li>
<li>Supports up to two high performance 3G / 4G / LTE Teradek <a href="/Teradek/Node+-+VidiU+Go">Node</a> modems</li>
<li>3G-SDI and HDMI inputs | USB-C power</li>
<li>Streams to any online video platform, including Facebook, YouTube, Periscope, and more</li>
<li>Streams to multiple video platforms simultaneously with Core and Sharelink</li>
</ul>
Link Pro
TER-LINKPRO
High Performance Bonded Cellular WiFi Access Point
Teradek
<p>Link pro packs professional network bonding into a high performance WiFi access point, giving broadcasters, production companies, and first responders reliable, high speed internet access at any location.</p>
<p>Link Pro is a high throughput, dual-band WiFi access point with a 1000 ft. range and the very same bonding technology found in Teradek’s powerful Bond series of video transmission devices. What sets Link Pro apart is its ability to offer reliable network connectivity by aggregating bandwidth from 4x 3G / 4G / LTE modems, allowing anybody to surf the web, check their email, upload files, or even stream live video online from areas they otherwise couldn’t before.</p>
<p>Available as a backpack, flight case, radome, and as a standalone version for systems integration, Link Pro’s flexibility ensures there is a model for every situation. To ensure the best possible cellular reception, Teradek has included 4 of their high performance Node 3G / 4G/ LTE modems, which provide extraordinary connectivity and bandwidth throughput compared to standard USB modems.</p>
<p>Link Pro isn’t just a powerful access point, it is also incredibly durable and power efficient. Its super rugged aluminum chassis is designed to withstand the rigors of constant use in production environments, natural disaster zones, and inclement weather and its Gold or V-mount battery plate ensures you’re up and running for long periods of time while you’re mobile.</p>
<p>Link Pro includes two gigabit Ethernet ports, 4 locking connectors for Teradek’s Node LTE modems (USB to 4-pin connector cables available for standard modems), and a 2-pin locking connector for AC power.</p>
<p>To enable bonding, a subscription to Teradek’s Core service is required.</p>
<ul>
<li>High Performance Bonded Cellular WiFi Access Point</li>
<li>2.4 / 5GHz | 802.11ac WiFi with 1000 ft. range</li>
<li>Supports up to 4x 3G / 4G / LTE modems, including Teradek Nodes</li>
<li>Gold- or V-mount battery mount available</li>
<li>Perfect for web browsing and streaming video from any H.264 or HEVC encoder</li>
<li>Core subscription required for bonding</li>
</ul>
Link Pro Backpack - Gold Mount
TER-LINKPROAB-BP
High Performance Bonded Cellular WiFi Access Point - Backpack - Gold Mount
Teradek
<p>Link pro packs professional network bonding into a high performance WiFi access point, giving broadcasters, production companies, and first responders reliable, high speed internet access at any location.</p>
<p>Link Pro is a high throughput, dual-band WiFi access point with a 1000 ft. range and the very same bonding technology found in Teradek’s powerful Bond series of video transmission devices. What sets Link Pro apart is its ability to offer reliable network connectivity by aggregating bandwidth from 4x 3G / 4G / LTE modems, allowing anybody to surf the web, check their email, upload files, or even stream live video online from areas they otherwise couldn’t before.</p>
<p>Available as a backpack, flight case, radome, and as a standalone version for systems integration, Link Pro’s flexibility ensures there is a model for every situation. To ensure the best possible cellular reception, Teradek has included 4 of their high performance Node 3G / 4G/ LTE modems, which provide extraordinary connectivity and bandwidth throughput compared to standard USB modems.</p>
<p>Link Pro isn’t just a powerful access point, it is also incredibly durable and power efficient. Its super rugged aluminum chassis is designed to withstand the rigors of constant use in production environments, natural disaster zones, and inclement weather and its Gold or V-mount battery plate ensures you’re up and running for long periods of time while you’re mobile.</p>
<p>Link Pro includes two gigabit Ethernet ports, 4 locking connectors for Teradek’s Node LTE modems (USB to 4-pin connector cables available for standard modems), and a 2-pin locking connector for AC power.</p>
<p>To enable bonding, a subscription to Teradek’s Core service is required.</p>
<ul>
<li>High Performance Bonded Cellular WiFi Access Point</li>
<li>2.4 / 5GHz | 802.11ac WiFi with 1000 ft. range</li>
<li>Supports up to 4x 3G / 4G / LTE modems, including Teradek Nodes</li>
<li>Gold- or V-mount battery mount available</li>
<li>Perfect for web browsing and streaming video from any H.264 or HEVC encoder</li>
<li>Core subscription required for bonding</li>
</ul>
Bolt for Sony Venice
TER-BOLT-1994
Integrated Bolt Wireless Video System for Sony Venice - 3000
Teradek
<ul>
<li>Integrated Bolt Wireless Video System for Sony Venice</li>
<li>Bolt zero delay wireless video system will be integrated into the Sony Venice ecosystem</li>
<li>Available as 500, 1000 and 3000ft models</li>
<li>Compatible with the Bolt XT, Bolt LT, 703 Bolt, Focus Bolt RX, and all third-generation Bolt systems</li>
<li>Passes data, audio and video via the camera’s rear 144-pin connector</li>
<li>Multicast capable up to 4 receivers</li>
<li>Includes Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in on set</li>
</ul>
Bolt 1000 XT Deluxe Kit SDI / HDMI V-Mount Wireless Video Transceiver Set
TER-BOLT-965XT-1V
Bolt 1000 XT Deluxe Kit - V-Mount
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
Bolt 3000 XT Deluxe Kit SDI / HDMI V-Mount Wireless Video Transceiver Set
TER-BOLT-995XT-1V
Bolt 3000 XT SDI/HDMI Wireless TX/RX Deluxe Kit - V-Mount
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
Bolt 500 XT Deluxe Kit 3G-SDI / HDMI 2 RX V-Mount Video Transceiver Set
TER-BOLT-935XT-2V
Bolt 500 XT 2 x RX Deluxe Kit - V-Mount
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
</ul>
Bolt 1000 XT Deluxe Kit 3G-SDI / HDMI 2 RX V-Mount Video Transceiver Set
TER-BOLT-965XT-2V
Bolt 1000 XT 2 x RX Deluxe Kit - V-Mount
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
Bolt 3000 XT Deluxe Kit 3G-SDI / HDMI 2 RX Gold Mount Video Transceiver Set
TER-BOLT-995XT-2G
Bolt 3000 XT 2 x RX Deluxe Kit - Gold Mount
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
Bolt 3000 XT Deluxe Kit 3G-SDI / HDMI 2 RX V-Mount Video Transceiver Set
TER-BOLT-995XT-2V
Bolt 3000 XT 2 x RX Deluxe Kit - V-Mount
Teradek
<p>The Bolt XT satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget.</p>
<p>A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.</p>
<p>Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance and a quick set-up. With the Bolt XT line, Teradek has added an integrated NATO rail on the receiver, several 1/4”-20 and 3/8” mounting points, and an ARRI rosette on the transmitter to greatly improve available mounting options.</p>
<p>An all-new aluminum chassis further reduces the size and weight of the Bolt line, with receivers also allowing for integrated pass-through power. Available battery plate accessories include V- or Gold-mount, in addition to bi-directional Sony L-series or Canon LP-E6 plates on the Bolt 500 XT. Teradek has also replaced the internal antennas on the Bolt 500 XT transmitter with an external set to enhance wireless performance when operating in environments with large obstacles or heavy interference.</p>
<p>The Bolt XT, like the previous generation, is multicast capable up to 4 receivers and includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5GHz spectrum analyzer to keep an eye on interference in your area.</p>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
Bolt 3000 XT 2 x RX Transceiver Set / Bolt 10K Deluxe Kit Gold Mount
TER-BOLT-999XT-2G
Bolt 3000 XT TX / 2 x RX Set and Bolt 10K RX HD-SDI/HDMI Kit - Gold Mount
Teradek
<p>A very long range (10,000 ft.) receiver, Bolt 10K comes complete with accessories and Protective SKB Case. With a fully integrated panel antenna and battery plate, Teradek Bolt 10K has 3G-SDI and HDMI outputs and works alongside Bolt 3000 XT, 703 Bolt, and Sidekick II receivers. Available standalone and with a 3000 XT Transceiver in a kit. Gold Mount or V-Mount battery options.</p>
<p>It is compatible with Bolt 3000 transmitters and functions seamlessly alongside 3000 XT receivers, Sidekick II, and the 703 Bolt. Bolt 10K receivers support 1080p60 4:2:2 video and with a newly-designed chassis, hassle-free Tx/Rx pairing, robust range and visually lossless HD quality make this an exceptional performer. </p>
<h4>Bolt XT 3000</h4>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
<h4>BOLT 10K</h4>
<ul>
<li>HD-SDI/HDMI Wireless RX</li>
<li>Gives drone operators and cinematographers a pristine zero delay wireless video feed up to 10,000 ft. line of sight.</li>
<li>Super long range (10,000 ft.) receiver for Bolt 3000 TX</li>
<li>Built-in Gold or V-mount battery plate</li>
<li>SDI and HDMI outputs</li>
</ul>
Bolt 3000 XT 2 x RX Transceiver Set / Bolt 10K Deluxe Kit V-Mount
TER-BOLT-999XT-2V
Bolt 3000 XT TX / 2 x RX Set and Bolt 10K RX HD-SDI/HDMI Kit - V-Mount
Teradek
<p>A very long range (10,000 ft.) receiver, Bolt 10K comes complete with accessories and Protective SKB Case. With a fully integrated panel antenna and battery plate, Teradek Bolt 10K has 3G-SDI and HDMI outputs and works alongside Bolt 3000 XT, 703 Bolt, and Sidekick II receivers. Available standalone and with a 3000 XT Transceiver in a kit. Gold Mount or V-Mount battery options.</p>
<p>It is compatible with Bolt 3000 transmitters and functions seamlessly alongside 3000 XT receivers, Sidekick II, and the 703 Bolt. Bolt 10K receivers support 1080p60 4:2:2 video and with a newly-designed chassis, hassle-free Tx/Rx pairing, robust range and visually lossless HD quality make this an exceptional performer. </p>
<h4>Bolt XT 3000</h4>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
<h4>BOLT 10K</h4>
<ul>
<li>HD-SDI/HDMI Wireless RX</li>
<li>Gives drone operators and cinematographers a pristine zero delay wireless video feed up to 10,000 ft. line of sight.</li>
<li>Super long range (10,000 ft.) receiver for Bolt 3000 TX</li>
<li>Built-in Gold or V-mount battery plate</li>
<li>SDI and HDMI outputs</li>
</ul>
Link Pro Backpack - V-Mount
TER-LINKPROV-BP
High Performance Bonded Cellular WiFi Access Point - Backpack - V-Mount
Teradek
<p>Link pro packs professional network bonding into a high performance WiFi access point, giving broadcasters, production companies, and first responders reliable, high speed internet access at any location.</p>
<p>Link Pro is a high throughput, dual-band WiFi access point with a 1000 ft. range and the very same bonding technology found in Teradek’s powerful Bond series of video transmission devices. What sets Link Pro apart is its ability to offer reliable network connectivity by aggregating bandwidth from 4x 3G / 4G / LTE modems, allowing anybody to surf the web, check their email, upload files, or even stream live video online from areas they otherwise couldn’t before.</p>
<p>Available as a backpack, flight case, radome, and as a standalone version for systems integration, Link Pro’s flexibility ensures there is a model for every situation. To ensure the best possible cellular reception, Teradek has included 4 of their high performance Node 3G / 4G/ LTE modems, which provide extraordinary connectivity and bandwidth throughput compared to standard USB modems.</p>
<p>Link Pro isn’t just a powerful access point, it is also incredibly durable and power efficient. Its super rugged aluminum chassis is designed to withstand the rigors of constant use in production environments, natural disaster zones, and inclement weather and its Gold or V-mount battery plate ensures you’re up and running for long periods of time while you’re mobile.</p>
<p>Link Pro includes two gigabit Ethernet ports, 4 locking connectors for Teradek’s Node LTE modems (USB to 4-pin connector cables available for standard modems), and a 2-pin locking connector for AC power.</p>
<p>To enable bonding, a subscription to Teradek’s Core service is required.</p>
<ul>
<li>High Performance Bonded Cellular WiFi Access Point</li>
<li>2.4 / 5GHz | 802.11ac WiFi with 1000 ft. range</li>
<li>Supports up to 4x 3G / 4G / LTE modems, including Teradek Nodes</li>
<li>Gold- or V-mount battery mount available</li>
<li>Perfect for web browsing and streaming video from any H.264 or HEVC encoder</li>
<li>Core subscription required for bonding</li>
</ul>
Link Pro - V-Mount
TER-LINKPROV
High Performance Bonded Cellular WiFi Access Point - V-Mount
Teradek
<p>Link pro packs professional network bonding into a high performance WiFi access point, giving broadcasters, production companies, and first responders reliable, high speed internet access at any location.</p>
<p>Link Pro is a high throughput, dual-band WiFi access point with a 1000 ft. range and the very same bonding technology found in Teradek’s powerful Bond series of video transmission devices. What sets Link Pro apart is its ability to offer reliable network connectivity by aggregating bandwidth from 4x 3G / 4G / LTE modems, allowing anybody to surf the web, check their email, upload files, or even stream live video online from areas they otherwise couldn’t before.</p>
<p>Available as a backpack, flight case, radome, and as a standalone version for systems integration, Link Pro’s flexibility ensures there is a model for every situation. To ensure the best possible cellular reception, Teradek has included 4 of their high performance Node 3G / 4G/ LTE modems, which provide extraordinary connectivity and bandwidth throughput compared to standard USB modems.</p>
<p>Link Pro isn’t just a powerful access point, it is also incredibly durable and power efficient. Its super rugged aluminum chassis is designed to withstand the rigors of constant use in production environments, natural disaster zones, and inclement weather and its Gold or V-mount battery plate ensures you’re up and running for long periods of time while you’re mobile.</p>
<p>Link Pro includes two gigabit Ethernet ports, 4 locking connectors for Teradek’s Node LTE modems (USB to 4-pin connector cables available for standard modems), and a 2-pin locking connector for AC power.</p>
<p>To enable bonding, a subscription to Teradek’s Core service is required.</p>
<ul>
<li>High Performance Bonded Cellular WiFi Access Point</li>
<li>2.4 / 5GHz | 802.11ac WiFi with 1000 ft. range</li>
<li>Supports up to 4x 3G / 4G / LTE modems, including Teradek Nodes</li>
<li>Gold- or V-mount battery mount available</li>
<li>Perfect for web browsing and streaming video from any H.264 or HEVC encoder</li>
<li>Core subscription required for bonding</li>
</ul>
Link Pro - Gold Mount
TER-LINKPROAB
High Performance Bonded Cellular WiFi Access Point - Gold Mount
Teradek
<p>Link pro packs professional network bonding into a high performance WiFi access point, giving broadcasters, production companies, and first responders reliable, high speed internet access at any location.</p>
<p>Link Pro is a high throughput, dual-band WiFi access point with a 1000 ft. range and the very same bonding technology found in Teradek’s powerful Bond series of video transmission devices. What sets Link Pro apart is its ability to offer reliable network connectivity by aggregating bandwidth from 4x 3G / 4G / LTE modems, allowing anybody to surf the web, check their email, upload files, or even stream live video online from areas they otherwise couldn’t before.</p>
<p>Available as a backpack, flight case, radome, and as a standalone version for systems integration, Link Pro’s flexibility ensures there is a model for every situation. To ensure the best possible cellular reception, Teradek has included 4 of their high performance Node 3G / 4G/ LTE modems, which provide extraordinary connectivity and bandwidth throughput compared to standard USB modems.</p>
<p>Link Pro isn’t just a powerful access point, it is also incredibly durable and power efficient. Its super rugged aluminum chassis is designed to withstand the rigors of constant use in production environments, natural disaster zones, and inclement weather and its Gold or V-mount battery plate ensures you’re up and running for long periods of time while you’re mobile.</p>
<p>Link Pro includes two gigabit Ethernet ports, 4 locking connectors for Teradek’s Node LTE modems (USB to 4-pin connector cables available for standard modems), and a 2-pin locking connector for AC power.</p>
<p>To enable bonding, a subscription to Teradek’s Core service is required.</p>
<ul>
<li>High Performance Bonded Cellular WiFi Access Point</li>
<li>2.4 / 5GHz | 802.11ac WiFi with 1000 ft. range</li>
<li>Supports up to 4x 3G / 4G / LTE modems, including Teradek Nodes</li>
<li>Gold- or V-mount battery mount available</li>
<li>Perfect for web browsing and streaming video from any H.264 or HEVC encoder</li>
<li>Core subscription required for bonding</li>
</ul>
Radome
TER-LINKPRO-RADOME
Outdoor Cellular Antenna housing for 4 Teradek Nodes - Europe & Asia Pacific
Teradek
<ul>
<li>Outdoor Cellular Antenna housing for 4 Teradek Nodes (included)</li>
<li>Radome attaches to a Link Pro standalone modem for optimized Node placement</li>
<li>Designed for installation on vehicles (EMS, law enforcement, industrial, etc.) to endure the harshest of elements and weather and provide a consistent Internet connection anywhere you go</li>
</ul>
Link Pro Radome
TER-LINKPRO-RADW
Wireless Access Point Router + Outdoor Cellular Antenna housing for 4 Teradek Nodes - Europe & Asia Pacific
Teradek
<h4>Link Pro</h4>
<ul>
<li>High Performance Bonded Cellular WiFi Access Point</li>
<li>2.4 / 5GHz | 802.11ac WiFi with 1000 ft. range</li>
<li>Supports up to 4x 3G / 4G / LTE modems, including Teradek Nodes</li>
<li>Gold- or V-mount battery mount available</li>
<li>Perfect for web browsing and streaming video from any H.264 or HEVC encoder</li>
<li>Core subscription required for bonding</li>
</ul>
<h4>Radome</h4>
<ul>
<li>Outdoor Cellular Antenna housing for 4 Teradek Nodes</li>
<li>Radome attaches to a Link Pro standalone modem for optimized Node placement</li>
<li>Designed for installation on vehicles (EMS, law enforcement, industrial, etc.) to endure the harshest of elements and weather and provide a consistent Internet connection anywhere you go</li>
</ul>
Node - VidiU Go
TER-NODEEU-VIDIU
High performance 3G / 4G / LTE modem for VidiU Go - Europe/APAC
Teradek
<ul>
<li>High performance 3G / 4G / LTE modem</li>
<li>Designed for VidiU Go</li>
</ul>
Cube 725
TER-CUBE725
Real-Time H.265/H.264 (HEVC/AVC) Decoder
Teradek
<p>Cube 725 is the latest in Teradek’s line of professional, scalable integrated decoders designed for video over IP delivery. Compatible with Cube encoders, Cube 625 offers SD/HD MPEG-4 HEVC/AVC decoding for point-to-point video distribution, allowing content creators, broadcasters and system integrators to cost-effectively and reliably meet strict QoS requirements.</p>
<p>With flexible HDMI/3G-SDI dual-output and Ethernet/WiFi (2.4/5Ghz)/cellular USB connection options, Cube 725 streamlines IP video deployment in existing workflows and enhances infrastructure for all users. Small form factor and high-performance decoding make it one of the most versatile solutions for content delivery strategies in the video ecosystem.</p>
<ul>
<li>Real-Time H.265/H.264 (HEVC/AVC) Decoder</li>
<li>Ethernet and USB Interfaces (No WiFi)</li>
<li>HDMI and SDI Video Outputs (Outputs 1080p/30)</li>
<li>Camera Top Form Factor</li>
<li>Built-In Scaler</li>
<li>OLED Display</li>
<li>Powers by AC Adapter or 2-pin Connector Battery</li>
<li>Outfitted for 1/4" Mounting</li>
</ul>
BIT-770
TER-BIT770
