{"products":[{"productName":"2Core SM UL 100","prodCode":"FCT-2CSM100","shortDes":"2Core Single Mode Ultra Light 100M Fibre Cable","manufacturer":"FieldCast","longDes":"
FieldCast® 2Core fibre cables are able to deliver 4K signals over large distances of 200 meters or more without any signal loss.
The main cable assemblies are usually used for point-to point connections between camera converter and studio converter, couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 2Core is able to deliver 4k signals over large distances of 200 meters or more without any signal loss.
The main cable assemblies are usually used for point-to point connections between camera converter and studio converter, couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 2Core Fibre cables are able to deliver 4K signals over large distances of 100 meters or more without any signal loss.
The main cable assemblies are usually used for point-to point connections between camera converter and studio converter, couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 2Core fibre cables are able to deliver 4K signals over large distances of 200 meters or more without any signal loss.
The main cable assemblies are usually used for point-to point connections between camera converter and studio converter, couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 2Core is able to deliver 4k signals over large distances of 200 meters or more without any signal loss.
The main cable assemblies are usually used for point-to point connections between camera converter and studio converter, couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 2Core is able to deliver 4k signals over large distances of 200 meters or more without any signal loss.
The main cable assemblies are usually used for point-to point connections between camera converter and studio converter, couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 2Core is able to deliver 4k signals over large distances of 200 meters or more without any signal loss.
The main cable assemblies are usually used for point-to point connections between camera converter and studio converter, couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 4Core can transmit several signals via one cable – thus saving a multiplexer.
Other applications would be for remote placement of multiple monitors or for complete KVM solutions.
Couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 4Core can transmit several signals via one cable – thus saving a multiplexer.
Other applications would be for remote placement of multiple monitors or for complete KVM solutions.
Couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 4Core can transmit several signals via one cable – thus saving a multiplexer.
Other applications would be for remote placement of multiple monitors or for complete KVM solutions.
Couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 4Core can transmit several signals via one cable – thus saving a multiplexer.
Other applications would be for remote placement of multiple monitors or for complete KVM solutions.
Couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 4Core can transmit several signals via one cable – thus saving a multiplexer.
Other applications would be for remote placement of multiple monitors or for complete KVM solutions.
Couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 4Core can transmit several signals via one cable – thus saving a multiplexer.
Other applications would be for remote placement of multiple monitors or for complete KVM solutions.
Couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 4Core can transmit several signals via one cable – thus saving a multiplexer.
Other applications would be for remote placement of multiple monitors or for complete KVM solutions.
Couplers, adapters and chassis connectors are available.<\/p>","features":"
FieldCast® 4Core can transmit several signals via one cable – thus saving a multiplexer.
Other applications would be for remote placement of multiple monitors or for complete KVM solutions.
Couplers, adapters and chassis connectors are available.<\/p>","features":"
Panel One is a robust 19 inch rack mount connector panel, to be mounted directly above or below Blackmagic Design Studio Converter™.
Panel One features four Rosenberger OSI Duplex™ chassis connectors: now you can connect four Rosenberger OSI Duplex cable connectors to Blackmagic Design Studio Converter.
Panel One uses connectors with integrated bend-insensitive LC patch cables that connect straight to the fibre connectors of Studio Converter; they are short length to prevent any cable clutter.
Panel One does not change anything to the functionality of Blackmagic Design Studio Converter, it simply bridges from the vulnerable LC standards to the very robust RDC standard.<\/p>","features":"
Adapter One features a custom Rosenberger OSI Duplex™ chassis connector: now you can connect Rosenberger OSI Duplex cable connector straight to Blackmagic Design Camera Converter™.
Adapter One only changes the sensitive LC Duplex connection into a very robust Rosenberger OSI Duplex connection; all features of Camera Converter remain completely unchanged.
Adapter One is a robust all aluminum solution, built around a milled out block completely covering and protecting the vulnerable LC connections to the SFP of Camera Converter.
Adapter One only covers the LC connectors of Camera Converter, leaving all other Camera Converter connectivity completely free and accessible.
Adapter One mounts to the back of Camera Converter using the four taps of its housing; no customizing whatsoever, no drilling, no glueing, and you can use the mounting hole and the belt clip as you did before.<\/p>","features":"
Adapter Two features a custom Rosenberger OSI Duplex™ chassis connector: now you can connect Rosenberger OSI Duplex cable connector straight to Blackmagic Studio Camera.