Dual AB to V Mount Conversion Plate
Teradek
<ul>
<li>BIT 770 Dual AB to V Mount Conversion Plate</li>
</ul>
LATITUDE Alexa Mini Run | Stop cable - For Latitude MDR
TRT-11-1374
Use to trigger the run/stop function on Alexa Mini Cameras with RS port
Teradek
<ul>
<li>Use to trigger the run/stop function on Alexa Mini Cameras with RS port</li>
<li>Hirose to 7pin</li>
<li>60cm length</li>
</ul>
BIT-822
TER-BIT822
Gold Mount - Male & Female Battery Plate kit for Bolt XT 1000 & 3000 Receivers
Teradek
<ul>
<li>Gold Mount - Male & Female Battery Plate kit for Bolt XT 1000 & 3000 Receivers</li>
</ul>
BIT-823
TER-BIT823
V-Mount - Male & Female Battery Plate kit for Bolt XT 1000 & 3000 Receivers
Teradek
<ul>
<li>V-Mount - Male & Female Battery Plate kit for Bolt XT 1000 & 3000 Receivers</li>
</ul>
BIT-811
TER-BIT811
Gold Mount Single Battery Plate 14.4V for Bolt XT/LT
Teradek
<ul>
<li>Gold Mount Single Battery Plate 14.4V for Bolt XT/LT</li>
</ul>
BIT-812
TER-BIT812
Single V Mount Batt Plate 14.4V for 500XT, Sidekick XT and LT Receivers
Teradek
<ul>
<li>Single V Mount Batt Plate 14.4V for 500XT, Sidekick XT and LT Receivers</li>
</ul>
Protective Case for Beam
TER-BEAMCASE
Protective SKB Case For Teradek Beam
Teradek
<ul>
<li>Protective SKB Case Teradek Beam</li>
<li>Fits an Antenna Array, 1 Beam TX and up to 3 Beam RX</li>
<li>SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin</li>
<li>Water and dust tight</li>
<li>resistant to corrosion and impact damage</li>
<li>Features a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, resistance to UV, solvents, corrosion, fungus and impact damage</li>
</ul>
<h4>Specifications</h4>
<ul>
<li><strong>Lid Depth:</strong> 2.00 in / 5.08 cm</li>
<li><strong>Base Depth:</strong> 6.00 in / 15.24 cm</li>
<li><strong>Interior Length:</strong> 22.00 in / 55.88 cm</li>
<li><strong>Interior Width:</strong> 17.00 in / 43.18 cm</li>
<li><strong>Interior Depth:</strong> 8.00 in / 20.32 cm</li>
<li><strong>Interior Cu. Volume:</strong> 1.73 cu ft / 0.05 cu m</li>
<li><strong>Exterior Length:</strong> 24.32 in / 61.77 cm</li>
<li><strong>Exterior Width:</strong> 19.50 in / 49.53 cm</li>
<li><strong>Exterior Depth:</strong> 8.86 in / 22.50 cm</li>
<li><strong>Exterior Cu. Volume:</strong> 2.43 cu ft / 0.07 cu m</li>
<li><strong>Max. Temperature:</strong> 180.00° F / 82.22° C</li>
<li><strong>Min. Temperature:</strong> -69.00° F -56.11° C</li>
<li><strong>Max. Buoyancy:</strong> 109.00 lb / 50.00 kg</li>
<li><strong>Carton Length:</strong> 23.75 in / 60.33 cm</li>
<li><strong>Carton Width:</strong> 19.63 in / 49.85 cm</li>
<li><strong>Carton Depth:</strong> 9.00 in / 22.86 cm</li>
<li><strong>Carton Cu. Volume:</strong> 2.43 cu ft / 0.07 cu m</li>
<li><strong>Product Weight:</strong> 10.95 lb / 4.97 kg</li>
<li><strong>Shipping Weight:</strong> 13.00 lb / 5.90 kg</li>
</ul>
Beam Antenna
TER-BEAMANT
Replacement Antenna for Teradek Beam (1 single antenna)
Teradek
<ul>
<li>Replacement Wireless Antenna for Beam</li>
</ul>
Bolt 500 DSMC2
TER-BOLT-0939
Bolt 500 DSMC2 Wireless TX
Teradek
<p>Featuring the same zero-delay wireless video of the renowned Bolt line, Bolt DSMC2 is designed to keep camera setups clean and free of cable clutter. By attaching directly to RED cameras, Bolt DSMC2 removes the need for an additional video cable, power cable, and accessories like camera arms while providing pristine, real-time wireless monitoring. The Bolt DSMC2 is available in three different ranges, 500, 1000 and 3000 ft. Cleaner setups gives camera departments more compactness and mobility, allowing operators to focus on capturing the best shots.</p>
<p>Bolt DSMC2 integrates perfectly with the existing Bolt ecosystem. The modules are compatible with Bolt 500/1000/3000, XT and LT systems, along with a wide variety of unique receiver solutions like SmallHD's 703 Bolt, ultra-long range Bolt 10K, and the universal Bolt Sidekick series.</p>
<ul>
<li>Zero-delay 1080p wireless video</li>
<li>Compatible with Bolt 500, 1000, 3000, XT & LT receivers</li>
<li>HDMI Output</li>
<li>Secures seamlessly onto DSMC2 cameras</li>
<li>Supports up to 4x Bolt receivers</li>
<li>Available as 500, 1000 and 3000 ft. models</li>
</ul>
Bolt 1000 DSMC2
TER-BOLT-0968
Bolt 1000 DSMC2 Wireless TX
Teradek
<p>Featuring the same zero-delay wireless video of the renowned Bolt line, Bolt DSMC2 is designed to keep camera setups clean and free of cable clutter. By attaching directly to RED cameras, Bolt DSMC2 removes the need for an additional video cable, power cable, and accessories like camera arms while providing pristine, real-time wireless monitoring. The Bolt DSMC2 is available in three different ranges, 500, 1000 and 3000 ft. Cleaner setups gives camera departments more compactness and mobility, allowing operators to focus on capturing the best shots.</p>
<p>Bolt DSMC2 integrates perfectly with the existing Bolt ecosystem. The modules are compatible with Bolt 500/1000/3000, XT and LT systems, along with a wide variety of unique receiver solutions like SmallHD's 703 Bolt, ultra-long range Bolt 10K, and the universal Bolt Sidekick series.</p>
<ul>
<li>Zero-delay 1080p wireless video</li>
<li>Compatible with Bolt 500, 1000, 3000, XT & LT receivers</li>
<li>HDMI Output</li>
<li>Secures seamlessly onto DSMC2 cameras</li>
<li>Supports up to 4x Bolt receivers</li>
<li>Available as 500, 1000 and 3000 ft. models</li>
</ul>
Bolt 3000 DSMC2
TER-BOLT-0998
Bolt 3000 DSMC2 Wireless TX
Teradek
<p>Featuring the same zero-delay wireless video of the renowned Bolt line, Bolt DSMC2 is designed to keep camera setups clean and free of cable clutter. By attaching directly to RED cameras, Bolt DSMC2 removes the need for an additional video cable, power cable, and accessories like camera arms while providing pristine, real-time wireless monitoring. The Bolt DSMC2 is available in three different ranges, 500, 1000 and 3000 ft. Cleaner setups gives camera departments more compactness and mobility, allowing operators to focus on capturing the best shots.</p>
<p>Bolt DSMC2 integrates perfectly with the existing Bolt ecosystem. The modules are compatible with Bolt 500/1000/3000, XT and LT systems, along with a wide variety of unique receiver solutions like SmallHD's 703 Bolt, ultra-long range Bolt 10K, and the universal Bolt Sidekick series.</p>
<ul>
<li>Zero-delay 1080p wireless video</li>
<li>Compatible with Bolt 500, 1000, 3000, XT & LT receivers</li>
<li>HDMI Output</li>
<li>Secures seamlessly onto DSMC2 cameras</li>
<li>Supports up to 4x Bolt receivers</li>
<li>Available as 500, 1000 and 3000 ft. models</li>
</ul>
ACI
TRT-10-1322
Assistant Camera Interface No Radios
Teradek
<p>The ACI module simplifies camera control and management by combining a smartly-designed software UI with physical controls. The hardware attaches seamlessly to the side of RED DSMC2 cameras and can operate with any DSMC2 I/O module with a CRTL (RS232) port.</p>
<ul>
<li>Base ACI module</li>
<li>Menu and jog wheel controls</li>
<li>Attaches seamlessly to assistant side of RED DSMC2 cameras</li>
<li>For ACs and operators who only need on-camera functionality</li>
</ul>
<h4>Specifications:</h4>
<ul>
<li>Intuitive User Interface</li>
<li>Full RCP Control</li>
<li>On-Camera Mounting</li>
</ul>
MDR.ACI
TRT-10-1320
Assistant Camera Interface RT radio & BLE Motor (Lemos are included)
Teradek
<ul>
<li>ACI module with built-in 2.4 GHz FHSS radio and 3-channel Teradek RT lens control receiver.</li>
<li>Up to 5000 ft. of wireless range.</li>
<li>Can be used as a remote for adjusting camera parameters wirelessly.</li>
<li>Requires pairing with an on-camera RF.ACI, MDR.ACI or any Teradek RT receiver.</li>
<li>Combine with a Teradek RT controller and motors for an all-in-one premium lens and camera control solution.</li>
</ul>
<h4>Specifications</h4>
<ul>
<li>Intuitive User Interface</li>
<li>Full RCP Control</li>
<li>On-Camera Mounting</li>
<li>Off Camera Remote Control</li>
<li>2.4GHz Wireless Radio</li>
<li>Wireless Range: 5000 ft</li>
<li>RF.ACI Remote Compatible</li>
<li>Integrated Teradek RT MDR</li>
</ul>
CTRL.1
TRT-15-0043
Single Axis Wireless Lens Controller
Teradek
<p>The CTRL.1 is a single-axis handheld controller for precision wireless lens control. Part of the Teradek RT ecosystem, CTRL.1 allows for either focus, iris or zoom control, is compatible with all Teradek RT motors & receiver and will work simultaneously with other RT Units controlling the other axes on the same lens.</p>
<p>CTRL.1 introduces low-latency information overlays showing lens data on SmallHD monitors. Lens mapping and overlaying is an upgrade that can be added on at any time for an additional price. Available in metric and imperial units.</p>
<h4>Ergonomic Lightweight Design</h4>
<p>The controller features a large focus knob, flexible mounting options and an OLED display for critical lens data. Its lightweight ergonomic design makes it extremely easy to take anywhere, and a removable Canon LP-E6 battery offers up to 36 hours of continuous use.</p>
<h4>Lens Mapping</h4>
<p>CTRL.1 introduces built-in lens mapping, which allows for auto-calibrating lenses to pre-marked focus rings and accessing configurations at any time with the touch of a button. Pre-marked rings cover multiple lenses, saving time on set from manually calibrating after every lens swap.</p>
<ul>
<li>Single Axis wireless lens controller</li>
<li>Wireless control of focus, iris or zoom</li>
<li>Operate at up to 5,000 ft. of wireless range</li>
<li>Compatible with Teradek RT motors & receivers</li>
<li>Built-in OLED with intuitive menu system.</li>
<li>Supports lens mapping for precision focus pulling.</li>
<li>Lens mapping allows for auto-calibrating lenses to pre-marked focus rings and accessing configurations at any time with the touch of a button</li>
</ul>
<ul>
<li>1 x Controller Neckstrap (11-1443)</li>
<li>1 x CTRL.1 - Single Axis Wireless Lens Controller</li>
<li>1 x Mini-USB (5pin) to USB - 18in Cable (Firmware Cable)</li>
</ul>
MOTR.X
TRT-15-0044
Superspeed Lens Motor with Loopthrough
Teradek
<p>MOTR.X operates with lightning-fast speed and incredible torque while remaining totally silent. The brushless motor has 6x the service life of brushed motors and includes a quick-release rod-mount and a rapid tool-less gear swap mechanism. Additionally, new in/out motor ports pass data and power, allowing MOTR.X units to be daisy-chained from one motor to the next to reduce cable clutter on your rig.</p>
<ul>
<li>More torque for precision lens control</li>
<li>Daisy-chaining from motor to motor</li>
<li>Compatible with all Teradek RT controllers, receivers and lens motors</li>
</ul>
<ul>
<li>1x MOTR.X</li>
<li>1x MK3.1 Motor Bracket - For 19mm and 15mm rods [11-1434]</li>
<li>1x 0.8mod Motor Gear - Cine, ARRI, Zeiss, 32pitch, Sony etc [11-1423]</li>
<li>1x Quickstart Guide - Teradek RT MOTR.X</li>
</ul>
BIT-818
TER-BIT818
Gold Mount Battery Plate (Female) for Bolt XT 1000 / 3000 RX
Teradek
<ul>
<li>Gold Mount Battery Plate (Female) for Bolt XT 1000 / 3000 RX</li>
<li>Allows you to secure a Gold Mount battery directly to a Teradek Bolt 1000/3000 XT receiver to be powered internally</li>
</ul>
BIT-819
TER-BIT819
V-Mount Battery Plate (Female) for Bolt XT 1000 / 3000 RX
Teradek
<ul>
<li>V-Mount Battery Plate (Female) for Bolt XT 1000 / 3000 RX</li>
<li>Allows you to secure a V-Mount battery directly to a Teradek Bolt 1000/3000 XT receiver to be powered internally</li>
</ul>
BIT-810
TER-BIT810
Bolt LT/XT Battery Plate for Sony L Series and Canon LP-E6
Teradek
<ul>
<li>Bolt LT/XT Battery Plate for Sony L Series and Canon LP-E6</li>
</ul>
<h4>Compatible with:</h4>
<ul>
<li>Bolt 1000/3000 XT Transmitters</li>
<li>Bolt 500 XT Transmitters and Receivers</li>
<li>Bolt XT Sidekick</li>
<li>All Bolt LT Models</li>
</ul>
<p><small>Please Note: This battery plate will not work on Bolt 1000 XT or Bolt 3000 XT Receivers.</small></p>
Single-Axis Wireless Lens Control Kit
TRT-15-0045
Complete Teradek RT precision lens control kit
Teradek
<h4>CTRL.1</h4>
<p>The CTRL.1 is a single-axis handheld controller for precision wireless lens control. Part of the Teradek RT ecosystem, CTRL.1 allows for either focus, iris or zoom control, is compatible with all Teradek RT motors & receiver and will work simultaneously with other RT Units controlling the other axes on the same lens.</p>
<p>CTRL.1 introduces low-latency information overlays showing lens data on SmallHD monitors. Lens mapping and overlaying is an upgrade that can be added on at any time for an additional price. Available in metric and imperial units.</p>
<h4>Latitude MDR-M</h4>
<p>The Latitude M is a 2-axis receiver for focus, iris and/or zoom with an operation range of up to 5000 ft. Its ultra-lightweight design allows it to mount seamlessly to any camera setup, and the built-in 2.4 GHz FHSS radio can cut through the toughest of RF conditions. Latitude M receivers also feature direct integration with RED DSMC & DSMC2 cameras for controlling EF/AF lens/iris with the camera’s internal motors, shutter, ISO, button features (2x magnification, edge, focus assist).</p>
<h4>MK3.1 Motor</h4>
<p>Teradek RT MK3.1 brushless motors operate smoothly and quietly, with high torque for the most demanding of modern cinematic workflows. Motors feature interchangeable gears that can be mounted on either side of the motor, and height-adjustable 15mm & 19mm rod brackets for seamless mounting on any camera system.</p>
<p>The Single-Axis Lens Control Kit contains everything you need to get started with wireless lens control. It includes a single-axis CTRL.1 hand unit for precision focus pulling, a 2-channel Latitude MDR-M receiver, and a MK3.1 motor with additional accessories.</p>
<ul>
<li>Complete Teradek RT precision lens control kit</li>
<li>Wireless control focus, iris or zoom with up to 5,000 ft. of range</li>
<li>Supports lens mapping for precision focus pulling.</li>
</ul>
<ul>
<li>1 x Controller Neck-strap [11-1443]</li>
<li>1 x LP-E6 Duracell Battery [14-0014-1]</li>
<li>1 x LP-E6 Travel charger [14-0015]</li>
<li>1 x Receiver rod clamp [11-1439]</li>
<li>5 x Additional White discs (Type B) note: 1 white disc preinstalled on CTRL.1</li>
<li>1 x Latitude-M Receiver [15-0008]</li>
<li>1 x Lens Motor, 15/19mm rod motor bracket, 0.8 lens gear [15-0025]</li>
<li>1 x CTRL.1 Single-Axis Controller [15-0043]</li>
<li>1 x Mini-USB (5pin) to USB - 18 in Cable (Firmware)</li>
<li>1 x Latitude DTAP Power Cable [11-1378]</li>
<li>1 x Latitude Motor Cable 40cm Right Angle-Right Angle [11-1389]</li>
<li>1 x 6.5 ft (2m) Controller Wired Mode Cable 5-pin to 5-pin [11-1413]</li>
<li>1 x Teradek Case Large - Black with RT Motion Single Channel Controller Set Foam [28-0068-7]</li>
</ul>
Lens Mapping and Firmware Update for CTRL.1
TRT-11-1458-M
Lens Mapping & SmallHD Integration Upgrade for CTRL.1 - Metric
Teradek
<ul>
<li>Auto-calibrate lenses to pre-marked focus rings</li>
<li>Save time on set from manually calibrating after every lens swap</li>
<li>Note: This uses Metric measurements on rings. There is an Imperial version available.</li>
</ul>
<h4>Ring Measurements</h4>
<ul>
<li>1 x Teradek RT Pre-Marked focus Ring - 0.25m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 0.5m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 1m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 2m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 3m minimum focus</li>
<li>1 x Teradek RT Pre-Marked Iris Ring - 1-32</li>
</ul>
<h4>Lens Mapping</h4>
<p>CTRL.1 introduces built-in lens mapping, which allows for auto-calibrating lenses to pre-marked focus rings and accessing configurations at any time with the touch of a button. Pre-marked rings cover multiple lenses, saving time on set from manually calibrating after every lens swap.</p>
<ul>
<li>1 x Teradek RT Pre-Marked focus Ring - 0.25m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 0.5m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 1m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 2m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 3m minimum focus</li>
<li>1 x Teradek RT Pre-Marked Iris Ring - 1-32</li>
<li>1 x Firmware License Key Card for TeradekRT With License Key</li>
</ul>
Lens Mapping and Firmware Update for CTRL.1
TRT-11-1458-I
Lens Mapping & SmallHD Integration Upgrade for CTRL.1 - Imperial
Teradek
<ul>
<li>Auto-calibrate lenses to pre-marked focus rings</li>
<li>Save time on set from manually calibrating after every lens swap</li>
<li>Note: This uses Imperial measurements on rings. There is a metric version available.</li>
</ul>
<h4>Ring Measurements</h4>
<ul>
<li>1 x Pre-Marked Focus Ring - 10" minimum focus</li>
<li>1 x Pre-Marked Focus Ring - 20" minimum focus</li>
<li>1 x Pre-Marked Focus Ring - 3'6" minimum focus</li>
<li>1 x Pre-Marked Focus Ring - 6' minimum focus</li>
<li>1 x Pre-Marked Focus Ring - 10' minimum focus</li>
<li>1 x Pre-Marked Iris Ring - 1-32</li>
</ul>
<h4>Lens Mapping</h4>
<p>CTRL.1 introduces built-in lens mapping, which allows for auto-calibrating lenses to pre-marked focus rings and accessing configurations at any time with the touch of a button. Pre-marked rings cover multiple lenses, saving time on set from manually calibrating after every lens swap.</p>
<ul>
<li>1 x Teradek RT Pre-Marked focus Ring - 10" minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 20" minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 3'6" minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 6' minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 10' minimum focus</li>
<li>1 x Teradek RT Pre-Marked Iris Ring - 1-32</li>
<li>1 x Firmware License Key Card for TeradekRT With License Key</li>
</ul>
Antenna Extension Kit
TER-11-1296
Antenna Extension Kit for Bolt TX
Teradek
<ul>
<li>Antenna Extension Kit for Bolt TX</li>
<li>This tool allows you to efficiently mount your transmitter on camera without having to compromise proper antenna placement</li>
<li>Features a threaded 1/4"-20 screw holes as well as two 1/4"-20 pass through slots</li>
<li>Each kit comes with two lengths of extension cables</li>
<li>Compatible with all Paralinx and Teradek transmitters that feature external antennas</li>
</ul>
<ul>
<li>1 x Antenna Adapter</li>
<li>1 x 1/4"-20 Mounting Screw</li>
<li>1 x Length of Spiral Wrap</li>
<li>2 x 18" (46cm) RP-SMA Male to RP-SMA Female Extension Cable</li>
<li>2 x 36" (91cm) RP-SMA Male to RP-SMA Female Extension Cable</li>
</ul>
Bolt 3000 XT Transceiver Set / Bolt 10K Deluxe Kit V Mount
TER-BOLT-999XT-1V
Bolt 3000 XT TX / RX Set and Bolt 10K RX HD-SDI/HDMI Kit - V-Mount
Teradek
<p>A very long range (10,000 ft.) receiver, Bolt 10K comes complete with accessories and Protective SKB Case. With a fully integrated panel antenna and battery plate, Teradek Bolt 10K has 3G-SDI and HDMI outputs and works alongside Bolt 3000 XT, 703 Bolt, and Sidekick II receivers. Available standalone and with a 3000 XT Transceiver in a kit. Gold Mount or V-Mount battery options.</p>
<p>It is compatible with Bolt 3000 transmitters and functions seamlessly alongside 3000 XT receivers, Sidekick II, and the 703 Bolt. Bolt 10K receivers support 1080p60 4:2:2 video and with a newly-designed chassis, hassle-free Tx/Rx pairing, robust range and visually lossless HD quality make this an exceptional performer. </p>
<h4>Bolt XT 3000</h4>
<ul>
<li>Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt</li>
<li>Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection</li>
<li>Dual input and output (SDI + HDMI) and SDI loop on the TX</li>
<li>1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power</li>
</ul>
<h4>BOLT 10K</h4>
<ul>
<li>HD-SDI/HDMI Wireless RX</li>
<li>Gives drone operators and cinematographers a pristine zero delay wireless video feed up to 10,000 ft. line of sight.</li>
<li>Super long range (10,000 ft.) receiver for Bolt 3000 TX</li>
<li>Built-in Gold or V-mount battery plate</li>
<li>SDI and HDMI outputs</li>
</ul>
Latitude MoVI Pro Cable - 40cm
TRT-11-1393
Latitude MoVI Pro Cable (40cm)
Teradek
<ul>
<li>40cm Latitude MoVI Pro Cable</li>
</ul>
BIT-719
TER-BIT719
2-pin Lemo to 2-pin Lemo (Approx 45cm)
Teradek
<ul>
<li>2-pin Lemo to 2-pin Lemo (Approx 45cm)</li>
</ul>
BIT-768
TER-BIT768
Dual V Mount Plate for Bolt Sidekick
Teradek
<ul>
<li>Dual V Mount Plate for Bolt Sidekick</li>
</ul>
Smart Knob Bracket
TRT-11-1437
Smart Knob Bracket for 15 / 19mm Rods
Teradek
<ul>
<li>Smart Knob Bracket for 15 / 19mm Rods</li>
</ul>
Slave Controller Cable 100cm (r/a to r/a)
TRT-11-1402
Slave Controller Cable 100cm (Right Angle to Right Angle)
Teradek
<ul>
<li>Slave Controller Cable 100cm (Right Angle to Right Angle) </li>
</ul>
Slave Controller Cable 100cm (Straight)
TRT-11-1403
Slave Controller Cable 100cm - Straight
Teradek
<ul>
<li>Slave Controller Cable 100cm - Straight</li>
</ul>
MDR-SK Backplate
TRT-11-1426
MDR-SK Backplate to Convert Latitude into a Universal Receiver
Teradek
<ul>
<li>MDR-SK Backplate to Convert Latitude into a Universal Receiver</li>
</ul>
NIBL-118
TER-NIBL118
Barrel to Power Tap Cable 18 inch
Teradek
<ul>
<li>Barrel to Power Tap Cable 18 inch</li>
</ul>
BIT-078
TER-BIT078
Type D Micro HDMI Male to Type C Mini HDMI Male - 30cm Cable
Teradek
<ul>
<li>Type D Micro HDMI Male to Type C Mini HDMI Male - 30cm Cable</li>
</ul>
CTRL.3
TRT-15-0047-I
Three-Axis Wireless Lens Controller - Teradek RT Single-Channel Hand Controller / Imperial (inches)
Teradek
<p>CTRL.3 is a feature-rich, powerful 3-axis wireless controller with built-in lens mapping and data storage. Paired with any SmallHD monitor running OS3, CTRL.3 displays critical lens data as overlays directly on the monitor, allowing camera assistants to pull focus and keep eyes on the image.</p>
<h4>Ergonomic Lightweight Design</h4>
<p>The controller features a large focus knob, flexible mounting options and an OLED display for critical lens data. Its lightweight ergonomic design makes it extremely easy to take anywhere, and a removable Canon LP-E6 battery offers up to 36 hours of continuous use.</p>
<h4>Lens Mapping</h4>
<p>CTRL.3 includes built-in lens mapping, which allows for auto-calibrating lenses to pre-marked focus rings and accessing configurations at any time with the touch of a button. Pre-marked rings cover multiple lenses, saving time on set from manually calibrating after every lens swap.</p>
<p>Pre-marked rings come in Imperial or Metric units.</p>
<h4>SmallHD Overlays</h4>
<p>CTRL.3 includes the lens data overlays on SmallHD monitors running OS3. Get critical follow focus information directly on your monitor including lens focal distance, focal length, iris, zoom and more.</p>
<h4>Teradek RT App</h4>
<p>Manage, update and configure every piece of your Teradek RT system with the Teradek RT App for iOS. Create lens maps, configure FIZ settings, perform basic camera controls, update firmware and much more all from the convenience of your smartphone or tablet.</p>
<ul>
<li>3-axis wireless lens controller for Focus Iris and Zoom</li>
<li>Real-time lens data overlays on SmallHD monitors</li>
<li>Create lens tables and map to pre-marked rings</li>
<li>5000 ft. wireless range</li>
<li>Built-in Bluetooth for use w/ iOS app - manage settings and share lens maps quickly</li>
<li>Integrated rosette for custom monitor mounting bracket</li>
</ul>
<ul>
<li>1 x CTRL.3 Three-Axis Handcontroller</li>
<li>5 x White Disc Type B [11-1459]</li>
<li>1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>1 x SmallHD Monitor Interface Cable 5pin conn to USB Micro_0.4</li>
<li>1 x Teradek Case Large - Black with RT Motion 3 motor</li>
<li>1 x Pre-Marked focus Ring - 10" minimum focus</li>
<li>1 x Pre-Marked focus Ring - 20" minimum focus</li>
<li>1 x Pre-Marked focus Ring - 3'6" minimum focus</li>
<li>1 x Pre-Marked focus Ring - 6' minimum focus</li>
<li>1 x Pre-Marked focus Ring - 10' minimum focus</li>
<li>1 x Pre-Marked Iris Ring - 1-32</li>
<li>1 x Iris Strip Slider 0 (1-22)</li>
<li>1 x Iris Strip Slider 10 (1.4-22)</li>
<li>1 x Iris Strip Slider 20 (2-22)</li>
<li>1 x Iris Strip Slider 30 (2.8-22)</li>
</ul>
CTRL.3
TRT-15-0047-M
Three-Axis Wireless Lens Controller - Teradek RT Single-Channel Hand Controller / Metric (mm)
Teradek
<p>CTRL.3 is a feature-rich, powerful 3-axis wireless controller with built-in lens mapping and data storage. Paired with any SmallHD monitor running OS3, CTRL.3 displays critical lens data as overlays directly on the monitor, allowing camera assistants to pull focus and keep eyes on the image.</p>
<h4>Ergonomic Lightweight Design</h4>
<p>The controller features a large focus knob, flexible mounting options and an OLED display for critical lens data. Its lightweight ergonomic design makes it extremely easy to take anywhere, and a removable Canon LP-E6 battery offers up to 36 hours of continuous use.</p>
<h4>Lens Mapping</h4>
<p>CTRL.3 includes built-in lens mapping, which allows for auto-calibrating lenses to pre-marked focus rings and accessing configurations at any time with the touch of a button. Pre-marked rings cover multiple lenses, saving time on set from manually calibrating after every lens swap.</p>
<p>Pre-marked rings come in Imperial or Metric units.</p>
<h4>SmallHD Overlays</h4>
<p>CTRL.3 includes the lens data overlays on SmallHD monitors running OS3. Get critical follow focus information directly on your monitor including lens focal distance, focal length, iris, zoom and more.</p>
<h4>Teradek RT App</h4>
<p>Manage, update and configure every piece of your Teradek RT system with the Teradek RT App for iOS. Create lens maps, configure FIZ settings, perform basic camera controls, update firmware and much more all from the convenience of your smartphone or tablet.</p>
<ul>
<li>3-axis wireless lens controller for Focus Iris and Zoom</li>
<li>Real-time lens data overlays on SmallHD monitors</li>
<li>Create lens tables and map to pre-marked rings</li>
<li>5000 ft. wireless range</li>
<li>Built-in Bluetooth for use w/ iOS app - manage settings and share lens maps quickly</li>
<li>Integrated rosette for custom monitor mounting bracket</li>
</ul>
<ul>
<li>1 x CTRL.3 Three-Axis Handcontroller</li>
<li>5 x White Disc Type B [11-1459]</li>
<li>1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>1 x SmallHD Monitor Interface Cable 5pin conn to USB Micro_0.4</li>
<li>1 x Teradek Case Large - Black with RT Motion 3 motor</li>
<li>1 x Pre-Marked focus Ring - 10" minimum focus</li>
<li>1 x Pre-Marked focus Ring - 20" minimum focus</li>
<li>1 x Pre-Marked focus Ring - 3'6" minimum focus</li>
<li>1 x Pre-Marked focus Ring - 6' minimum focus</li>
<li>1 x Pre-Marked focus Ring - 10' minimum focus</li>
<li>1 x Pre-Marked Iris Ring - 1-32</li>
<li>1 x Iris Strip Slider 0 (1-22)</li>
<li>1 x Iris Strip Slider 10 (1.4-22)</li>
<li>1 x Iris Strip Slider 20 (2-22)</li>
<li>1 x Iris Strip Slider 30 (2.8-22)</li>
</ul>
MDR.X
TRT-15-0010
Three-Channel Lens Control Receiver with Bluetooth
Teradek
<p>MDR.X is an ultra-lightweight, 3-axis receiver for any industry standard camera. MDR.X features full focus/iris/zoom support, integrated RED camera control, and an OLED display for lens information.</p>
<h4>Multiple Inputs/Outputs</h4>
<ul>
<li>3x Motor ports for Focus Iris Zoom.</li>
<li>2x Auxiliary inputs for wired control (via Teradek RT thumbwheel/zoomrocker).</li>
<li>1x Cam output for RED DSMC2 camera control.</li>
</ul>
<h4>Compact & Lightweight</h4>
<p>At just 140g, MDR.X is the lightest and most high-tech receiver in the follow focus world. Small form factor makes it perfect for all camera setups, especially those on gimbals, handhelds, cranes, drones and other movement rigs.</p>
<h4>On-Unit OLED Display</h4>
<p>Each receiver includes an on-unit OLED display with push buttons for configuring motor axes. Also see status readouts including wireless channels, battery voltage and more.</p>
<h4>Teradek RT App</h4>
<p>Manage, update and configure every piece of your Teradek RT system with the Teradek RT App for iOS. Create lens maps, configure FIZ settings, perform basic camera controls, update firmware and much more all from the convenience of your smartphone or tablet.</p>
<ul>
<li>3-axis receiver for focus, iris, zoom</li>
<li>Ultra lightweight 140g</li>
<li>On-unit OLED display</li>
<li>Bluetooth for remote access via Teradek RT App for iOS</li>
</ul>
CTRL.3 Motor Wireless Lens Control Kit (1-Motor)
TRT-15-0047-ONE
1 Axis Lens Control Kit (MDR.X)
Teradek
<ul>
<li>1-axis lens control set</li>
<li>Wireless control of focus, iris or zoom with up to 5,000 ft. of range.</li>
<li>Includes lens mapping with pre-marked rings.</li>
<li>Lens data overlays on SmallHD monitors running OS3.</li>
</ul>
<ul>
<li>1x Controller Neckstrap</li>
<li>2x LP-E6 Duracell 1600mAh Li-ion Battery</li>
<li>1x LP-E6 Battery Charger</li>
<li>1x Receiver Rail Clamp for 15/19mm rods (Assembly)</li>
<li>5x White Disc Type B</li>
<li>1x RT-CTRL Iris Strip Slider 0</li>
<li>1x RT-CTRL Iris Strip Slider 10</li>
<li>1x RT-CTRL Iris Strip Slider 20</li>
<li>1x RT-CTRL Iris Strip Slider 30</li>
<li>1x MDR.X</li>
<li>1x MOTR.X</li>
<li>1x Teradek RT Pre-Marked focus Ring - 0.25m minimum focus</li>
<li>1x Teradek RT Pre-Marked focus Ring - 0.5m minimum focus</li>
<li>1x Teradek RT Pre-Marked focus Ring - 1m minimum focus</li>
<li>1x Teradek RT Pre-Marked focus Ring - 2m minimum focus</li>
<li>1x Teradek RT Pre-Marked focus Ring - 3m minimum focus</li>
<li>1x Teradek RT Pre-Marked focus Ring - 10in minimum focus</li>
<li>1x Teradek RT Pre-Marked focus Ring - 20in minimum focus</li>
<li>1x Teradek RT Pre-Marked focus Ring - 3ft, 6in minimum focus</li>
<li>1x Teradek RT Pre-Marked focus Ring - 6ft minimum focus</li>
<li>1x Teradek RT Pre-Marked focus Ring - 10ft minimum focus</li>
<li>1x Teradek RT Pre-Marked Iris Ring - 1-32</li>
<li>1x Teradek RT CTRL.3</li>
<li>1x Teradek RT Monitor Bracket for Hand Controllers</li>
<li>2x 2pin Conn. to 2pin Conn. (Alexa) 18in Cable</li>
<li>1x Teradek RT Motor Cable - ST to ST (0.2m / 8in)</li>
<li>1x Teradek RT Motor Cable - Straight to Straight (0.4m / 16in)</li>
<li>1x Teradek RT Motor Cable - Straight to Straight (60cm / 24in)</li>
<li>1x MDR.X ARRI R/S Cable</li>
<li>1x MDR.X Sony F55 R/S Cable</li>
<li>1x MDR.X Sony F55 R/S Cable</li>
<li>1x MDR.X RED CTRL Cable - 40cm</li>
<li>1x SmallHD Monitor Interface Cable - 5pin to USB Micro (0.4m)</li>
<li>1x SmallHD Monitor Interface Cable - 5pin to 703 Bolt 5pin 0.25m</li>
<li>1x SmallHD Monitor Interface Cable - 5pin to USB Type A (1m)</li>
<li>1x Teradek Case XLarge - Black with RT Motion CTL3 Controller Set Foam</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Quickstart Guide - Teradek RT CTRL.3</li>
</ul>
CTRL.3 Motor Wireless Lens Control Deluxe Kit (3-Motors)
TRT-15-0047-3
Complete 3-Axis Lens Control Kit
Teradek
<p>The CTRL.3 Deluxe Kit includes everything you need to be fully equipped for your next production. It includes a MDR.X receiver, three MOTR.X motors and a CTRL.3 with lens mapping and lens data overlays on SmallHD monitors. Also includes pre-marked focus/iris rings in both Imperial & Metric units.</p>
<h4>CTRL.3</h4>
<p>CTRL.3 is a feature-rich, powerful 3-axis wireless controller with built-in lens mapping and data storage. Paired with any SmallHD monitor running OS3, CTRL.3 displays critical lens data as overlays directly on the monitor, allowing camera assistants to pull focus and keep eyes on the image.</p>
<h4>MDR.X</h4>
<p>MDR.X is an ultra-lightweight, 3-axis receiver for any industry standard camera. MDR.X features full focus/iris/zoom support, integrated RED camera control, and an OLED display for lens information.</p>
<h4>MOTR.X</h4>
<p>The MOTR.X offers superior speed and responsiveness for any camera lens. Motors feature in/out motor ports for data and power, allowing motors to be daisy-chained to reduce cable clutter. Motors also feature a selection button and indicator lights for focus/iris/zoom.</p>
<h4>Lens Mapping</h4>
<p>CTRL.3 includes built-in lens mapping, which allows for auto-calibrating lenses to pre-marked focus rings and accessing configurations at any time with the touch of a button. Pre-marked rings cover multiple lenses, saving time on set from manually calibrating after every lens swap.</p>
<p>Pre-marked rings come in Imperial or Metric units.</p>
<h4>SmallHD Overlays</h4>
<p>CTRL.3 includes the lens data overlays on SmallHD monitors running OS3. Get critical follow focus information directly on your monitor including lens focal distance, focal length, iris, zoom and more.</p>
<h4>Teradek RT App</h4>
<p>Manage, update and configure every piece of your Teradek RT system via Bluetooth with the Teradek RT App for iOS. Create lens maps, configure FIZ settings, perform basic camera controls, update firmware and much more all from the convenience of your smartphone or tablet.</p>
<ul>
<li>Complete 3-axis lens control kit.</li>
<li>Wireless control of focus, iris or zoom with up to 5,000 ft. of range.</li>
<li>Includes lens mapping with pre-marked rings.</li>
<li>Lens data overlays on SmallHD monitors running OS3.</li>
</ul>
<ul data-bind="foreach: list_item.details">
<li><span data-bind="text: $data">CTRL.3 Three-Axis Handcontroller</span></li>
<li><span data-bind="text: $data">Teradek RT Quick-release Motor Extension Rod Clamp</span></li>
<li><span data-bind="text: $data">Teradek RT Monitor Bracket for Hand controllers</span></li>
<li><span data-bind="text: $data">MDR-X ARRI R/S</span></li>
<li><span data-bind="text: $data">MDR-X RED CTRL</span></li>
<li><span data-bind="text: $data">MDR-X Sony F55 R/S</span></li>
<li><span data-bind="text: $data">MDR.X Cinetape cable</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked focus Ring - 10" minimum focus Assy</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked focus Ring - 20" minimum focus Assy</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked focus Ring - 3'6" minimum focus Assy</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked focus Ring - 6' minimum focus Assy</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked focus Ring - 10' minimum focus Assy</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked focus Ring - 0.25m minimum focus Assy</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked focus Ring - 0.5m minimum focus Assy</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked focus Ring - 1m minimum focus Assy</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked focus Ring - 2m minimum focus Assy</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked focus Ring - 3m minimum focus Assy</span></li>
<li><span data-bind="text: $data">Teradek RT Pre-Marked Iris Ring - 1-32 Assy</span></li>
<li><span data-bind="text: $data">Controller Neckstrap</span></li>
<li><span data-bind="text: $data">LP-E6 Duracell 1600mAh Li-ion Battery</span></li>
<li><span data-bind="text: $data">LP-E6 Battery Charger</span></li>
<li><span data-bind="text: $data">Receiver Rail Clamp for 15/19mm rods (Assembly)</span></li>
<li><span data-bind="text: $data">White Disc Type B</span></li>
<li><span data-bind="text: $data">Teradek RT MDR.X 3-Axis Lens Control Receiver w/ Bluetooth</span></li>
<li><span data-bind="text: $data">MOTR.X</span></li>
<li><span data-bind="text: $data">Mini-USB (5pin) to USB - 18in Cable (Firmware Cable)</span></li>
<li><span data-bind="text: $data">2pin to Dtap (18in)</span></li>
<li><span data-bind="text: $data">2pin to 2pin (18in)</span></li>
<li><span data-bind="text: $data">Teradek RT Motor Cable - Straight to Straight (60cm / 24in)</span></li>
<li><span data-bind="text: $data">Teradek RT Motor Cable - Straight to Straight (20cm / 8in)</span></li>
<li><span data-bind="text: $data">Teradek RT Motor Cable - Straight to Straight (40cm / 16in)</span></li>
<li><span data-bind="text: $data">5pin conn to SmallHD Monitor</span></li>
<li><span data-bind="text: $data">5pin conn to USB-A_1.0m</span></li>
<li><span data-bind="text: $data">5pin conn to USB Micro_0.4m</span></li>
<li><span data-bind="text: $data">Teradek Case Extra Large - Black with RT Motion 3 motor</span></li>
<li><span data-bind="text: $data">Teradek Vinyl Zipper Bag 250x150mm</span></li>
<li><span data-bind="text: $data">Quickstart Guide - Teradek RT CTRL.3 KIT</span></li>
</ul>
Bolt 4K 1500 Transceiver Set
TER-10-2110
Bolt 4K 1500 12G-SDI/HDMI Wireless TX/RX - Range 1500ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 1500 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 750 Transceiver Set
TER-10-2100
Bolt 4K 750 12G-SDI/HDMI Wireless TX/RX - Range 750ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 750 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 750 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 750 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Ace 500
TER-ACE-500
Ace 500 HDMI Transmitter/Receiver Set
Teradek
<h4>Zero Delay Wireless Video</h4>
<p>The Teradek Ace 500 is a compact, ultralight wireless video system that delivers uncompressed 1080p60 video at up to 500 ft. with zero delay.</p>
<h4>Uncompromising Reliability</h4>
<p>Ace 500 is designed with the same reliability and performance as the Teradek Bolt line, ensuring you have a continuous video feed when you need it the most.</p>
<h4>Built for Content Creation</h4>
<p>Connect the Ace 500 to any HDMI camera including DSLRs, camcorders, and even action cams like Go Pro.</p>
<h4>Ultralight Maximum Mobility</h4>
<p>What makes Ace unique is its compact and lightweight form factor. The transmitter weighs just 126g while the receiver weighs 146g, making them perfect for gimbals and camera rigs of any size.</p>
<h4>Monitoring for Everyone on Set</h4>
<p>Send video from one transmitter to up to four receivers simultaneously and let your crew monitor every shot as it happens.</p>
<h4>Easy to Power</h4>
<p>Keep your Ace powered with optional battery plates* attached directly to your transmitter and receiver.<br /> <small>*Available in Sony L-Series, BP-U, BP-9 and Canon LP-E6.</small></p>
<h4>Mounting Options</h4>
<p>Ace comes with a single ¼-20” mounting point for mounting camera arms or hot shoes, and two 4-40” points for optional mounting brackets.</p>
<h4>See the Shot With SmallHD</h4>
<p>Pair the Ace with FOCUS monitors for an all-in-one handheld wireless monitoring solution. Ace transmitters can be paired with FOCUS RX, while Ace receivers can be paired with a FOCUS TX.</p>
<ul>
<li>Ace 500 HDMI Transmitter/Receiver Set</li>
<li>1080p60 wireless video, less than 1ms of delay</li>
<li>Up to 500 ft. wireless range</li>
<li>HDMI input/output</li>
<li>Supports up to 4 Ace/Bolt receivers</li>
<li>1x ¼-20” mounting points</li>
</ul>
<ul>
<li>1 x Ace 500 TX</li>
<li>1 x Ace 500 RX</li>
<li>1 x Mini-USB (5pin) to USB - 18in/45cm Cable</li>
<li>1 x P-Tap to R/A Barrel, 18 in Cable</li>
<li>1 x Ultra Thin HDMI Male Type A to HDMI Male Type A 18 Inch</li>
<li>1 x R/A Barrel Power Supply Unit 18W AC Adapter 12VC (International) 6 ft</li>
<li>1 x Quickstart Guide</li>
</ul>
VidiU Go Deluxe Kit
TER-VIDIUGO-DELUXE
VidiU Go Deluxe Kit, includes VidiU Go, 2 Nodes & $500 Core Credits
Teradek
<p>The VidiU Go Deluxe Kit includes everything you need to start streaming at an incredible price point. Go live with 2 Node modems. Also enjoy additional features like remote monitoring, HEVC transcoding, cloud archiving and much more with your included Core subscription.</p>
<h4>Dual Video Inputs</h4>
<p>With HDMI and SDI inputs, VidiU Go seamlessly connects with both consumer and professional cameras, in addition to popular video switchers from Newtek, Roland, vMix, and more.</p>
<h4>Instant Live Streaming</h4>