Adapter Two only changes the sensitive LC Duplex connection into a very robust Rosenberger OSI Duplex connection; all features of studio Camera remain completely unchanged.
Adapter Two is a robust all aluminum solution, built around a milled out block completely covering and protecting the vulnerable LC connections to the SFP of Camera Converter.
Adapter Two only covers the LC connectors of Studio Camera, leaving all other Camera Converter connectivity completely free and accessible.
Adapter Two mounts to the side of Camera Converter.<\/p>","features":"
Get the most out of your Blackmagic Design Camera Converter™ by using the FieldCast fibre optic system.<\/p>\r\n
With FieldCast Adapter One Hybrid you can tap into the world of easy to use fibre optic connectivity and cover any distance between your OB Van and your live camera in the most professional way.<\/p>\r\n
Now you can use your Camera Converter™ and move freely in any environment and without worries about empty batteries! Adapter One Hybrid has the smallest form factor possible and the aluminum design makes it light as a feather.<\/p>\r\n
Adapter One Hybrid is built for studio and field use.<\/p>\r\n
The adapter features a FieldCast 2Core Hybrid Chassis Connector, so you can connect the 2Core SM Hybrid Main Cable<\/a> to it, fast and easy.<\/p>\r\n Fibre optic technology conveying copper for powering the camera, converter and charging its battery.<\/p>\r\n All functionality of Camera Converter is unchanged. The LC Duplex I\/O connection is neatly covered by the milled out aluminum protection block, but all other connectors of the unit are accessible as before, and you can connect your camera and all other gear as you did before.<\/p>\r\n Easily connect the Adapter One Hybrid to Camera Converter, just remove the four screws at the back of the converter, put Adapter One Hybrid in place and screw it all together again, using the four screws that are part of the package.<\/p>\r\n The resulting assembly of converter and adapter feels and behaves as one complete unit, and even the belt clip at the back, with its inserts for connecting to pods, rigs or arms, can be used like before, as if the adapter was not there at all!<\/p>\r\n With Fieldcast Adapter One your ATEM Camera Converter has become sturdy all the way.<\/p>","features":" Adapter Two Hybrid bridges the gap between FieldCast fibre optic cable and Blackmagic Design Studio Camera<\/a>™. It directly mounts to the side of the camera body, connects to the camera SFP with a flexible LC Duplex bridging cable, and powers the camera.<\/p>\r\n With Adapter Two you can transport your HD or 4K video back and forth and control all functions of your Studio Camera™ using only one slim and flexible FieldCast 2Core cable, whatever the distance!<\/p>\r\n Complete camera control over just one fibre optic cable.<\/p>\r\n Move your Studio Camera freely over the studio floor and make use of all the advantages of ATEM camera control using Adapter Two Hybrid with one slim and flexible cable for every camera. Adapter Two Hybrid is a fully passive device, bridging fibre to fibre in the most straightforward way possible, thereby fully powering the cameras with no special tricks. Just keep the connections clean and go.<\/p>\r\n Single mode fibre optic technology, creating extremely high bandwidth for error free transport of 4K data and beyond, at any cable length and conveying copper for delivering power to feed the camera.<\/p>\r\n Mounts to the camera body using a special mounting plate and screws tapping into two of the 1\/4\" inserts at the right side of the camera body.<\/p>\r\n Connects to Blackmagic Studio Camera using a separate flexible LC Duplex bridging cable, and a separate XLR input for power.<\/p>\r\n All aluminium solution, built around a milled outer block containing both connectors, anodized matte black finish, perfectly matching camera body surface.<\/p>\r\n Adjustable belt clip included, for connecting the adapter straight to belt or pocket.<\/p>\r\n Integrated universal 1\/4' 20 UNC insert for mounting to tripod, rig or arm.<\/p>","features":" FieldCast Power Box One is a 19\" 1RU box with 2x 24V power supplies in the box, of which one is redundant. So if one power supply falls out, the other one takes over.<\/p>\r\n FieldCast Power Box One has 4 XLR connections built-in, so you can power up to 4 cameras or any other SDI or optical fibre equipment in the field through FieldCast Hybrid Main Cables.