<p>Sometimes you need to go live in a pinch so we’ve simplified the boot up and configuration process so you can be up and running in no time. Quickly set your streaming parameters from VidiU Go’s web and OLED interface, or pre-configure your device with the free VidiU app for iOS and Android. Once powered on, VidiU Go is ready to stream in under 10 seconds.</p>
<h4>HEVC Compression</h4>
<p>VidiU Go includes both H.264 and HEVC compression, allowing you to choose the technology best suited to your project. HEVC video compression offers the same video quality as H.264 at half the required bandwidth, which makes it perfect for slow Ethernet and WiFi connections or saving on data costs when streaming over cellular networks.</p>
<h4>Stream Over Bonded Networks</h4>
<p>VidiU Go was designed to perform in the most challenging production environments, which is why we’ve included the very same bonding technology found in our high end broadcast systems. Never drop another live broadcast by streaming over the combined bandwidth from Ethernet, WiFi, and up to two 3G / 4G / LTE modems, or use several iPhone and Android smartphones as hotspots for even more bandwidth redundancy.</p>
<h4>Broadcast Quality Modems</h4>
<p>Node is our cutting-edge, broadcast grade 4G / LTE modems that offer 2 to 3 times the performance of carrier-branded modems while fitting seamlessly to the sides of the VidiU Go chassis.</p>
<h4>Core</h4>
<p>Take your VidiU Go to the next level with Core, our cloud-based streaming platform that can help you distribute your content to more viewers and streamline your workflow.</p>
<h4>Stream To Multiple Destinations</h4>
<p>Expand the reach of your content and build a larger audience by streaming to multiple platforms at the same time. With Core, you can stream live on all of your favorite platforms simultaneously, including multiple Facebook pages, Twitch, YouTube, and more.</p>
<h4>Remote Configuration</h4>
<p>We understand that VidiU Go is a critical component of your live broadcast, so we’ve built remote management into the Core platform so your team can configure and prepare the encoder ahead of time from anywhere in the world.</p>
<h4>Stream On The Cutting Edge</h4>
<p>While the RTMP protocol does not yet support HEVC compression, our transcoding engine allows you to take advantage of H.265’s bandwidth savings while ensuring video delivery in the common H.264 format.*</p>
<ul>
<li>VidiU Go Deluxe Kit, includes VidiU Go, 2 Nodes & $500 Core Credits</li>
<li>Video Quality: Up to 1080p60</li>
<li>Internet Inputs: 2x USB modems, Ethernet, and WiFi.</li>
<li>Video Inputs: SDI and HDMI</li>
<li>Compression: AVC/H.264 and HEVC/H.265</li>
<li>Cloud: Core and Sharelink</li>
<li>Includes 2 Node modems for robust 4G LTE Internet.</li>
</ul>
<ul>
<li>2 x VidiU Nodes</li>
<li>2 x Sim Card Adapter</li>
<li>2 x Antenna 2dBi WiFi 2.4/5.8 GHz</li>
<li>1 x Go Core Credit Insert</li>
<li>1 x VidiU Go</li>
<li>1 x Ethernet Cable</li>
<li>1 x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>1 x SDI - BNC to BNC Cable, 10in</li>
<li>1 x Teradek Case Medium - VidiU Go and Nodes</li>
<li>1 x PSU 61W USB-C Power Adapter</li>
<li>4 x Antenna penta straight sma mount</li>
<li>1 x Hotshoe Adapter</li>
</ul>
CTRL.1 Wireless Lens Control Kit with Lens Mapping - Imperial
TRT-15-0046-I
Single-Axis Superspeed Wireless Lens Control Kit with Lens Mapping
Teradek
<h4>Overview</h4>
<p>The Single-Axis Lens Control Kit contains everything you need to get started with wireless lens control. It includes a single-axis CTRL.1 hand unit for precision focus pulling, a 2-channel MDR-M receiver, and a MK3.1 motor with additional accessories.</p>
<h4>CTRL.1</h4>
<p>The CTRL.1 is a single-axis handheld controller for precision wireless lens control. Part of the Teradek RT ecosystem, CTRL.1 allows for either focus, iris or zoom control, is compatible with all Teradek RT motors & receiver and will work simultaneously with other RT Units controlling the other axes on the same lens.</p>
<p>CTRL.1 introduces low-latency information overlays showing lens data on SmallHD monitors. Lens mapping and overlaying is an upgrade that can be added on at any time for an additional price. Available in metric and imperial units.</p>
<h4>MDR-M</h4>
<p>The MDR-M is a 2-axis receiver for focus, iris and/or zoom with an operation range of up to 5000 ft. Its ultra-lightweight design allows it to mount seamlessly to any camera setup, and the built-in 2.4 GHz FHSS radio can cut through the toughest of RF conditions. MDR-M receivers also feature direct integration with RED DSMC & DSMC2 cameras for controlling EF/AF lens/iris with the camera’s internal motors, shutter, ISO, button features (2x magnification, edge, focus assist).</p>
<h4>MOTR.X Motor</h4>
<p>The MOTR.X operates with lightning-fast speed and incredible torque while remaining totally silent. The motor has 6x the service life of brushed motors, 15 and 19mm rod support and interchangeable gears.</p>
<p>Additionally, new in/out motor ports pass data and power, allowing MOTR.X units to be daisy-chained from one motor to the next to reduce cable clutter on your rig.</p>
<h4>Lens Mapping</h4>
<p>CTRL.1 introduces built-in lens mapping, which allows for auto-calibrating lenses to pre-marked focus rings and accessing configurations at any time with the touch of a button. Pre-marked rings cover multiple lenses, saving time on set from manually calibrating after every lens swap.</p>
<h4>SmallHD Overlays</h4>
<p>CTRL.3 and CTRL.1 feature the world’s first lens data overlays on SmallHD monitors running OS3. Get critical follow focus information directly on your monitor including lens focal distance, focal length, iris, zoom and more.</p>
<ul>
<li>CTRL.1 Wireless Lens Control Kit with Lens Mapping - Imperial</li>
<li>Complete Teradek RT precision lens control kit</li>
<li>Wireless control focus, iris or zoom with up to 5,000 ft. of range</li>
<li>Supports lens mapping for precision focus pulling</li>
<li>Lens mapping overlays directly on compatible SmallHD monitors</li>
</ul>
<ul>
<li>1 x Teradek RT Pre-Marked focus Ring - 10" minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 20" minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 3'6" minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 6' minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 10' minimum focus</li>
<li>1 x Teradek RT Pre-Marked Iris Ring - 1-32</li>
<li>1 x Firmware License Key Card for TeradekRT With License Key1 x Controller Neck-strap [11-1443]</li>
<li>1 x LP-E6 1600mAh Li-ion Battery [14-0014-1]</li>
<li>1 x LP-E6 Travel charger [14-0015]</li>
<li>1 x Receiver Rail Clamp for 15/19mm rods [11-1439]</li>
<li>1 x Additional White disc (Type B) note: 1 white disc preinstalled on CTRL.1 [11-1459]</li>
<li>1 x Latitude-M Receiver [15-0008]</li>
<li>1 x MOTR.X Motor, 15/19mm rod motor bracket, 0.8 lens gear [15-0044]</li>
<li>1 x CTRL.1 Single-Axis Controller [15-0043]</li>
<li>1 x Mini-USB (5pin) to USB - 18 in Cable (Firmware) [11-1267]</li>
<li>1 x Latitude DTAP Power Cable [11-1378]</li>
<li>1 x Latitude Motor Cable 16in/40cm Straight to Straight [11-1462]</li>
<li>1 x 5pin conn to USB Micro_0.2m [11-1469]</li>
<li>1 x Teradek Vinyl Zipper Bag 250x150mm [11-0808]</li>
<li>1 x 6.5 ft (2m) Controller Wired Mode Cable 5-pin to 5-pin [11-1413]</li>
<li>1 x Teradek Case Large - Black with RT Motion Single Channel Controller Set Foam [28-0068-7]</li>
</ul>
CTRL.1 Wireless Lens Control Kit with Lens Mapping - Metric
TRT-15-0046-M
Single-Axis Superspeed Wireless Lens Control Kit with Lens Mapping
Teradek
<h4>Overview</h4>
<p>The Single-Axis Lens Control Kit contains everything you need to get started with wireless lens control. It includes a single-axis CTRL.1 hand unit for precision focus pulling, a 2-channel MDR-M receiver, and a MK3.1 motor with additional accessories.</p>
<h4>CTRL.1</h4>
<p>The CTRL.1 is a single-axis handheld controller for precision wireless lens control. Part of the Teradek RT ecosystem, CTRL.1 allows for either focus, iris or zoom control, is compatible with all Teradek RT motors & receiver and will work simultaneously with other RT Units controlling the other axes on the same lens.</p>
<p>CTRL.1 introduces low-latency information overlays showing lens data on SmallHD monitors. Lens mapping and overlaying is an upgrade that can be added on at any time for an additional price. Available in metric and imperial units.</p>
<h4>MDR-M</h4>
<p>The MDR-M is a 2-axis receiver for focus, iris and/or zoom with an operation range of up to 5000 ft. Its ultra-lightweight design allows it to mount seamlessly to any camera setup, and the built-in 2.4 GHz FHSS radio can cut through the toughest of RF conditions. MDR-M receivers also feature direct integration with RED DSMC & DSMC2 cameras for controlling EF/AF lens/iris with the camera’s internal motors, shutter, ISO, button features (2x magnification, edge, focus assist).</p>
<h4>MOTR.X Motor</h4>
<p>The MOTR.X operates with lightning-fast speed and incredible torque while remaining totally silent. The motor has 6x the service life of brushed motors, 15 and 19mm rod support and interchangeable gears.</p>
<p>Additionally, new in/out motor ports pass data and power, allowing MOTR.X units to be daisy-chained from one motor to the next to reduce cable clutter on your rig.</p>
<h4>Lens Mapping</h4>
<p>CTRL.1 introduces built-in lens mapping, which allows for auto-calibrating lenses to pre-marked focus rings and accessing configurations at any time with the touch of a button. Pre-marked rings cover multiple lenses, saving time on set from manually calibrating after every lens swap.</p>
<h4>SmallHD Overlays</h4>
<p>CTRL.3 and CTRL.1 feature the world’s first lens data overlays on SmallHD monitors running OS3. Get critical follow focus information directly on your monitor including lens focal distance, focal length, iris, zoom and more.</p>
<ul id="product-keypoints">
<li>CTRL.1 Wireless Lens Control Kit with Lens Mapping - Metric</li>
<li>Complete Teradek RT precision lens control kit</li>
<li>Wireless control focus, iris or zoom with up to 5,000 ft. of range</li>
<li>Supports lens mapping for precision focus pulling</li>
<li>Lens mapping overlays directly on compatible SmallHD monitors</li>
</ul>
<ul data-bind="foreach: list_item.details">
<li><span data-bind="text: $data">1 x Teradek RT Pre-Marked focus Ring - 0.25m minimum focus</span></li>
<li><span data-bind="text: $data">1 x Teradek RT Pre-Marked focus Ring - 0.5m minimum focus</span></li>
<li><span data-bind="text: $data">1 x Teradek RT Pre-Marked focus Ring - 1m minimum focus</span></li>
<li><span data-bind="text: $data">1 x Teradek RT Pre-Marked focus Ring - 2m minimum focus</span></li>
<li><span data-bind="text: $data">1 x Teradek RT Pre-Marked focus Ring - 3m minimum focus</span></li>
<li><span data-bind="text: $data">1 x Teradek RT Pre-Marked Iris Ring - 1-32</span></li>
<li><span data-bind="text: $data">1 x Firmware License Key Card for TeradekRT With License Key1 x Controller Neck-strap [11-1443]</span></li>
<li><span data-bind="text: $data">1 x LP-E6 1600mAh Li-ion Battery [14-0014-1]</span></li>
<li><span data-bind="text: $data">1 x LP-E6 Travel charger [14-0015]</span></li>
<li><span data-bind="text: $data">1 x Receiver Rail Clamp for 15/19mm rods [11-1439]</span></li>
<li><span data-bind="text: $data">1 x Additional White disc (Type B) note: 1 white disc preinstalled on CTRL.1 [11-1459]</span></li>
<li><span data-bind="text: $data">1 x Latitude-M Receiver [15-0008]</span></li>
<li><span data-bind="text: $data">1 x MOTR.X Motor, 15/19mm rod motor bracket, 0.8 lens gear [15-0044]</span></li>
<li><span data-bind="text: $data">1 x CTRL.1 Single-Axis Controller [15-0043]</span></li>
<li><span data-bind="text: $data">1 x Mini-USB (5pin) to USB - 18 in Cable (Firmware) [11-1267]</span></li>
<li><span data-bind="text: $data">1 x Latitude DTAP Power Cable [11-1378]</span></li>
<li><span data-bind="text: $data">1 x Latitude Motor Cable 16in/40cm Straight to Straight [11-1462]</span></li>
<li><span data-bind="text: $data">1 x 5pin conn to USB Micro_0.2m [11-1469]</span></li>
<li><span data-bind="text: $data">1 x Teradek Vinyl Zipper Bag 250x150mm [11-0808]</span></li>
<li><span data-bind="text: $data">1 x 6.5 ft (2m) Controller Wired Mode Cable 5-pin to 5-pin [11-1413]</span></li>
<li><span data-bind="text: $data">1 x Teradek Case Large - Black with RT Motion Single Channel Controller Set Foam [28-0068-7]</span></li>
</ul>
BIT-074
TER-BIT074
HDMI Cable (Male to Male) Type A
Teradek
<ul>
<li>Type A Full HDMI Male to Type A Full HDMI Male</li>
<li>Length: 18" / 45cm</li>
</ul>
Ace 500 HDMI TX
TER-ACE-500TX
Wireless HDMI Transmitter
Teradek
<ul>
<li>Wireless HDMI Transmitter</li>
<li>1080p60 wireless video, less than 1ms of delay.</li>
<li>Up to 500 ft. wireless range.</li>
<li>HDMI input.</li>
<li>Transmit to up to 4 receivers.</li>
<li>1x ¼-20” mounting point.</li>
<li>Tx weight: 126g</li>
</ul>
<ul>
<li>1x Ace 500 TX</li>
<li>1x Mini-USB (5pin) to USB - 18in/45cm Cable</li>
<li>1x P-Tap to R/A Barrel, 18 in Cable</li>
<li>1x Ultra Thin HDMI Male Type A to HDMI Male Type A 18 Inch</li>
<li>1x Quickstart Guide</li>
</ul>
Ace 500 HDMI RX
TER-ACE-500RX
Wireless HDMI Receiver
Teradek
<ul>
<li>Wireless HDMI Receiver</li>
<li>1080p60 wireless video, less than 1ms of delay</li>
<li>Up to 500 ft. wireless range</li>
<li>HDMI output</li>
<li>Transmit to up to 4 receivers</li>
<li>1x ¼-20” mounting point</li>
<li>Rx weight: 146g</li>
</ul>
<ul>
<li>1x Ace 500 RX</li>
<li>1x Mini-USB (5pin) to USB - 18in/45cm Cable</li>
<li>1x Ultra Thin HDMI Male Type A to HDMI Male Type A 18 Inch</li>
<li>1x R/A Barrel Power Supply Unit 18W AC Adapter 12VC (International) 6 ft</li>
<li>1x Quickstart Guide</li>
</ul>
BIT-835
TER-BIT835
Antenna Array for Bolt XT 1000/3000 RX (2nd Gen) - Gold Mount
Teradek
<ul>
<li>Antenna Array for Bolt XT 1000/3000 RX (2nd Gen) - Gold Mount</li>
</ul>
Zoomrocker-S
TRT-15-0032
Single-hand controller for focus & iris pulling via a wired connection any RT MDR (Right Hand Version)
Teradek
<ul>
<li>Single-hand controller for focus & iris pulling via a wired connection any RT MDR</li>
<li>Clamp securely to rods between 22mm and 38mm and control any lens axis with ease</li>
<li>Pair with Zoomrocker-X for complete lens control</li>
<li>Configure to any axis</li>
<li>Built-in run/stop control</li>
<li>Supports 22mm to 38mm rods</li>
<li>Right hand version</li>
</ul>
Zoomrocker-X
TRT-15-0033
Single-hand controller for focus & iris pulling via a wired connection any RT MDR (Left Hand Version)
Teradek
<ul>
<li>Single-hand controller for focus & iris pulling via a wired connection any RT MDR</li>
<li>Clamp securely to rods between 22mm and 38mm and control any lens axis with ease</li>
<li>Pair with Zoomrocker-S for complete lens control</li>
<li>Configure to any axis</li>
<li>Built-in run/stop control</li>
<li>Supports 22mm to 38mm rods</li>
<li>Left hand version</li>
</ul>
Power Cable ST-DTap
TRT-11-1474
Straight to DTAP Power Cable - 40cm
Teradek
<ul>
<li>Straight to DTAP Power Cable - 40cm</li>
<li>Power the MDR from a DTap battery</li>
<li>Right-angled LM connector and colour-coded overmold allowing for an easy compact setup</li>
</ul>
Power Cable ST-ST
TRT-11-1475
2-pin to 2-pin, Straight to Straight Power Cable - 40cm
Teradek
<ul>
<li>Supply power to Teradek RT MDRs with 2-pin to 2-pin, Straight to Straight Power Cable</li>
<li>40cm Long</li>
</ul>
CTRL.3 Motor Wireless Lens Control Kit (1-Motor, MDR.ACI)
TRT-15-0047-1A
1 Axis Lens Control Kit (MDR.ACI)
Teradek
<ul>
<li>1-axis lens control set</li>
<li>Wireless control of focus, iris or zoom with up to 5,000 ft. of range.</li>
<li>Includes lens mapping with pre-marked rings.</li>
<li>Lens data overlays on SmallHD monitors running OS3.</li>
</ul>
<ul>
<li>1 x Controller Neckstrap</li>
<li>2 x LP-E6 Duracell 1600mAh Li-ion Battery</li>
<li>5 x White Disc Type B</li>
<li>1 x AC UI Top Bracket (Machined Anodized)</li>
<li>1 x AC UI Bottom Bracket (Machined Anodized)</li>
<li>1 x Hex L key 2.5mm size 3-5/8" length</li>
<li>4 x Screw Steel Nylon-Tip Set M4 x 8mm</li>
<li>4 x Screw Socket Head Cap Black Oxide M3 x 4mm</li>
<li>1 x Hex L key 2mm size 3-3/8" length</li>
<li>1 x MDR.ACI</li>
<li>1 x RT-CTRL Iris Strip Slider 0 (1-22)</li>
<li>1 x RT-CTRL Iris Strip Slider 10 (1.4-22)</li>
<li>1 x RT-CTRL Iris Strip Slider 20 (2-22)</li>
<li>1 x RT-CTRL Iris Strip Slider 30 (2.8-22)</li>
<li>1 x MOTR.X</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 0.25m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 0.5m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 1m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 2m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 3m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 10in minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 20in minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 3ft, 6in minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 6ft minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 10ft minimum focus</li>
<li>1 x Teradek RT Pre-Marked Iris Ring - 1-32</li>
<li>1 x Teradek RT CTRL.3</li>
<li>1 x Teradek RT Monitor Bracket for Hand Controllers</li>
<li>1 x Teradek RT Quick-release Motor Extension Rod Clamp</li>
<li>1 x Mini-USB (5pin) to USB - 18in Cable</li>
<li>1 x Teradek RT Motor Cable - ST to ST (0.2m / 8in)</li>
<li>1 x Teradek RT Motor Cable - Straight to Straight (0.4m / 16in)</li>
<li>1 x Teradek RT Motor Cable - Straight to Straight (0.6m / 24in)</li>
<li>1 x ACI Control + Power Cable</li>
<li>1 x ACI Control + 2-pin Power Cable</li>
<li>1 x SmallHD Monitor Interface Cable - 5pin to USB Micro (0.4m)</li>
<li>1 x SmallHD Monitor Interface Cable - 5pin to 703 Bolt 5pin 0.25m</li>
<li>1 x SmallHD Monitor Interface Cable - 5pin to USB Type A (1m)</li>
<li>1 x Teradek Case XLarge - Black with RT Motion CTL3 Controller Set Foam</li>
<li>1 x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1 x Travel Battery Charger for LP-E6 Batteries</li>
<li>1 x Teradek Standard Terms and Conditions</li>
<li>1 x Quickstart Guide - Teradek RT CTRL.3</li>
</ul>
CTRL.3 Motor Wireless Lens Control Deluxe Kit (3-Motors, MDR.ACI)
TRT-15-0047-3A
Complete 3-Axis Lens Control Kit (MDR.ACI)
Teradek
<ul>
<li>Complete 3-axis lens control kit</li>
<li>Wireless control of focus, iris or zoom with up to 5,000 ft. of range</li>
<li>Includes lens mapping with pre-marked rings</li>
<li>Lens data overlays on SmallHD monitors running OS3</li>
</ul>
<ul>
<li>1 x Controller Neckstrap</li>
<li>3 x LP-E6 Duracell 1600mAh Li-ion Battery</li>
<li>5 x White Disc Type B</li>
<li>1 x AC UI Top Bracket (Machined Anodized)</li>
<li>1 x AC UI Bottom Bracket (Machined Anodized)</li>
<li>1 x Hex L key 2.5mm size 3-5/8" length</li>
<li>4 x Screw Steel Nylon-Tip Set M4 x 8mm</li>
<li>4 x Screw Socket Head Cap Black Oxide M3 x 4mm</li>
<li>1 x Hex L key 2mm size 3-3/8" length</li>
<li>1 x MDR.ACI</li>
<li>1 x RT-CTRL Iris Strip Slider 0 (1-22)</li>
<li>1 x RT-CTRL Iris Strip Slider 10 (1.4-22)</li>
<li>1 x RT-CTRL Iris Strip Slider 20 (2-22)</li>
<li>1 x RT-CTRL Iris Strip Slider 30 (2.8-22)</li>
<li>3 x MOTR.X</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 0.25m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 0.5m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 1m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 2m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 3m minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 10in minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 20in minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 3ft, 6in minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 6ft minimum focus</li>
<li>1 x Teradek RT Pre-Marked focus Ring - 10ft minimum focus</li>
<li>1 x Teradek RT Pre-Marked Iris Ring - 1-32</li>
<li>1 x Teradek RT CTRL.3</li>
<li>1 x Teradek RT Monitor Bracket for Hand Controllers</li>
<li>3 x Teradek RT Quick-release Motor Extension Rod Clamp</li>
<li>1 x Mini-USB (5pin) to USB - 18in Cable</li>
<li>3 x Teradek RT Motor Cable - ST to ST (0.2m / 8in)</li>
<li>3 x Teradek RT Motor Cable - Straight to Straight (0.4m / 16in)</li>
<li>1 x Teradek RT Motor Cable - Straight to Straight (0.6m / 24in)</li>
<li>1 x ACI Control + Power Cable</li>
<li>1 x ACI Control + 2-pin Power Cable</li>
<li>1 x SmallHD Monitor Interface Cable - 5pin to USB Micro (0.4m)</li>
<li>1 x SmallHD Monitor Interface Cable - 5pin to 703 Bolt 5pin 0.25m</li>
<li>1 x SmallHD Monitor Interface Cable - 5pin to USB Type A (1m)</li>
<li>1 x Teradek Case XLarge - Black with RT Motion CTL3 Controller Set Foam</li>
<li>3 x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1 x Travel Battery Charger for LP-E6 Batteries</li>
<li>1 x Teradek Standard Terms and Conditions</li>
<li>1 x Quickstart Guide - Teradek RT CTRL.3</li>
</ul>
MDR.X Run/Stop Cable - ARRI
TRT-11-1476
ARRI (Alexa, Amira) Run/Stop cable (6-pin Push-Pull) for MDR.X
Teradek
<ul>
<li>ARRI (Alexa, Amira) Run/Stop cable (6-pin Push-Pull) for MDR.X</li>
<li>Use to trigger the run/stop function on ARRI Alexa and Amira Cameras with RS port</li>
<li>6pin to 3pin Fischer</li>
<li>Length: 60cm</li>
</ul>
MDR.X Run/Stop Cable - Sony F55
TRT-11-1477
Sony F55 Run/Stop cable (6-Pin Push Pull) for MDR.X
Teradek
<ul>
<li>Sony F55 Run/Stop cable (6-Pin Push Pull) for MDR.X</li>
<li>Use to trigger the run/stop function on the Sony F5 / F55</li>
<li>Length: 40cm</li>
</ul>
MDR.X Run/Stop Cable - LANC
TRT-11-1478
LANC Run/Stop cable (6-pin Push-Pull) for MDR.X
Teradek
<ul>
<li>LANC Run/Stop cable (6-pin Push-Pull) for MDR.X</li>
<li>Trigger the Run/Stop function on LANC equipped cameras, such as:
<ul>
<li>Sony (FS-700, FS7, etc.)</li>
<li>Canon (C300, etc.)</li>
<li>Blackmagic</li>
</ul>
</li>
<li>Length: 40cm</li>
</ul>
MDR.X Run/Stop Cable - Alexa Mini
TRT-11-1479
Alexa Mini Run/Stop cable (6-pin Push-Pull to 7-pin Push-Pull) for MDR.X
Teradek
<ul>
<li>Alexa Mini Run/Stop cable (6-pin Push-Pull to 7-pin Push-Pull) for MDR.X</li>
<li>Use to trigger the run/stop function on Alexa Mini Cameras with RS port</li>
<li>6pin to 7pin circular locking connector</li>
<li>Length: 60cm</li>
</ul>
MDR.X Camera Control Cable - RED (10"/25cm)
TRT-11-1480
RED-CTRL Cable (6-pin Push-Pull) for MDR.X
Teradek
<ul>
<li>RED-CTRL Cable (6-pin Push-Pull) for MDR.X</li>
<li>Connect the MDR to RED cameras equipped with a CTRL socket</li>
<li>Enables run/stop, control of EF lenses and more</li>
<li>Length: 25cm / 10"</li>
</ul>
MDR.X Camera Control Cable - RED (15"/40cm)
TRT-11-1481
RED-CTRL Cable (6-pin Push-Pull) for MDR.X
Teradek
<ul>
<li>RED-CTRL Cable (6-pin Push-Pull) for MDR.X</li>
<li>Connect the MDR to RED cameras equipped with a CTRL socket</li>
<li>Enables run/stop, control of EF lenses and more</li>
<li>Length: 40cm / 15"</li>
</ul>
MDR.X Run/Stop Cable - Phantom
TRT-11-1482
Phantom Run/Stop Cable (6-pin Push-Pull) for MDR.X
Teradek
<ul>
<li>Phantom Run/Stop Cable (6-pin Push-Pull) for MDR.X</li>
<li>Activate Run/Stop on Phantom 4K Gold from Teradek RT controllers</li>
<li>Length: 40cm / 16"</li>
</ul>
ACI Control + 2pin Power Cable
TRT-11-0262
Y-cable to power and operate ACI modules
Teradek
<ul>
<li>Y-cable to power and operate ACI modules</li>
<li>4-pin cable (ACI) to 2-pin (Power) and RED RCP CTRL cable (DSMC2 module)</li>
<li>Compatible with ACI and MDR.ACI</li>
<li>Connect the ACI to a power D-Tap supply and RED’s RCP port simultaneously with this Y-cable</li>
</ul>
Quick-Release Motor Rod Clamp
TRT-11-1465
Easily mount and remove Teradek RT motors with this latching quick-release rod clamp
Teradek
<ul>
<li>Easily mount and remove Teradek RT motors with this latching quick-release rod clamp</li>
<li>Compatible with 15mm and 19mm rods</li>
<li>Supports MOTR.X and MK3.1 motors</li>
</ul>
Motor Cable - Straight to Straight (8"/20cm)
TRT-11-1460
4-pin Straight to 4-pin Straight Motor Cable
Teradek
<ul>
<li>4-pin Straight to 4-pin Straight Motor Cable</li>
<li>Ultra flexible cable exits downwards from MOTR.X for easy routing back to the RECEIVER or daisy-chained to another motor</li>
<li>Length: 20cm / 8"</li>
</ul>
Motor Cable - Straight to Straight (16"/40cm)
TRT-11-1462
4-pin Straight to 4-pin Straight Motor Cable
Teradek
<ul>
<li>4-pin Straight to 4-pin Straight Motor Cable</li>
<li>Ultra flexible cable exits downwards from MOTR.X for easy routing back to the RECEIVER or daisy-chained to another motor</li>
<li>Length: 40cm / 16"</li>
</ul>
Motor Cable - Straight to Straight (24"/60cm)
TRT-11-1463
4-pin Straight to 4-pin Straight Motor Cable
Teradek
<ul>
<li>4-pin Straight to 4-pin Straight Motor Cable</li>
<li>Ultra flexible cable exits downwards from MOTR.X for easy routing back to the RECEIVER or daisy-chained to another motor</li>
<li>Length: 60cm / 24"</li>
</ul>
Motor Cable - Straight to Straight (12"/30cm)
TRT-11-1461
4-pin Straight to 4-pin Straight Motor Cable
Teradek
<ul>
<li>4-pin Straight to 4-pin Straight Motor Cable</li>
<li>Ultra flexible cable exits downwards from MOTR.X for easy routing back to the RECEIVER or daisy-chained to another motor</li>
<li>Length: 30cm / 12"</li>
</ul>
Monitor Bracket for Hand Controllers
TRT-11-1464
Mount selected SmallHD monitors to the top of CTRL.1 / CTRL.3
Teradek
<ul>
<li>Mount selected SmallHD monitors to the top of CTRL.1 / CTRL.3</li>
<li>The monitor bracket allows for mounting SmallHD FOCUS, CINE 7 and 703 Bolt monitors directly to CTRL.1 or CTRL.3</li>
</ul>
ACI Control + PTap Power Cable
TRT-11-0261
Y-cable to power and operate ACI modules
Teradek
<ul>
<li>Y-cable to power and operate ACI modules</li>
<li>Connect the ACI to a power P-Tap(D-Tap) supply and RED’s RCP port simultaneously with this Y-cable</li>
</ul>
Quick-Release Motor Extension Rod Clamp
TRT-11-1466
Allows for optimal Teradek RT motor placement on camera rigs esp. lenses with larger diameters or tight locations with minimal space
Teradek
<ul>
<li>Allows for optimal Teradek RT motor placement on camera rigs esp. lenses with larger diameters or tight locations with minimal space</li>
<li>Easily attach and remove with quick-release functionality</li>
</ul>
LATITUDE Power Cable, XLR 4-pin RA - For Latitude MDR
TRT-11-1356
Latitude Power Cable 4-pin XLR (53cm, r/a to straight)
Teradek
<ul>
<li>Latitude Power Cable 4-pin XLR (40cm, r/a to straight)</li>
<li>Power the LATITUDE from an XLR-4pin. 1=GND, 4=Voltage</li>
<li>This cable has a right-angled LM connector and colour coded overmold allowing for an easy compact setup.</li>
<li>Cable Length 53cm / 21"</li>
</ul>
Latitude MDR - 2pin to 2pin (RA-RA) Power Cable for ARRI / RED
TRT-11-1380
2-pin right angle to 2-pin right angle power cable for Latitude-M
Teradek
<ul>
<li>2-pin right angle to 2-pin right angle power cable for Latitude-M</li>
<li>Power your MDR directly from a camera/base expander output with the 15”/4cm power cable. Designed for ARRI & RED cameras</li>
</ul>
MDR.M Run/Stop Cable - Phantom
TRT-11-1483
Phantom Run/Stop Cable (6-pin Push-Pull) for MDR.M / MDR.MB
Teradek
<ul>
<li>Phantom Run/Stop Cable (6-pin Push-Pull) for MDR.M / MDR.MB</li>
<li>Configure run/stop on PHANTOM cameras through Teradek RT controllers. Works on PHANTOM cameras with a BNC R/S connector.</li>
<li>This cable is only designed for the Phantom HD Gold, not Flex 4k.</li>
</ul>
MK3.1 Run/Stop Cable - Alexa Mini
TRT-11-1446
Alexa Mini Run/Stop cable (Hirose to 7-pin circular locking connector) for MK3.1 Receiver
Teradek
<ul>
<li>Alexa Mini Run/Stop cable (Hirose to 7-pin circular locking connector) for MK3.1 Receiver</li>
<li>Use to trigger the run/stop function on ARRI Alexa Mini Cameras with RS port</li>
<li>Hirose to 7-pin circular locking connector</li>
<li>Length: 60cm</li>
</ul>
Monitor Cable for SmallHD Overlays - FOCUS Bolt & CINE 7
TRT-11-1469
5 pin to USB Micro Monitor Cable for SmallHD Overlays (8"/20cm)
Teradek
<ul>
<li>5 pin to USB Micro Monitor Cable for SmallHD Overlays (8"/20cm)</li>
<li>Connect the CTRL.1 or CTRL.3 to FOCUS Bolt RXs and CINE 7 RXs running Pagebuilder OS3 to enable lens data overlays</li>
<li>Length: 8" / 20cm</li>
</ul>
Monitor Cable for SmallHD Overlays - FOCUS Bolt & CINE 7
TRT-11-1472
5 pin to USB Micro Monitor Cable for SmallHD Overlays (16"/40cm)
Teradek
<ul>
<li>5 pin to USB Micro Monitor Cable for SmallHD Overlays (16"/40cm)</li>
<li>Connect the CTRL.1 or CTRL.3 to FOCUS Bolt RXs and CINE 7 RXs running Pagebuilder OS3 to enable lens data overlays</li>
<li>Length: 16" / 40cm</li>
</ul>
Monitor Cable for SmallHD Overlays - 703 Bolt
TRT-11-1470
5pin to 5pin "USB" Monitor Cable for SmallHD Overlays (10"/25cm)
Teradek
<ul>
<li>5 pin to USB Micro Monitor Cable for SmallHD Overlays</li>
<li>Connect the CTRL.1 or CTRL.3 to a 703 Bolt running Pagebuilder OS3 to enable lens data overlays</li>
<li>Length: 10" / 25cm</li>
</ul>
Cinetape Interface Cable (15"/40cm)
TRT-11-1473
Provides communication between MDR.X and Cinetape
Teradek
<ul>
<li>Provides communication between MDR.X and Cinetape</li>
<li>Length: 15" / 40cm</li>
</ul>
White Disc for CTRL.1 or CTRL.3
TRT-11-1459
White Marking Disc for CTRL.1 or CTRL.3
Teradek
<ul>
<li>White Marking Disc for CTRL.1 or CTRL.3</li>
<li>Use a China Marker to clearly mark the disc (NOTE: Permanent marker pens can also be used and cleaned with isopropyl alcohol)</li>
</ul>
Pre-Marked Iris Ring - 1-32
TRT-11-1457
Replacement Pre-Marked Iris Ring for CTRL.1 or CTRL.3
Teradek
<ul>
<li>Replacement Pre-Marked Iris Ring for CTRL.1 or CTRL.3</li>
<li>Auto-calibrate lenses to pre-marked focus rings</li>
<li>Save time on set from manually calibrating after every lens swap</li>
<li>Note: This uses Metric measurements on rings</li>
</ul>
Protective Case for CTRL.3 3 Motor Lens Control Kit
TRT-11-1486
Custom Case for Teradek RT CTRL.3 Lens Control Kit (holds up to 3x motors)
Teradek
<ul>
<li>Custom Case for Teradek RT CTRL.3 Lens Control Kit (holds up to 3x motors)</li>
<li>Includes custom cut foam insert for 3 Motors, and white disc/lens rings. Motors and Receiver can be stored with brackets on</li>
<li>Waterproof and dust tight design.</li>
<li>Molded-in hinge for added protection</li>
<li>Trigger release latch system</li>
<li>Snap-down rubber over-molded cushion grip handle</li>
<li>Ambient pressure equalization valve</li>
<li>Resistant to UV, solvents, corrosion, fungus</li>
<li>Resistant to impact damage</li>
</ul>
Protective Case for CTRL.1 Single-Axis Wireless Lens Control Kit
TRT-11-1417
Protective Case for CTRL.1 Single-Axis Wireless Lens Control Kit
Teradek
<ul>
<li>Protective Case for CTRL.1 Single-Axis Wireless Lens Control Kit</li>
<li>Includes custom cut foam insert for the CTRL.1 and white disc/lens rings. Motors and Receiver can be stored with brackets on.</li>
<li>Dustproof</li>
<li>Waterproof</li>
<li>Pressure Valve</li>
</ul>
Bolt 4K 750 Wireless Transmitter
TER-10-2101
12G-SDI/HDMI Wireless Video Transmitter - 750ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 750 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 750 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 750 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 750 Wireless Transmitter V-Mount
TER-10-2101-V
12G-SDI/HDMI Wireless Video Transmitter V-Mount - 750ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 750 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 750 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 750 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 750 Wireless Transmitter Gold Mount
TER-10-2101-G
12G-SDI/HDMI Wireless Video Transmitter Gold Mount - 750ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 750 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 750 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 750 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 750 Wireless Receiver
TER-10-2102
12G-SDI/HDMI Wireless Video Receiver - 750ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 750 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 750 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 750 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 750 Wireless Receiver V-Mount
TER-10-2102-V
12G-SDI/HDMI Wireless Video Receiver V-Mount - 750ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 750 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 750 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 750 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 750 Wireless Receiver Gold Mount
TER-10-2102-G
12G-SDI/HDMI Wireless Video Receiver Gold-Mount - 750ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 750 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 750 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 750 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 1500 Wireless Transmitter
TER-10-2111
12G-SDI/HDMI Wireless Video Transmitter - 1500ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 1500 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 1500 Wireless Transmitter Gold Mount
TER-10-2111-G
12G-SDI/HDMI Wireless Video Transmitter Gold Mount - 1500ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 1500 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 1500 Wireless Transmitter V-Mount
TER-10-2111-V
12G-SDI/HDMI Wireless Video Transmitter V-Mount - 1500ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 1500 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 1500 Wireless Receiver
TER-10-2112
12G-SDI/HDMI Wireless Video Receiver - 1500ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 1500 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 1500 Wireless Receiver V-Mount
TER-10-2112-V
12G-SDI/HDMI Wireless Video Receiver V-Mount - 1500ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 1500 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 1500 Wireless Receiver Gold Mount
TER-10-2112-G
12G-SDI/HDMI Wireless Video Receiver Gold Mount - 1500ft
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 1500 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 750 V-Mount Deluxe Kit
TER-10-2100-V
Bolt 4K 750 12G-SDI/HDMI Deluxe Kit
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 750 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 750 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 750 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 750 Gold Mount Deluxe Kit
TER-10-2100-G
Bolt 4K 750 12G-SDI/HDMI Deluxe Kit - Gold Mount
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 750 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 750 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 750 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 1500 V-Mount Deluxe Kit
TER-10-2110-V
Bolt 4K 1500 12G-SDI/HDMI Deluxe Kit - V-Mount
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 1500 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K 1500 Gold Mount Deluxe Kit
TER-10-2110-G
Bolt 4K 1500 12G-SDI/HDMI Deluxe Kit - Gold Mount
Teradek
<h4>Real-Time 4K Wireless Video</h4>
<p>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.</p>
<h4>True HDR Colour</h4>
<p>Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.</p>
<h4>Rock-Solid Reliability</h4>
<p>Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.</p>
<h4>Universal Compatibility</h4>
<p>Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.</p>
<h4>Inputs/Outputs</h4>
<p>Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.<br /> Receiver: 2x 12G-SDI, 1x HDMI 2.0</p>
<h4>Battery Plates</h4>
<p>Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.</p>
<h4>Camera Metadata</h4>
<p>Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.</p>
<h4>Bolt App for iOS</h4>
<p>Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.</p>
<ul>
<li>Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay</li>
<li>Up to 1500 ft. of range</li>
<li>Each transmitter can send video to up to 6 receivers</li>
<li>Transmitter Inputs / Outputs: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output</li>
<li>Receiver Inputs / Outputs: 2x 12G-SDI, 1x HDMI 2.0</li>
<li>Compatible with any model in the Bolt 4K line</li>
</ul>
<ul>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless TX</li>
<li>1x Bolt 1500 12G-SDI/HDMI Wireless RX</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K MAX V-Mount Wireless TX/RX Set
TER-10-2119-V
Bolt 4K MAX V-Mount 12G-SDI/HDMI Wireless TX/RX - Range 3000ft
Teradek
<p>Bolt 4K MAX is a reliable, high performance wireless video system. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.</p>
<p>Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.</p>
<p>Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.</p>
<p>A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.</p>
<ul>
<li>Video: Up to 4K60FPS</li>
<li>Up to 3000ft range</li>
<li>Inputs: 12G-SDI, HDMI 2.0</li>
<li>Outputs: 12G-SDI, HDMI 2.0</li>
<li>Multicast: Up to 6 RXs</li>
<li>Compatible with Bolt 4K 750, Bolt 4K 1500</li>
</ul>
<ul>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless TX V-Mount</li>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless RX V-Mount</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K MAX Gold Mount Wireless TX/RX Set
TER-10-2119-G
Bolt 4K MAX Gold Mount 12G-SDI/HDMI Wireless TX/RX - Range 3000ft
Teradek
<p>Bolt 4K MAX is a reliable, high performance wireless video system. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.</p>
<p>Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.</p>
<p>Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.</p>
<p>A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.</p>
<ul>
<li>Video: Up to 4K60FPS</li>
<li>Up to 3000ft range</li>
<li>Inputs: 12G-SDI, HDMI 2.0</li>
<li>Outputs: 12G-SDI, HDMI 2.0</li>
<li>Multicast: Up to 6 RXs</li>
<li>Compatible with Bolt 4K 750, Bolt 4K 1500</li>
</ul>
<ul>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless TX V-Mount</li>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless RX V-Mount</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K MAX Wireless Receiver V-Mount
TER-10-2122-V
12G-SDI/HDMI Wireless Video Receiver V-Mount - 3000ft
Teradek
<p>Bolt 4K MAX is a reliable, high performance wireless video system. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.</p>
<p>Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.</p>
<p>Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.</p>
<p>A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.</p>
<ul>
<li>Video: Up to 4K60FPS</li>
<li>Up to 3000ft range</li>
<li>Inputs: 12G-SDI, HDMI 2.0</li>
<li>Outputs: 12G-SDI, HDMI 2.0</li>
<li>Multicast: Up to 6 RXs</li>
<li>Compatible with Bolt 4K 750, Bolt 4K 1500</li>
</ul>
<ul>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless TX V-Mount</li>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless RX V-Mount</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K MAX Wireless Receiver Gold Mount
TER-10-2122-G
12G-SDI/HDMI Wireless Video Receiver Gold Mount - 3000ft
Teradek
<p>Bolt 4K MAX is a reliable, high performance wireless video system. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.</p>
<p>Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.</p>
<p>Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.</p>
<p>A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.</p>
<ul>
<li>Video: Up to 4K60FPS</li>
<li>Up to 3000ft range</li>
<li>Inputs: 12G-SDI, HDMI 2.0</li>
<li>Outputs: 12G-SDI, HDMI 2.0</li>
<li>Multicast: Up to 6 RXs</li>
<li>Compatible with Bolt 4K 750, Bolt 4K 1500</li>
</ul>
<ul>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless TX V-Mount</li>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless RX V-Mount</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K MAX Wireless Transmitter Gold Mount
TER-10-2121-G
12G-SDI/HDMI Wireless Video Transmitter Gold Mount - 3000ft