<\/p>\r\n FieldCast Power Box One is developed to power cameras from a distance so that the camera man is freely to move in the field without having to carry lots of cables and batteries as all camera data plus power is going over one FieldCast Hybrid Main Cable. FieldCast Power Box One is a one rack mount unit typically implemented near FieldCast Power Panel. With XLR patch cables, not by default included in FieldCast Power Box One, one can connect FieldCast Power Box One with FieldCast Power Panel, and power up to 4 cameras or any other SDI or fibre optic equipment over fibre.<\/p>","features":" FieldCast Power Panel One is a 19\" 1RU panel box, on the frontside equipped with four FieldCast 2Core SM Hybrid Chassis Connectors to connect to up to four FieldCast Hybrid Main Cables.<\/p>\r\n The back is equipped with four LC Duplex connectors to patch to up to four LC SFPs in the ATEM Studio Converter. In addition FieldCast Power Panel One is provided with four XLR connectors, ideal for connecting to FieldCast Power Box for 24V power.<\/p>\r\n FieldCast Power Panel One is developed to properly and sturdily patch FieldCast Hybrid Cables to ATEM Studio Converter, ATEM Talkback Converter 4K or any other device using LC single mode connectivity while getting current from FieldCast Power Box to power cameras or any other LC single mode equipment on long distance. FieldCast Power Panel One is a panel box, 1 rack unit in height, which can be implemented in a 19” rack nearby your Studio Converter and FieldCast Power Box. Four FieldCast 2Core SM Hybrid Chassis Connectors are mounted on the frontside of the FieldCast Power Panel One; so you can connect to up to four FieldCast Hybrid Main Cables coming out of cameras or other equipment . Built-in on the backside of the FieldCast Power Panel One are four LC Duplex and four XLR connections; with standard LC Duplex patch cables you can connect to the SFPs in ATEM Studio\/Talkback 4K Converter; with standard XLR cables you can patch to FieldCast Power Box and feed each FieldCast Hybrid Main Cable with 24V power. Patch cables are not by default included in FieldCast Power Panel One.<\/p>","features":" Adapter One Plus is identical to Adapter One, except for the extra four pin XLR chassis connector; now you can tap into an external battery and get a more robust and safe connection to your power supply.<\/p>\r\n Adapter One Plus connects the FieldCast™ Cable straight to Blackmagic Design’s famous ATEM Camera Converter™, and completely and effectively protects the vulnerable fibre optic LC connections to the SFP of Camera Converter™.<\/p>\r\n Adapter One Plus brings all advantages of Adapter One, and adds a four pin XLR chassis connector for tapping in your power supply or battery. Now you can go into the field with an extra battery pack to feed your Camera Converter or recharge its battery with power supplies that use standard XLR connectors! If you want to be sure that your Camera Converter has a tight, standard, low cost, available connection to external battery or power supply, go for Adapter One Plus. And if you want to keep your costs down maximally, substitute the laptop connector on your Camera Converter power supply for a female four pin XLR connector, and you can continue to use it.<\/p>\r\n The adapter features a FieldCast 2Core Chassis Connector, so you can connect the FieldCast 2Core SM (single mode) Main Cable to Blackmagic Design ATEM Camera Converter, fast and easy.<\/p>\r\n Also features a Neutrik four pin XLR chassis connector, so you can connect an external battery pack to Camera Converter by simply using a standard adapter cable with XLR four pin female cable connector.<\/p>\r\n Taps into the power connector of Camera Converter using a 90 degree power plug. This does not change the functionality of the unit.<\/p>\r\n Robust all aluminium solution, built around a milled out block completely covering and protecting the vulnerable LC connections to the SFP of Camera Converter.<\/p>\r\n Mounts to the back of Camera Converter using the four taps of its housing; no customizing, no drilling, no glueing whatsoever.<\/p>","features":" This SMPTE fibre cable is a hybrid cable used in professional broadcast environments. Available in 100m, 150m, and 200m with or without drum. For shorter lengths, a 30m SMPTE 311M\/304 fibre cable is also available.<\/p>\r\n This SMPTE fibre cable is a hybrid cable used in professional broadcast environments. Available in 100m, 150m, and 200m with or without drum. For shorter lengths, a 30m SMPTE 311M\/304 fibre cable is also available.<\/p>\r\n This SMPTE fibre cable is a hybrid cable used in professional broadcast environments. Available in 100m, 150m, and 200m with or without drum. For shorter lengths, a 30m SMPTE 311M\/304 fibre cable is also available.<\/p>\r\n This SMPTE fibre cable is a hybrid cable used in professional broadcast environments. Available in 100m, 150m, and 200m with or without drum. For shorter lengths, a 30m SMPTE 311M\/304 fibre cable is also available.<\/p>\r\n This SMPTE fibre cable is a hybrid cable used in professional broadcast environments. Available in 100m, 150m, and 200m with or without drum. For shorter lengths, a 30m SMPTE 311M\/304 fibre cable is also available.<\/p>\r\n This SMPTE fibre cable is a hybrid cable used in professional broadcast environments. Available in 100m, 150m, and 200m with or without drum. For shorter lengths, a 30m SMPTE 311M\/304 fibre cable is also available.<\/p>\r\n This SMPTE fibre cable is a hybrid cable used in professional broadcast environments. Available in 100m, 150m, and 200m with or without drum. For shorter lengths, a 30m SMPTE 311M\/304 fibre cable is also available.<\/p>\r\n Adapter Three bridges FieldCast fiber optic infrastructure and opticalCON Duo fiber optic cable assemblies, enabling you to migrate to FieldCast without having to sacrifice your old opticalCON cable drums. With Adapter Three you can connect any opticalCON Duo cable to FieldCast 2Core Chassis Connector or Adapter Cable. You even can connect to Coupler Cable and cascade FieldCast and opticalCON for longer distances.<\/p>\r\n Adapter Three really makes it easy to integrate opticalCON Duo cable assemblies into your growing FieldCast infrastructure. Of course you can decide to go FieldCast all the way and refit your cables, but in the mean time you simply want to have return on your investment and use your opticalCON Duo to the max. And if you are in the rental business, you want to be as flexible as you possibly can! Adapter Three features on one side of the meter long cable a standard FieldCast 2Core Cable connector, and on the other side, inside of the aluminum enclosure, a generic LC Duplex connector that taps into the back of a factory standard Neutrik opticalCon Duo chassis connector. We have a Single Mode and a Multimode version of the adapter, and for your convenience we put a 1\/4\" steel insert into its base, so you can connect it straight to tripod, stand, rig or other gear.<\/p>","features":" The Mux\/Demux range are a multiplexer-demultiplexer pairs, capable of transporting multiple channels of 3G-SDI over just one fiber optic cable up to a maximum distance of 40 kilometres.<\/p>\r\n Each multiplexer has multiple SDI inputs with reclocked loop through for each channel, the demultiplexer has two SDI outputs for each channel and both units are connected by a standard LC fiber connection.<\/p>\r\n Each multiplexer-demultiplexer pairs are also available with ST or SC Fiber connections (upon request).<\/p>\r\n The Mux\/Demux range are a multiplexer-demultiplexer pairs, capable of transporting multiple channels of 3G-SDI over just one fiber optic cable up to a maximum distance of 40 kilometres.<\/p>\r\n Each multiplexer has multiple SDI inputs with reclocked loop through for each channel, the demultiplexer has two SDI outputs for each channel and both units are connected by a standard LC fiber connection.<\/p>\r\n Each multiplexer-demultiplexer pairs are also available with ST or SC Fiber connections (upon request).<\/p>\r\n The Mux\/Demux range are a multiplexer-demultiplexer pairs, capable of transporting multiple channels of 3G-SDI over just one fiber optic cable up to a maximum distance of 40 kilometres.<\/p>\r\n Each multiplexer has multiple SDI inputs with reclocked loop through for each channel, the demultiplexer has two SDI outputs for each channel and both units are connected by a standard LC fiber connection.<\/p>\r\n Each multiplexer-demultiplexer pairs are also available with ST or SC Fiber connections (upon request).<\/p>\r\n FieldCast PTZ Monk is a small one channel fiber optic converter designed for 3G SDI PTZ camera systems with ethernet control.<\/p>\r\n PTZ Monk converts the 3G SDI video output of the PTZ camera to fiber and acts as a fiber media converter for the ethernet control data. PTZ Monk has separate standard connectors for power, SDI and ethernet and patches easily to PTZ camera.<\/p>","features":" FieldCast Fiber Dock One is a four channel fiber optic converter designed for 3G SDI PTZ camera systems with ethernet control. If you want to go fiber with these the easy way, go Fiber Dock One.