Teradek
<p>Bolt 4K MAX is a reliable, high performance wireless video system. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.</p>
<p>Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.</p>
<p>Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.</p>
<p>A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.</p>
<ul>
<li>Video: Up to 4K60FPS</li>
<li>Up to 3000ft range</li>
<li>Inputs: 12G-SDI, HDMI 2.0</li>
<li>Outputs: 12G-SDI, HDMI 2.0</li>
<li>Multicast: Up to 6 RXs</li>
<li>Compatible with Bolt 4K 750, Bolt 4K 1500</li>
</ul>
<ul>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless TX V-Mount</li>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless RX V-Mount</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K MAX Wireless Transmitter V-Mount
TER-10-2121-V
12G-SDI/HDMI Wireless Video Transmitter V-Mount - 3000ft
Teradek
<p>Bolt 4K MAX is a reliable, high performance wireless video system. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.</p>
<p>Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.</p>
<p>Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.</p>
<p>A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.</p>
<ul>
<li>Video: Up to 4K60FPS</li>
<li>Up to 3000ft range</li>
<li>Inputs: 12G-SDI, HDMI 2.0</li>
<li>Outputs: 12G-SDI, HDMI 2.0</li>
<li>Multicast: Up to 6 RXs</li>
<li>Compatible with Bolt 4K 750, Bolt 4K 1500</li>
</ul>
<ul>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless TX V-Mount</li>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless RX V-Mount</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Bolt 4K TX/2RX</li>
<li>1x Teradek Vinyl Zipper Bag 250x150mm</li>
<li>1x Teradek Vinyl Zipper Bag 250x230mm</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
</ul>
Bolt 4K MAX Gold Mount Deluxe Kit
TER-10-2120-G
Bolt 4K MAX 12G-SDI/HDMI Deluxe Kit - Gold Mount
Teradek
<p>Bolt 4K MAX is a reliable, high performance wireless video system. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.</p>
<p>Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.</p>
<p>Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.</p>
<p>A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.</p>
<ul>
<li>Video: Up to 4K60FPS</li>
<li>Up to 5000 ft. with Panel Antenna</li>
<li>Inputs: 12G-SDI, HDMI 2.0</li>
<li>Outputs: 12G-SDI, HDMI 2.0</li>
<li>Multicast: Up to 6 RXs</li>
<li>Compatible with Bolt 4K 750, Bolt 4K 1500</li>
</ul>
<ul>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless TX Gold Mount</li>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless RX Gold Mount</li>
<li>1x Antenna Array with Gold Mount</li>
<li>4x Bolt 4K Wire Cover Plate (Machined Anodized)</li>
<li>1x Bolt 4K TX Mounting Bracket</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>4x Screw FlatHead Phillips Black Oxide 18-8 S S 0-80 x 1/8in</li>
<li>2x Screw Socket Cap A S, M3 x 16mm</li>
<li>1x Hex L key 2.5mm size 3-5/8" length</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x 2pin Conn. to 2pin Conn. 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case XL - Bolt 4K TX/4RX</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
<li>1x Insert - Bolt 4K A/C Adapter Requirements</li>
<li>1x Wooden Camera - Ultra Arm Monitor Mount (1/4-20 to 3/8-16, 5in)</li>
</ul>
Bolt 4K MAX V-Mount Deluxe Kit
TER-10-2120-V
Bolt 4K MAX 12G-SDI/HDMI Deluxe Kit - V-Mount
Teradek
<p>Bolt 4K MAX is a reliable, high performance wireless video system. Featuring exclusive technology found only in this model, the MAX is designed to be your mission critical wireless workhorse.</p>
<p>Transmit up to an 5,000 ft line of sight with the next-generation Array 4K Panel Antenna.</p>
<p>Fixed Frequency Mode locks onto your designated 5GHz channel for enhanced performance in challenging RF environments.</p>
<p>A unique antenna design provides a clearer wireless signal with faster reconnection times over long distances.</p>
<ul>
<li>Video: Up to 4K60FPS</li>
<li>Up to 5000 ft. with Panel Antenna</li>
<li>Inputs: 12G-SDI, HDMI 2.0</li>
<li>Outputs: 12G-SDI, HDMI 2.0</li>
<li>Multicast: Up to 6 RXs</li>
<li>Compatible with Bolt 4K 750, Bolt 4K 1500</li>
</ul>
<ul>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless TX V-Mount</li>
<li>1x Bolt 4K MAX 12G-SDI/HDMI Wireless RX V-Mount</li>
<li>1x Antenna Array with V-Mount4 x Bolt 4K Wire Cover Plate (Machined Anodized)</li>
<li>1x Bolt 4K TX Mounting Bracket</li>
<li>1x Lightstand Adapter 3/8in</li>
<li>1x Hot Shoe Adaptor</li>
<li>4x Screw FlatHead Phillips Black Oxide 18-8 S S 0-80 x 1/8in</li>
<li>2x Screw Socket Cap A S, M3 x 16mm</li>
<li>1x Hex L key 2.5mm size 3-5/8" length</li>
<li>2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x 2pin Conn. to 2pin Conn. 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case XL - Bolt 4K TX/4RX</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Bolt 4K 750/1500</li>
<li>1x Insert - Bolt 4K A/C Adapter Requirements</li>
<li>1x Wooden Camera - Ultra Arm Monitor Mount (1/4-20 to 3/8-16, 5in)</li>
</ul>
Prism 802
TER-10-2802
4K HEVC encoding / decoding solution for next generation IP video workflows - 2 RU (Chassis Only)
Teradek
<ul>
<li>4K / UHD encoding / decoding at up to 60 fps</li>
<li>2RU (9 card) Chassis</li>
<li>HEVC / H.264 compression</li>
<li>10-bit, 4:2:2 image quality</li>
<li>8-channels of audio per card</li>
<li>Optional redundant network and power options</li>
<li>Up to 4 simultaneous 1080p60 encoders per card</li>
<li>Genlock input</li>
<li>IFB communications</li>
<li>SRT-ready</li>
</ul>
Prism 801
TER-10-2801
4K HEVC encoding / decoding solution for next generation IP video workflows - 1 RU (Chassis Only)
Teradek
<ul>
<li>4K / UHD encoding / decoding at up to 60 fps</li>
<li>1RU (3-card) Chassis</li>
<li>HEVC / H.264 compression</li>
<li>10-bit, 4:2:2 image quality</li>
<li>8-channels of audio per card</li>
<li>Optional redundant network and power options</li>
<li>Up to 4 simultaneous 1080p60 encoders per card</li>
<li>Genlock input</li>
<li>IFB communications</li>
<li>SRT-ready</li>
</ul>
CTRL.3 MOTOR WIRELESS LENS CONTROL KIT (1-MOTOR) + Cine 7 Gold Mount
MON-CINE7-SK-RX-GM-KIT-15-0047-1-PROMO
Single axis lens control kit with 7inch monitor - Gold Mount
Teradek
<h4>CTRL.3 MOTOR WIRELESS LENS CONTROL KIT (1-MOTOR)</h4>
<ul>
<li>1-axis lens control set</li>
<li>Wireless control of focus, iris or zoom with up to 5,000 ft. of range.</li>
<li>Includes lens mapping with pre-marked rings.</li>
<li>Lens data overlays on SmallHD monitors running OS3.</li>
</ul>
<h4>Cine 7</h4>
<p>The Cine 7 is the new standard for professional on-set monitoring, combining real-time ARRI camera control with a stunning 1,800 nit, 100% DCI-P3, 1080p display.</p>
<ul>
<li>ARRI camera control (via Ethernet).* (Support for additional manufacturers coming soon.)</li>
<li>Aircraft Grade Aluminum Body</li>
<li>Locking Power Connector & Interchangeable Battery Brackets<br />Gold Mount version: (Gold, Sony L)<br />V-Mount version: (V-Mount, Sony L)</li>
<li>7-inch 1920x1200p IPS LCD</li>
<li>1800 nits bright, 100% DCI-P3</li>
<li>HDMI: 1x HDMI In, 1x HDMI Out</li>
<li>SDI: 1x 3G SDI IN, 1x 3G SDI In/Out</li>
<li>Power: 2-Pin Power Input (10 to 34v, 2A DC)</li>
<li>Mounting: 4x ¼-20 thread points</li>
<li>Dimensions: 7.09in "W x 4.67in "H x 1.29in "D</li>
<li>Weight: 18.9 oz.</li>
</ul>
<p><small>* camera control licenses sold separately</small></p>
CTRL.3 MOTOR WIRELESS LENS CONTROL KIT (1-MOTOR) + Cine 7 V-Mount
MON-CINE7-SK-RX-VM-KIT-15-0047-1-PROMO
Single axis lens control kit with 7" monitor - V-Mount
Teradek
<h4>CTRL.3 MOTOR WIRELESS LENS CONTROL KIT (1-MOTOR)</h4>
<ul>
<li>1-axis lens control set</li>
<li>Wireless control of focus, iris or zoom with up to 5,000 ft. of range.</li>
<li>Includes lens mapping with pre-marked rings.</li>
<li>Lens data overlays on SmallHD monitors running OS3.</li>
</ul>
<h4>Cine 7</h4>
<p>The Cine 7 is the new standard for professional on-set monitoring, combining real-time ARRI camera control with a stunning 1,800 nit, 100% DCI-P3, 1080p display.</p>
<ul>
<li>ARRI camera control (via Ethernet).* (Support for additional manufacturers coming soon.)</li>
<li>Aircraft Grade Aluminum Body</li>
<li>Locking Power Connector & Interchangeable Battery Brackets<br />Gold Mount version: (Gold, Sony L)<br />V-Mount version: (V-Mount, Sony L)</li>
<li>7-inch 1920x1200p IPS LCD</li>
<li>1800 nits bright, 100% DCI-P3</li>
<li>HDMI: 1x HDMI In, 1x HDMI Out</li>
<li>SDI: 1x 3G SDI IN, 1x 3G SDI In/Out</li>
<li>Power: 2-Pin Power Input (10 to 34v, 2A DC)</li>
<li>Mounting: 4x ¼-20 thread points</li>
<li>Dimensions: 7.09in "W x 4.67in "H x 1.29in "D</li>
<li>Weight: 18.9 oz.</li>
</ul>
<p><small>* camera control licenses sold separately</small></p>
Ace 800
TER-ACE-800
Zero-delay wireless video Transmitter/Receiver Set
Teradek
<h4>AFFORDABLE WIRELESS VIDEO</h4>
<p>Ace 800 is an affordable, zero delay wireless video system featuring HD video transmission and professional performance with up to 800 ft. of range. Designed with the same reliability and performance as the renowned Teradek Bolt line, you get the benefits of wireless video without the hefty price tag.</p>
<h4>ZERO-DELAY HD QUALITY</h4>
<p>For mission-critical video applications, count on Ace 800 to provide a continuous video feed and clean, HD picture quality. An intelligent RF design enables you to transmit over the 5GHz band in even the most challenging production environments.</p>
<h4> </h4>
<p>BUILT FOR CONTENT CREATION Connect Ace 800 to any camera via SDI for a compact, lightweight wireless setup that enables greater mobility so you can capture tricky shots with ease.</p>
<h4>MONITORING FOR ALL</h4>
<p>Send 1080p60 video from one transmitter to up to four receivers* simultaneously and let your crew and clients monitor every shot as it happens.</p>
<p><small>*Only compatible with Ace 800 RXs</small></p>
<h4>DESIGNED FOR DURABILITY</h4>
<p>With a durable aluminum-milled chassis and 2-pin locking power connector, Ace 800 is ready to take on the elements - from in-studio to run-and-gun productions.</p>
<h4>DESIGNED FOR ANY RIG</h4>
<p>To adapt to whatever your rig requires, Ace 800 features three built-in ¼-20” mounting points for camera arms or hot shoes, and an optional mounting bracket.</p>
<h4>PROFESSIONAL POWER</h4>
<p>Keep your Ace powered with optional battery plates* that attach directly to your transmitter. Power your receiver with optional Gold or V-Mount battery plates.</p>
<p><small>*Optional in dual Sony L-Series and Canon LP-E6, BP-U, and BP-9</small></p>
<h4>ROBUST ANTENNA DESIGN</h4>
<p>External antennas on the TX and RX ensure a more robust wireless performance and greater signal diversity for a consistent video feed in variable production environments.</p>
<h4>WIRELESS VIDEO FOR ANY APPLICATION</h4>
<p>Whether you need to receive video in the palm of your hands or input to a video switcher, Ace 800 has you covered with SDI and HDMI outputs. Trust your wireless link even on large sets or in tough production conditions. With flexible outputs and a compact chassis, Ace 800 makes it easy and affordable to integrate wireless video onto any set.</p>
<ul>
<li>Zero-delay wireless video Transmitter/Receiver Set</li>
<li>Send 1080p60 video, zero delay</li>
<li>Transmits to up to four receivers* simultaneously</li>
<li>Up to 800 ft. of range</li>
<li>Features three built-in ¼-20” mounting points</li>
<li>Durable aluminum-milled chassis and 2-pin locking power connector</li>
</ul>
<p><small>*Only compatible with Ace 800 RXs</small><br /><small>Please Note: Not compatible with other Teradek Bolt or Ace products.</small></p>
Protective Case for Bolt 500 XT / LT
TER-BIT303
Protective Case for Bolt 500 XT or Bolt 500 LT (1 TX, 2 RX)
Teradek
<ul>
<li>Protective Case for Bolt 500 XT or Bolt 500 LT (1 TX, 2 RX)</li>
<li>Waterproof and dust tight design</li>
<li>Molded-in hinge for added protection</li>
<li>Trigger release latch system</li>
<li>Snap-down rubber over-molded cushion grip handle</li>
<li>Ambient pressure equalization valve</li>
<li>Resistant to UV, solvents, corrosion, fungus</li>
<li>Resistant to impact damage</li>
</ul>
BIT-848
TER-BIT848
L Bracket Battery Adapter Plates (Battery to 5.5mm x 2.1mm DC Barrel Connector)
Teradek
<p>Power your <a href="/Teradek/Ace+500+HDMI+TX">Ace 500 transmitter</a> or <a href="/Teradek/Ace+500+HDMI+RX">receiver</a> using this dual mount battery plate. The plate attaches to the bottom of the transmitter or receiver using two 4-40 screws. <br />The Sony L-series/Canon LP-E6 Bidirectional Battery Plate is compatible with BOTH Sony L-Series Batteries and Canon LP-E6 batteries.</p>
<ul>
<li>L Bracket Battery Adapter Plates (Battery to 5.5mm x 2.1mm DC Barrel Connector)</li>
</ul>
Orbit PTZ 4K
TER-10-2560
4K 12G-SDI/HDMI Camera Control Tally - Wireless TX/RX Set
Teradek
<p>Transmit zero-delay, uncompressed, 4Kp60 video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>4K Wireless Video & Control for PTZ Cameras</h4>
<p>Transmit zero-delay, uncompressed, 4Kp60 video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>Reliable, Efficient Wireless Transmission</h4>
<p>Orbit PTZ uses Teradek’s patented Joint Source Channel Coding (JSCC), and MIMO and OFDM technologies, to transmit video over the unlicensed 5GHz band and 4.9GHz public safety band. This enables far better channel utilization and handling of interference than competing H.264 / HEVC transmission methods.</p>
<h4>Real-Time Camera Control</h4>
<p>Orbit PTZ features RS-232 and RS-422 connectivity for PTZ camera control. Camera commands travel over a zero-latency wireless link between transmitter and receiver, with support for VISCA and Panasonic AW protocols. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed!</p>
<h4>Unbreakable Encryption</h4>
<p>Orbit PTZ offers the industry’s best protection against prying eyes with AES-256 encryption and RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<h4>Easy Mobile Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Teradek Control app for iOS and Android. Pair transmitters and receivers with the touch of a button.</p>
<ul>
<li>Wireless 4K / HD HDR video with < 1 ms latency</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Up to 1,000 ft. of wireless range</li>
<li>License-free 5GHz operation</li>
<li>Transmit PTZ camera control commands via RS-232 and RS-422</li>
<li>AES-256 and RSA 1024 encryption</li>
<li>Supports all standard resolutions and frame rates, including HD and up to 4K60</li>
<li>Integrated tally light</li>
</ul>
Orbit PTZ 4K - TX
TER-10-2566
4K 12G-SDI/HDMI Camera Control Tally - Wireless TX
Teradek
<p>Transmit zero-delay, uncompressed, 4Kp60 video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>4K Wireless Video & Control for PTZ Cameras</h4>
<p>Transmit zero-delay, uncompressed, 4Kp60 video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>Reliable, Efficient Wireless Transmission</h4>
<p>Orbit PTZ uses Teradek’s patented Joint Source Channel Coding (JSCC), and MIMO and OFDM technologies, to transmit video over the unlicensed 5GHz band and 4.9GHz public safety band. This enables far better channel utilization and handling of interference than competing H.264 / HEVC transmission methods.</p>
<h4>Real-Time Camera Control</h4>
<p>Orbit PTZ features RS-232 and RS-422 connectivity for PTZ camera control. Camera commands travel over a zero-latency wireless link between transmitter and receiver, with support for VISCA and Panasonic AW protocols. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed!</p>
<h4>Unbreakable Encryption</h4>
<p>Orbit PTZ offers the industry’s best protection against prying eyes with AES-256 encryption and RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<h4>Easy Mobile Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Teradek Control app for iOS and Android. Pair transmitters and receivers with the touch of a button.</p>
<ul>
<li>Wireless 4K / HD HDR video with < 1 ms latency</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Up to 1,000 ft. of wireless range</li>
<li>License-free 5GHz operation</li>
<li>Transmit PTZ camera control commands via RS-232 and RS-422</li>
<li>AES-256 and RSA 1024 encryption</li>
<li>Supports all standard resolutions and frame rates, including HD and up to 4K60</li>
<li>Integrated tally light</li>
</ul>
Orbit PTZ 4K - RX
TER-10-2567
4K 12G-SDI/HDMI Camera Control Tally - Wireless RX
Teradek
<p>Transmit zero-delay, uncompressed, 4Kp60 video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>4K Wireless Video & Control for PTZ Cameras</h4>
<p>Transmit zero-delay, uncompressed, 4Kp60 video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>Reliable, Efficient Wireless Transmission</h4>
<p>Orbit PTZ uses Teradek’s patented Joint Source Channel Coding (JSCC), and MIMO and OFDM technologies, to transmit video over the unlicensed 5GHz band and 4.9GHz public safety band. This enables far better channel utilization and handling of interference than competing H.264 / HEVC transmission methods.</p>
<h4>Real-Time Camera Control</h4>
<p>Orbit PTZ features RS-232 and RS-422 connectivity for PTZ camera control. Camera commands travel over a zero-latency wireless link between transmitter and receiver, with support for VISCA and Panasonic AW protocols. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed!</p>
<h4>Unbreakable Encryption</h4>
<p>Orbit PTZ offers the industry’s best protection against prying eyes with AES-256 encryption and RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<h4>Easy Mobile Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Teradek Control app for iOS and Android. Pair transmitters and receivers with the touch of a button.</p>
<ul>
<li>Wireless 4K / HD HDR video with < 1 ms latency</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Up to 1,000 ft. of wireless range</li>
<li>License-free 5GHz operation</li>
<li>Transmit PTZ camera control commands via RS-232 and RS-422</li>
<li>AES-256 and RSA 1024 encryption</li>
<li>Supports all standard resolutions and frame rates, including HD and up to 4K60</li>
<li>Integrated tally light</li>
</ul>
Orbit PTZ HD
TER-10-2550
HD 3G-SDI/HDMI Camera Control Tally - Wireless TX/RX Set
Teradek
<p>Transmit zero-delay, uncompressed, HD video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>HD Wireless Video & Control for PTZ Cameras</h4>
<p>Transmit zero-delay, uncompressed, HD video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>Reliable, Efficient Wireless Transmission</h4>
<p>Orbit PTZ uses Teradek’s patented Joint Source Channel Coding (JSCC), and MIMO and OFDM technologies, to transmit video over the unlicensed 5GHz band and 4.9GHz public safety band. This enables far better channel utilization and handling of interference than competing H.264 / HEVC transmission methods.</p>
<h4>Real-Time Camera Control</h4>
<p>Orbit PTZ features RS-232 and RS-422 connectivity for PTZ camera control. Camera commands travel over a zero-latency wireless link between transmitter and receiver, with support for VISCA and Panasonic AW protocols. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed!</p>
<h4>Unbreakable Encryption</h4>
<p>Orbit PTZ offers the industry’s best protection against prying eyes with AES-256 encryption and RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<h4>Easy Mobile Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Teradek Control app for iOS and Android. Pair transmitters and receivers with the touch of a button.</p>
<ul>
<li>Wireless HD HDR video with < 1 ms latency</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Up to 1,000 ft. of wireless range</li>
<li>License-free 5GHz operation</li>
<li>Transmit PTZ camera control commands via RS-232 and RS-422</li>
<li>AES-256 and RSA 1024 encryption</li>
<li>Supports all standard HD resolutions and frame rates</li>
<li>Integrated tally light</li>
</ul>
Orbit PTZ HD - TX
TER-10-2551
HD 3G-SDI/HDMI Camera Control Tally - Wireless TX
Teradek
<p>Transmit zero-delay, uncompressed, HD video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>HD Wireless Video & Control for PTZ Cameras</h4>
<p>Transmit zero-delay, uncompressed, HD video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>Reliable, Efficient Wireless Transmission</h4>
<p>Orbit PTZ uses Teradek’s patented Joint Source Channel Coding (JSCC), and MIMO and OFDM technologies, to transmit video over the unlicensed 5GHz band and 4.9GHz public safety band. This enables far better channel utilization and handling of interference than competing H.264 / HEVC transmission methods.</p>
<h4>Real-Time Camera Control</h4>
<p>Orbit PTZ features RS-232 and RS-422 connectivity for PTZ camera control. Camera commands travel over a zero-latency wireless link between transmitter and receiver, with support for VISCA and Panasonic AW protocols. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed!</p>
<h4>Unbreakable Encryption</h4>
<p>Orbit PTZ offers the industry’s best protection against prying eyes with AES-256 encryption and RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<h4>Easy Mobile Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Teradek Control app for iOS and Android. Pair transmitters and receivers with the touch of a button.</p>
<ul>
<li>Wireless HD HDR video with < 1 ms latency</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Up to 1,000 ft. of wireless range</li>
<li>License-free 5GHz operation</li>
<li>Transmit PTZ camera control commands via RS-232 and RS-422</li>
<li>AES-256 and RSA 1024 encryption</li>
<li>Supports all standard HD resolutions and frame rates</li>
<li>Integrated tally light</li>
</ul>
Orbit PTZ HD - RX
TER-10-2552
HD 3G-SDI/HDMI Camera Control Tally - Wireless RX
Teradek
<p>Transmit zero-delay, uncompressed, HD video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>HD Wireless Video & Control for PTZ Cameras</h4>
<p>Transmit zero-delay, uncompressed, HD video and camera control commands over a range of up to 1,000 ft. (305m). Orbit PTZ mounts beneath any PTZ camera and includes a looping power supply, giving you a seamless, long-range wireless solution for quick deployment and cable-free workflows.</p>
<h4>Reliable, Efficient Wireless Transmission</h4>
<p>Orbit PTZ uses Teradek’s patented Joint Source Channel Coding (JSCC), and MIMO and OFDM technologies, to transmit video over the unlicensed 5GHz band and 4.9GHz public safety band. This enables far better channel utilization and handling of interference than competing H.264 / HEVC transmission methods.</p>
<h4>Real-Time Camera Control</h4>
<p>Orbit PTZ features RS-232 and RS-422 connectivity for PTZ camera control. Camera commands travel over a zero-latency wireless link between transmitter and receiver, with support for VISCA and Panasonic AW protocols. Pair transmitters and receivers with the touch of a button, monitor channel interference, set operating frequencies, and control your PTZ cameras directly from the app, no cables needed!</p>
<h4>Unbreakable Encryption</h4>
<p>Orbit PTZ offers the industry’s best protection against prying eyes with AES-256 encryption and RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<h4>Easy Mobile Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Teradek Control app for iOS and Android. Pair transmitters and receivers with the touch of a button.</p>
<ul>
<li>Wireless HD HDR video with < 1 ms latency</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Up to 1,000 ft. of wireless range</li>
<li>License-free 5GHz operation</li>
<li>Transmit PTZ camera control commands via RS-232 and RS-422</li>
<li>AES-256 and RSA 1024 encryption</li>
<li>Supports all standard HD resolutions and frame rates</li>
<li>Integrated tally light</li>
</ul>
BIT-759
TER-BIT759
L Bracket Battery Adapter Plates (Battery to 2-Pin Connector)
Teradek
<p>For those times when you are unable to use a PTap or 2-pin power source at the camera or monitor, there are many options for powering your Transmitter or receiver with its own battery.</p>
<p>Options are available for small-format Canon, Sony, Panasonic, or JVC batteries. All plates feature a 2-pin power cable for output to your transmitter. <br />Includes 2x 4-40 mounting screws.</p>
<p>This Battery Plate mounts directly onto the bottom of all Bolt Transmitters/Receivers, ServPro, Cube 700 Series, Cube 600 Series or COLR to charge/power with camera batteries. Power from the adapter plate is provided by an attached break-out 2pin connector.</p>
<p>The Sony L-series/Canon LP-E6 Bidirectional Battery Plate is compatible with BOTH Sony L-Series Batteries and Canon LP-E6 batteries.</p>
<ul>
<li>L Bracket Battery Adapter Plates (Battery to 2-Pin Connector)</li>
<li>Mounts directly onto the bottom of all Bolt Transmitters/Receivers</li>
<li>Compatible with BOTH Sony L-Series Batteries and Canon LP-E6 batteries</li>
</ul>
Ranger HD Transceiver Set
TER-10-2510-G
HD 3G-SDI/HDMI Wireless TX/RX 1500ft Range - Gold Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Ranger HD Wireless TX/RX - 1500ft Range</li>
<li>Wireless 1080p60 HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Supports a directional antenna for superb wireless performance (sold separately)</li>
<li>Up to 1,500 ft. of range line of sight</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidth</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Ranger HD TX/RX</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger HD Transceiver Set
TER-10-2510-V
HD 3G-SDI/HDMI Wireless TX/RX 1500ft Range - V-Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Ranger HD Wireless TX/RX - 1500ft Range</li>
<li>Wireless 1080p60 HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Supports a directional antenna for superb wireless performance (sold separately)</li>
<li>Up to 1,500 ft. of range line of sight</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidth</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Ranger HD TX/RX</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger HD Transmitter
TER-10-2511-V
HD 3G-SDI/HDMI Wireless TX - V-Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Ranger HD Wireless TX/RX - 1500ft Range</li>
<li>Wireless 1080p60 HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Supports a directional antenna for superb wireless performance (sold separately)</li>
<li>Up to 1,500 ft. of range line of sight</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidth</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Ranger HD TX/RX</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger HD Transmitter
TER-10-2511-G
HD 3G-SDI/HDMI Wireless TX - Gold Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Ranger HD Wireless TX/RX - 1500ft Range</li>
<li>Wireless 1080p60 HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Supports a directional antenna for superb wireless performance (sold separately)</li>
<li>Up to 1,500 ft. of range line of sight</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidth</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Ranger HD TX/RX</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger HD Receiver
TER-10-2512-G
HD 3G-SDI/HDMI Wireless RX - Gold Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Ranger HD Wireless TX/RX - 1500ft Range</li>
<li>Wireless 1080p60 HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Supports a directional antenna for superb wireless performance (sold separately)</li>
<li>Up to 1,500 ft. of range line of sight</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidth</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Ranger HD TX/RX</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger HD Receiver
TER-10-2512-V
HD 3G-SDI/HDMI Wireless RX - V-Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Ranger HD Wireless TX/RX - 1500ft Range</li>
<li>Wireless 1080p60 HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Supports a directional antenna for superb wireless performance (sold separately)</li>
<li>Up to 1,500 ft. of range line of sight</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidth</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger HD 3G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case Large - Ranger HD TX/RX</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger 4K Transceiver Set
TER-10-2520-G
4K 12G-SDI/HDMI Wireless TX/RX - Gold Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>Ranger is the world’s first zero-delay (< 1 ms) wireless video system to transmit uncompressed 4K HDR video up to 5,000 ft. line of sight. With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Wireless 4K (2160p60) HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Directional antenna for superb wireless performance</li>
<li>Up to 3,000 ft. of wireless range or 5,000 ft. with panel antenna (included)</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidths</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Broadcast-capable</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Antenna Array Plate 3rd Gen Gold Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>5x RP-SMA Male to RP-SMA Male 4in/10cm Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case XL - Ranger 4K TX/RX and Antenna Array</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger 4K Transmitter
TER-10-2521-G
4K 12G-SDI/HDMI Wireless TX - Gold Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>Ranger is the world’s first zero-delay (< 1 ms) wireless video system to transmit uncompressed 4K HDR video up to 5,000 ft. line of sight. With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Wireless 4K (2160p60) HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Directional antenna for superb wireless performance</li>
<li>Up to 3,000 ft. of wireless range or 5,000 ft. with panel antenna (included)</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidths</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Broadcast-capable</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Antenna Array Plate 3rd Gen Gold Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>5x RP-SMA Male to RP-SMA Male 4in/10cm Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case XL - Ranger 4K TX/RX and Antenna Array</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger 4K Transceiver Set
TER-10-2520-V
4K 12G-SDI/HDMI Wireless TX/RX - V-Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>Ranger is the world’s first zero-delay (< 1 ms) wireless video system to transmit uncompressed 4K HDR video up to 5,000 ft. line of sight. With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Wireless 4K (2160p60) HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Directional antenna for superb wireless performance</li>
<li>Up to 3,000 ft. of wireless range or 5,000 ft. with panel antenna (included)</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidths</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Broadcast-capable</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Antenna Array Plate 3rd Gen Gold Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>5x RP-SMA Male to RP-SMA Male 4in/10cm Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case XL - Ranger 4K TX/RX and Antenna Array</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger 4K Transmitter
TER-10-2521-V
4K 12G-SDI/HDMI Wireless TX - V-Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>Ranger is the world’s first zero-delay (< 1 ms) wireless video system to transmit uncompressed 4K HDR video up to 5,000 ft. line of sight. With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Wireless 4K (2160p60) HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Directional antenna for superb wireless performance</li>
<li>Up to 3,000 ft. of wireless range or 5,000 ft. with panel antenna (included)</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidths</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Broadcast-capable</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Antenna Array Plate 3rd Gen Gold Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>5x RP-SMA Male to RP-SMA Male 4in/10cm Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case XL - Ranger 4K TX/RX and Antenna Array</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger 4K Receiver
TER-10-2522-G
4K 12G-SDI/HDMI Wireless RX - Gold Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>Ranger is the world’s first zero-delay (< 1 ms) wireless video system to transmit uncompressed 4K HDR video up to 5,000 ft. line of sight. With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Wireless 4K (2160p60) HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Directional antenna for superb wireless performance</li>
<li>Up to 3,000 ft. of wireless range or 5,000 ft. with panel antenna (included)</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidths</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Broadcast-capable</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Antenna Array Plate 3rd Gen Gold Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>5x RP-SMA Male to RP-SMA Male 4in/10cm Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case XL - Ranger 4K TX/RX and Antenna Array</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Ranger 4K Receiver
TER-10-2522-V
4K 12G-SDI/HDMI Wireless RX - V-Mount
Teradek
<h4>Next-Level Wireless Performance</h4>
<p>Ranger is the world’s first zero-delay (< 1 ms) wireless video system to transmit uncompressed 4K HDR video up to 5,000 ft. line of sight. With best-in-class performance in challenging RF conditions and a wide operating range from 4.9 GHz to 6.0 GHz, Ranger offers live productions the ultimate combination of incredible video quality and wireless integrity.</p>
<h4>Power Through Interference</h4>
<p>Teradek's patented Joint Source Channel Coding (JSCC) technology, utilizing MIMO and OFDM, enables the transmission of uncompressed, 10-bit, 4:2:2 video at less than 1 millisecond of delay. Ranger’s exclusive RF design is UNII-5 ready and utilizes 40 MHz / 20 MHz channels with far greater efficiency than H.264 / HEVC encoding solutions and offers better performance in the noisiest environments.</p>
<h4>Easy Smartphone Configuration</h4>
<p>Command your wireless workflow from the palm of your hand with the Launchpad app for iOS and Android. Pair transmitters and receivers with the touch of a button, monitor channel interference, and set operating frequencies directly from the app, no cables needed.</p>
<h4>Unbreakable Encryption</h4>
<p>Ranger offers the industry’s best protection against prying eyes with AES-256 encryption using RSA 1024 key pairing. Combined, these two technologies ensure nobody can decrypt your wireless feed or connect another receiver to your system without explicit authorization.</p>
<ul>
<li>Wireless 4K (2160p60) HDR video</li>
<li>Zero-delay (< 1 ms)</li>
<li>Uncompressed, 10-bit, 4:2:2 image quality</li>
<li>Directional antenna for superb wireless performance</li>
<li>Up to 3,000 ft. of wireless range or 5,000 ft. with panel antenna (included)</li>
<li>4.9 GHz to 6.0 GHz operation</li>
<li>UNII-5 ready</li>
<li>40 MHz / 20 MHz channel bandwidths</li>
<li>AES-256 encryption using RSA 1024 key exchange protocol</li>
<li>Manual and automatic frequency selection</li>
<li>Broadcast-capable</li>
<li>Multicast-capable up to 6 receivers</li>
</ul>
<ul>
<li>1x Antenna Array Plate 3rd Gen Gold Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless TX Gold-Mount</li>
<li>1x Ranger 4K 12G-SDI/HDMI - Wireless RX Gold-Mount</li>
<li>4x Battery Slot Cover</li>
<li>1x Lightstand Adapter 1/4-20in</li>
<li>4x Screw Flat Head Phillips Black SS M2 x 4mm</li>
<li>1x (Bit 118) 2pin Conn. to PowerTap - 18in Cable</li>
<li>1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable</li>
<li>2x Ultra Thin HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>5x RP-SMA Male to RP-SMA Male 4in/10cm Cable</li>
<li>2x SDI 12G BNC to BNC Cable Length: 18in / 46cm</li>
<li>1x Teradek Case XL - Ranger 4K TX/RX and Antenna Array</li>
<li>1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable</li>
<li>3x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)</li>
<li>2x Antenna H Mushroom</li>
<li>1x Antenna H N-type Barrel</li>
<li>1x Antenna V N-type Barrel</li>
<li>1x Teradek Standard Terms and Conditions</li>
<li>1x Insert - Product Register</li>
<li>1x Quickstart Guide - Ranger 4K/HD</li>
</ul>
Prism 853
TER-10-2853
4K 10bit HEVC/AVC 12G-SDI Encoder Card for Prism
Teradek
<p>Industry leading, low-latency blade encoder for Prism <a href="/Teradek/Prism+1100">1RU</a> and <a href="/Teradek/Prism+1200">2RU</a> rack mount systems. Supports 4K, 10-bit, 4:2:2 video encoding in a high density format. Can transmit video to Prism, Cube, Slice, Core, and T-Rax decoders.</p>
<ul>
<li>4K 10bit HEVC/AVC 12G-SDI Encoder Card for Prism</li>
<li>Designed for Prism Rack Base System</li>
<li>HEVC / H.264 compression</li>
<li>Supports encoding up to 2160p60</li>
<li>HDR ready: 10-bit, 4:2:2</li>
<li>Protocols: SRT, MPEG-TS, RTMP(S)</li>
<li>12G-SDI input and looping output</li>
<li>3.5mm analog audio input and output</li>
</ul>
<ul>
<li>1x Prism 853 4K 10bit HEVC/AVC 12G-SDI Encoder Card</li>
<li>1x Audio/Video Backplate</li>
</ul>
Prism 873
TER-10-2873
4K 10bit HEVC/AVC 12G-SDI Decoder Card for Prism
Teradek
<p>Industry leading, low-latency blade decoder for Prism <a href="/Teradek/Prism+1100">1RU</a> and <a href="/Teradek/Prism+1200">2RU</a> rack mount systems. Supports 4K, 10-bit, 4:2:2 video decoding in a high density format. Can receive video from Prism, Cube, Slice, Core, and T-Rax encoders.</p>
<ul>
<li>4K 10bit HEVC/AVC 12G-SDI Decoder Card for Prism</li>
<li>Designed for Prism Rack Base System</li>
<li>HEVC / H.264 compression</li>
<li>Supports decoding up to 2160p60</li>
<li>HDR ready: 10-bit, 4:2:2</li>
<li>Protocols: SRT, MPEG-TS 2x</li>
<li>12G-SDI outputs</li>
<li>3.5mm analog audio input and output</li>
</ul>
<ul>
<li>1x Prism 873 4K 10bit HEVC/AVC 12G-SDI Decoder Card</li>
<li>1x Audio/Video Backplate</li>
</ul>
Bolt 4K LT 750 Transceiver Set
TER-10-2200
Bolt 4K LT 3G-SDI/HDMI Wireless TX/RX - Range 750ft
Teradek
<p>Teradek’s most powerful compact system yet. Featherlight body weight with heavyweight strength, so you can fly at the speed of cinema. Entirely HDR. Zero delay.</p>
<h4>Increased Agility</h4>
<p>Small form factor and lighter weight enable greater freedom of movement</p>
<h4>Added Value</h4>
<p>Improved feature set from previous Bolt generations at the same introductory price</p>
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send and receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 3G-SDI/HDMI Wireless TX/RX - Range 750ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 750</li>
<li>1x Bolt 4K LT RX 750</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 750 Transmitter
TER-10-2201
Bolt 4K LT 750 3G-SDI / HDMI Wireless TX
Teradek
<p>Teradek’s most powerful compact system yet. Featherlight body weight with heavyweight strength, so you can fly at the speed of cinema. Entirely HDR. Zero delay.</p>
<h4>Increased Agility</h4>
<p>Small form factor and lighter weight enable greater freedom of movement</p>
<h4>Added Value</h4>
<p>Improved feature set from previous Bolt generations at the same introductory price</p>
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send and receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 3G-SDI/HDMI Wireless TX/RX - Range 750ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 750</li>
<li>1x Bolt 4K LT RX 750</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 1500 Transceiver Set
TER-10-2210
Bolt 4K LT 1500 3G-SDI/HDMI Wireless TX/RX - Range 1500ft
Teradek
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 1500ft (457m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send or receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 1500 3G-SDI/HDMI Wireless TX/RX - Range 1500ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 1500</li>
<li>1x Bolt 4K LT RX 1500</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 750 Receiver
TER-10-2202
3G-SDI/HDMI Wireless Video Receiver - 7500ft
Teradek
<p>Teradek’s most powerful compact system yet. Featherlight body weight with heavyweight strength, so you can fly at the speed of cinema. Entirely HDR. Zero delay.</p>
<h4>Increased Agility</h4>
<p>Small form factor and lighter weight enable greater freedom of movement</p>
<h4>Added Value</h4>
<p>Improved feature set from previous Bolt generations at the same introductory price</p>
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send and receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 3G-SDI/HDMI Wireless TX/RX - Range 750ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 750</li>
<li>1x Bolt 4K LT RX 750</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 750 Receiver V-Mount
TER-10-2202-V
3G-SDI/HDMI Wireless Video Receiver - 750ft V-Mount
Teradek
<p>Teradek’s most powerful compact system yet. Featherlight body weight with heavyweight strength, so you can fly at the speed of cinema. Entirely HDR. Zero delay.</p>
<h4>Increased Agility</h4>
<p>Small form factor and lighter weight enable greater freedom of movement</p>
<h4>Added Value</h4>
<p>Improved feature set from previous Bolt generations at the same introductory price</p>
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send and receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 3G-SDI/HDMI Wireless TX/RX - Range 750ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 750</li>
<li>1x Bolt 4K LT RX 750</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 750 Receiver Gold Mount
TER-10-2202-G
3G-SDI/HDMI Wireless Video Receiver - 750ft Gold Mount
Teradek
<p>Teradek’s most powerful compact system yet. Featherlight body weight with heavyweight strength, so you can fly at the speed of cinema. Entirely HDR. Zero delay.</p>
<h4>Increased Agility</h4>
<p>Small form factor and lighter weight enable greater freedom of movement</p>
<h4>Added Value</h4>
<p>Improved feature set from previous Bolt generations at the same introductory price</p>
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send and receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 3G-SDI/HDMI Wireless TX/RX - Range 750ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 750</li>
<li>1x Bolt 4K LT RX 750</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 1500 Receiver
TER-10-2212
3G-SDI/HDMI Wireless Video Receiver - 1500ft
Teradek
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 1500ft (457m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send or receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 1500 3G-SDI/HDMI Wireless TX/RX - Range 1500ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 1500</li>
<li>1x Bolt 4K LT RX 1500</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 1500 Receiver V-Mount
TER-10-2212-V
3G-SDI/HDMI Wireless Video Receiver - 1500ft V-Mount
Teradek
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 1500ft (457m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send or receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 1500 3G-SDI/HDMI Wireless TX/RX - Range 1500ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 1500</li>
<li>1x Bolt 4K LT RX 1500</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 1500 Receiver Gold Mount
TER-10-2212-G
3G-SDI/HDMI Wireless Video Receiver - 1500ft Gold Mount
Teradek
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 1500ft (457m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send or receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 1500 3G-SDI/HDMI Wireless TX/RX - Range 1500ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 1500</li>
<li>1x Bolt 4K LT RX 1500</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 1500 Transmitter
TER-10-2211
3G-SDI/HDMI Wireless Video Transmitter - 1500ft
Teradek
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 1500ft (457m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send or receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 1500 3G-SDI/HDMI Wireless TX/RX - Range 1500ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 1500</li>
<li>1x Bolt 4K LT RX 1500</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 1500 Gold Mount Deluxe Kit
TER-10-2210-G
Bolt 4K LT 1500 3G-SDI/HDMI Deluxe Kit - Gold Mount
Teradek
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 1500ft (457m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send or receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 1500 3G-SDI/HDMI Wireless TX/RX - Range 1500ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 1500</li>
<li>1x Bolt 4K LT RX 1500</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 1500 V-Mount Deluxe Kit
TER-10-2210-V
Bolt 4K LT 1500 3G-SDI/HDMI Deluxe Kit - V-Mount
Teradek
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 1500ft (457m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send or receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 1500 3G-SDI/HDMI Wireless TX/RX - Range 1500ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 1500</li>
<li>1x Bolt 4K LT RX 1500</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 750 V-Mount Deluxe Kit
TER-10-2200-V
Bolt 4K LT 750 3G-SDI/HDMI Deluxe Kit - V-Mount
Teradek
<p>Teradek’s most powerful compact system yet. Featherlight body weight with heavyweight strength, so you can fly at the speed of cinema. Entirely HDR. Zero delay.</p>
<h4>Increased Agility</h4>
<p>Small form factor and lighter weight enable greater freedom of movement</p>
<h4>Added Value</h4>
<p>Improved feature set from previous Bolt generations at the same introductory price</p>
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Transmit and receive images up to 4Kp30 via HDMI at a line-of-sight distance of up to 750ft (228m) with no image delay (>0.001sec).</p>
<h4>Transmitter:</h4>
<p>Input: 1x HDMI 2.0 (up to 4Kp30), 1x 3G-SDI (up to 1080p60)<br />Output: 1x 3G-SDI (up to 1080p60)</p>
<h4>Receiver:</h4>
<p>Output: 1x HDMI 2.0 (up to 4Kp30), 2x 3G-SDI (up to 1080p60)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Send and receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal transmission and reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Send Signal up to 6 Receivers</h4>
<p>Link up to 6 RX receivers to any 1 TX transmitter to enable multiple points of viewing.</p>
<h4>Lightweight Body with Versatile Mounting</h4>
<p>TX Mounting: M3 / ¼”-20<br />RX Mounting: M3 / ¼”-20 / ⅜”x16</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Send and receive signals between any Bolt 4K series of devices for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul>
<li>Bolt 4K LT 3G-SDI/HDMI Wireless TX/RX - Range 750ft</li>
<li>Zero-Delay 4K Wireless Video</li>
<li>True HDR</li>
<li>Compatibility: All Bolt 4K RX Devices</li>
<li>Outputs: HDMI 2.0, 3G-SDI</li>
<li>Video: Up to 4Kp30 / 1080p60</li>
</ul>
<ul>
<li>1x Bolt 4K LT TX 750</li>
<li>1x Bolt 4K LT RX 750</li>
<li>1x Teradek Case L</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
</ul>
Bolt 4K LT 750 Gold Mount Deluxe Kit
TER-10-2200-G
Bolt 4K LT 750 3G-SDI/HDMI Deluxe Kit - Gold Mount
Teradek
<ul>
<li>1x Bolt 4K LT TX 750</li>
<li>1x Bolt 4K LT RX 750 Gold Mount</li>
<li>2x Bolt 4K RX Battery Cover</li>
<li>1x Teradek Case XL</li>
<li>1x Light Stand Adapter ¼”-20</li>
<li>1x Hot Shoe Adapter</li>
<li>1x V-Lock Base Station and Wedge Kit (ARRI Accessory Mount ⅜”-16)</li>
<li>2x Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in</li>
<li>1x 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in</li>
<li>1x 2pin to 2pin Connector Cable (Alexa) - 18in</li>
<li>1x Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in</li>
<li>2x 3G-SDI (BNC to BNC) Cable - 10in</li>
<li>1x 18 Watt AC Adapter Cable (2-Pin Connector) - 6ft</li>
<li>7x TX/RX Antenna (2dBi WIFI 2.4/5.8GHz, Small)</li>
<li>1x Teradek Standard Terms and Conditions</li>
</ul>
Bolt 4K RX Monitor Module V-Mount
TER-10-2139-V7
Bolt 4K RX Monitor Module for Cine 7 and 702 Touch - V-Mount
Teradek
<h4>Integrated Hardware Addition to SmallHD Cine 7 and 702 Touch Monitors</h4>
<p>RX Module easily attaches to the back of Cine 7 and 702 Touch. Includes a V-Mount Battery Plate capable of battery power pass-through to both RX Module and monitor.</p>
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Receive images up to 4Kp30 at a line-of-sight distance of up to 750ft (228m) with no image latency (>0.001sec).</p>
<p>Output: 1x HDMI 2.0 (up to 4Kp30)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Receive signal from any Bolt 4K series TX device for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools</p>
<ul>
<li>Bolt 4K RX Monitor Module for Cine 7 and 702 Touch - V-Mount</li>
<li>Easily attaches to the back of <a href="/SmallHD/Cine+7+V-Mount">Cine 7</a> and <a href="/SmallHD/702+Touch">702 Touch</a></li>
<li>Includes a V-Mount Battery Plate capable of battery power pass-through to both RX Module and monitor</li>
<li>True HDR</li>
<li>Universal Cross-Compatibility between all Bolt 4K Devices</li>
<li>Transmit metadata, timecode, and start/stop flags from most camera manufacturers</li>
</ul>
<ul>
<li>1 RX Monitor Module (V-Mount)</li>
</ul>
Bolt 4K RX Monitor Module Gold Mount
TER-10-2139-G7
Bolt 4K RX Monitor Module for Cine 7 and 702 Touch - Gold Mount
Teradek
<h4>Integrated Hardware Addition to SmallHD Cine 7 and 702 Touch Monitors</h4>
<p>RX Module easily attaches to the back of Cine 7 and 702 Touch. Includes a Gold Mount Battery Plate capable of battery power pass-through to both RX Module and monitor.</p>
<h4>Zero-Delay 4K Wireless Video</h4>
<p>Receive images up to 4Kp30 at a line-of-sight distance of up to 750ft (228m) with no image latency (>0.001sec).</p>
<p>Output: 1x HDMI 2.0 (up to 4Kp30)</p>
<h4>True HDR</h4>
<p>Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut. Receive Log-enabled camera signals with wide dynamic range in order to monitor and achieve balanced highlight and lowlight regions with accurate color reproduction.</p>
<h4>Improved Wireless Performance</h4>
<p>Reliable signal reception over 13x 40MHz frequencies, with upgraded hardware and less image break-up than previous Bolt generations. Faster reconnection times, automatic signal quality switching, and a more robust frequency hopping algorithm. An additional 5GHz radio frequency link is available for high-traffic locations with excessive interference from other wireless devices.</p>
<h4>Universal Cross-Compatibility between all Bolt 4K Devices</h4>
<p>Receive signal from any Bolt 4K series TX device for expanding workflow requirements.</p>
<h4>Camera Metadata</h4>
<p>Transmit metadata, timecode, and start/stop flags from most camera manufacturers.</p>
<h4>Bolt App for Android and Apple iOS</h4>
<p>Remotely pair any TX/RX devices, manually designate specific 5GHz channels, and monitor interference with the 5GHz Spectrum Analyzer and Wireless Health analysis tools.</p>
<ul style="box-sizing: border-box; margin-top: 0px; margin-bottom: 1rem; background-color: #ffffff; color: #383a35; font-family: 'Acumin Pro', sans-serif; font-size: 16px;">
<li style="box-sizing: border-box;">Bolt 4K RX Monitor Module for Cine 7 and 702 Touch - Gold Mount</li>
<li style="box-sizing: border-box;">Easily attaches to the back of <a href="/SmallHD/Cine+7+Gold+Mount">Cine 7</a> and <a style="font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, Oxygen, Ubuntu, Cantarell, 'Open Sans', 'Helvetica Neue', sans-serif; font-size: medium;" href="/SmallHD/702+Touch">702 Touch</a></li>
<li style="box-sizing: border-box;">Includes a Gold -Mount Battery Plate capable of battery power pass-through to both RX Module and monitor</li>
<li style="box-sizing: border-box;">True HDR</li>
<li style="box-sizing: border-box;">Universal Cross-Compatibility between all Bolt 4K Devices</li>
<li style="box-sizing: border-box;">Transmit metadata, timecode, and start/stop flags from most camera manufacturers</li>
</ul>
<ul>
<li>1 RX Monitor Module (Gold Mount)</li>
</ul>
TOF.1 Rangefinder
TRT-15-0048
Infrared (IR) rangefinder
Teradek
<p>Introducing the TOF.1 Rangefinder for Teradek RT. This small and lightweight, infrared (IR) rangefinder provides constant distance measurements between objects and a camera’s focal plane. Connect your TOF.1 to an <a href="/Teradek+RT/MDR.X">MDR.X Lens Control Receiver</a>, to provide distance readouts on <a href="/Teradek+RT/CTRL.1">CTRL.1</a> or <a href="/Teradek+RT/CTRL.3+Metric">CTRL.3</a> wireless handheld controllers. Precision autofocus with a sensor refresh rate of 60 times per second can be activated on your handheld wireless controller with a simple On/Off toggle button for quick access to automated lens adjustments.</p>
<h4>Powered by Teradek RT Wireless FIZ System</h4>
<ul>
<li>Power + Control with MDR.X Lens Control Receiver</li>
<li>Single 4-pin to 4-pin Control Cable (Teradek RT Motor Cable)</li>
<li>Real-Time Distance Display on CTRL.1, CTRL.3, and SmallHD monitors</li>
</ul>
<p>Control and power for TOF.1 are provided by MDR.X and require only a single Control Cable—the same as Teradek RT Lens Motors. Access configuration tools within the MDR.X menu to accurately calibrate TOF.1. MDR.X radio control with CTRL.1 and CTRL.3 handheld wireless controllers will also communicate TOF.1 distance readouts.</p>
<h4>Hyper-Accurate IR Sensor</h4>
<ul>
<li>Up to 100ft Range (30m)</li>
<li>Detects subjects within a 3° Field of View</li>
</ul>
<p>LED infrared beams measure the distance of subjects within a 3 degree field of view of TOF.1’s proximity sensor, at a direct line-of-sight range of up to 100ft. The overall radius of the sensor’s field of view will narrow or widen as a subject moves toward/away from the camera, allowing a long range of focal detection from macro close-ups to farther distances.</p>
<h4>Responsive Autofocus</h4>
<ul>
<li>Automatic adjustment of Lens Motor</li>
<li>Refresh Rate: 60x per second</li>
<li>Proprietary Motor Smoothing Code</li>
</ul>
<p>Autofocus can be enabled by programming any User Button on CTRL.1 or CTRL.3. Identify and set a focal point and the lens motor will adjust accordingly. TOF.1 refreshes a subject’s distance measurement 60 times a second, with instantaneous adjustments to focal length by the lens motor--faster than the human eye can understand movement. A proprietary smoothing algorithm prevents excessive jitter within the lens motor, so back-and-forth adjustments are blended together with near imperceptibility.</p>
<h4>Customizable SmallHD RT Overlays</h4>
<ul>
<li>Compatible with all SmallHD Monitors running PageOS 4</li>
<li>Communication via interface cable with CTRL.1 and CTRL.3</li>
<li>User-customizable distance overlay size and placement</li>
</ul>
<p>SmallHD’s powerful PageOS 4 software features lens data overlays that display critical follow-focus information. Connect any compatible SmallHD monitor with CTRL.1 or CTRL.3 and activate the RT Overlay option to view TOF.1’s numerical distance readout on-screen. The rangefinder information can be adjusted in size and positioned to anywhere on the monitor’s display, so Camera Assistants can compare lens position and adjust focus with their wireless controller accordingly. For a totally wireless workflow, pair SmallHD monitors with Teradek Bolt 4K wireless video receivers.</p>
<h4>Incredibly Small & Lightweight</h4>
<ul>
<li>¼”-20 Mounting Point for simple camera attachment</li>
<li>58mm x 58mm x 34 mm (2.3in x 2.3in x 1.3in)</li>
<li>125g (4.5oz)</li>
</ul>
<p>You won’t notice it’s mounted to your camera.</p>
<h4>Detachable Laser Sight</h4>
<p>A detachable laser sight (included) can be mounted to the top of TOF via clip-on NATO rail. The activated red laser beam is perfectly centered within TOF.1’s field of view, which allows focus pullers to locate their exact focal point before hitting record.</p>
<ul>
<li>Infrared (IR) rangefinder</li>
<li>Line-of-sight Accuracy up to 80ft (25.4m)</li>
<li>Subject Distance Readouts</li>
<li>Autofocus with Teradek RT</li>
<li>Single cable Power+Control</li>
<li>Detachable Laser Sight</li>
<li>Customizable Distance Overlays on SmallHD Monitors</li>
</ul>
<ul>
<li>1x TOF.1</li>
<li>1x Laser Sight</li>
<li>1x 4-pin to 4-pin Control Cable</li>
</ul>
Vidiu X
TER-10-0235
Ultra-slim HD streaming encoder
Teradek
<h4>Reach Your Audience at the Touch of a Button</h4>
<p>Whether you’re a videographer streaming live events like weddings, or a content creator streaming on multiple platforms, Vidiu X lets you simultaneously go live to Facebook, YouTube, Twitch and more.*<br />That’s less time getting in front of more viewers.</p>
<p><small>* Optional Sharelink subscription required.</small></p>
<h4>The Perfect Streaming Partner</h4>
<p>Unlock professional production quality and broadcast in HD from any HDMI video source. Vidiu X plugs in to professional cameras, switchers, and media players. Simply set it on your desk, and let it shine as a dedicated encoder for your live production needs.</p>
<h4>Portable Powerhouse</h4>
<p>Streaming on-the-go, or from your home base? Vidiu X’s compact size makes it easy to mount to your camera and take it with you, or station it on your production desk. It’s also USB-C powered, which makes it easier than ever to keep your stream up and running throughout the day.</p>
<h4>A Network of Reliability</h4>
<p>Vidiu X gives you 3 ways to keep your streams flowing smoothly. Ethernet for hardline reliability, cellular connectivity with your LTE USB modem for portability, and WiFi 6 for the best wireless connectivity on location. Best of all, Vidiu X can bond* together bandwidth from all of these interfaces, including mobile hotspots, so you can stream reliably from anywhere you go.</p>
<p><small>* Optional Sharelink subscription required.</small></p>
<h4>Stream Smarter with Sharelink</h4>
<p>Never worry about an inconsistent internet connection again. For a small monthly subscription, you can combine bandwidth from WiFi, Ethernet, and cellular sources through network bonding using Sharelink, Teradek’s cloud platform.</p>
<h4>Seamless Setup with the Vidiu App</h4>
<p>Complete control is yours with the Vidiu App for iOS and Android. Configure your destinations, stream settings, and network connections, all from your smart device. You can even monitor the live feed right from the app to ensure everything looks good.</p>
<p>The Vidiu X hardware encoder reliably broadcasts live video from almost any location to multiple streaming platforms – in high-definition, at the touch of a button. It’s compact and portable. It works with cameras and switchers. And uses bonding for stable remote streams.<br />Better streaming never looked so easy. Are you ready to wow your audience?</p>
<ul>
<li>Ultra-slim HD streaming encoder</li>
<li>Stream in AVC/H.264</li>
<li>Compatible with Facebook Live, YouTube Live, and RTMP(S) online video platforms</li>
<li>Video Quality: Up to 1080p60</li>
<li>Configure remotely from the Vidiu App</li>
<li>Stream to multiple destinations via Sharelink*</li>
<li>Internet Inputs: USB for 3G/4G modem support, Ethernet and WiFi</li>
<li>Bonding over 7 simultaneous ports via Sharelink*</li>
<li>HDMI Input / HDMI Output</li>
<li>Super-fast boot-up time (under 10 seconds)</li>
<li>USB-C Power Input</li>
</ul>
<p><small>*Sharelink subscription required.</small></p>
<ul>
<li>1x Vidiu X</li>
<li>1x Hot Shoe Adaptor</li>
<li>1x Ethernet Cable HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable</li>
<li>1x 30W USB-C Power Adapter</li>
</ul>