<\/p>\r\n As a four channel solution it brings you four channels of 3G SDI output, so you can connect straight to your switcher or monitor, but instead of coaxial cable it uses fast and reliable fiber optic connectivity to transport the video signals generated by your PTZ cameras. For every channel, Fiber Dock One connects to FieldCast hybrid cable, and this light and robust cable contains two strands of fiber for data transport and two copper conductors for power transmission. Just imagine, each camera only needs one flexible cable to transmit uncompressed SDI video, control data and power. Supplied with power cable.<\/small><\/p>","features":" FieldCast Fiber Node One is a four channel fiber optic converter designed as a local unit for FieldCast Fiber Base One.<\/p>\r\n Fiber Node One has exactly the same functionality as FieldCast Fiber Dock One, and it has all the inputs and outputs. So what's the difference? Fiber Node One comes with a SMPTE connector for standard SMPTE 311M\/304 fiber optic cable, and this extra connector adds a lot of functionality to the converter. SMPTE cable is a hybrid cable similar to FieldCast hybrid cable. It also has two strands of fiber and two copper conductors for power transmission, but it uses way larger connectors allowing for AC power to be transmitted over it. Fiber Node One uses this feature to the max. If at the other end of the cable you connect a 100-240VAC power source, Fiber Node One will draw power from the cable and still can do everything a Fiber Dock One does, but without the need for local power. This means that you can place the unit at any strategic position in the field, and the SMPTE cable simply acts as a long extension cord. But Fiber Node one also uses the two fibers of the SMPTE cable! One fiber is used for extending the fiber optic ethernet network, and the other fiber carries all four video signals coming from the FieldCast PTZ Monk units.<\/p>\r\n Here is where Fiber Base One comes in. It connects to the remote end of the SMPTE cable, powers it, taps into the fiber optic ethernet network, and receives the four video signals. It has ethernet i\/O and four 3G SDI output channels, just like Fiber Dock and Fiber Node, but it only has the SMPTE connector for fiber and power. Bottom line, Fiber Base One is designed to act as a remote unit for Fiber Node One and Fiber Node One acts as a local unit for Fiber Base One.<\/p>","features":" FieldCast Fiber Base One is a four channel fiber optic converter, designed as a remote unit for FieldCast Fiber Node One.<\/p>\r\n It sports one SMPTE connector and needs one SMPTE 311M\/304 fiber optic cable to connect to Fiber Node One, to power it and to communicate with it. At its input, Fiber Base One accepts any voltage level between 100 and 240VAC, and the output level of the SMPTE connector is equal to the input level. So, when you plug into a 220V power outlet, the SMPTE connector simply offers 220V. Fiber Base One brings you four channels of 3G SDI output and ethernet I\/O, just like Fiber Dock One and Fiber Node One, and you can connect straight to the switcher, plug in one or more PTZ controllers, add a multiviewer, recorders, whatever you want. Communication with Fiber Node One is pretty straightforward. One fiber of the SMPTE cable is used to tap into the fiber optic ethernet switch of Fiber Node. This means that a PTZ controller connected to Fiber Base is part of the same network as a PTZ controller connected to Fiber Node, and both can control any PTZ camera in the network. The other fiber of the SMPTE cable forwards all four video signals that reached Fiber Node One to Fiber Base One, which means that the four SDI outputs of both Fiber Node One and Fiber Base One output exactly the same signals.<\/p>\r\n In other words, when connected, Fiber Base One, the remote system, and Fiber Node One, the local system, are functionally equivalent and can work together. Typically, Fiber Base One will be placed in a control room or OB Van and connects to the switcher, where Fiber Node One will be mounted in a flightcase and connects to a portable multiviewer.<\/p>","wib":""},{"productName":"Fiber Dock System One","prodCode":"FCT-PTZMFDOCKSYSTEM1","shortDes":"Turnkey fiber optic system for four 3G SDI PTZ camera systems with ethernet control","manufacturer":"FieldCast","longDes":"","features":"\r\n
Connect Adapter Two Hybrid to your Studio Camera, and you have the most robust fibre optic connection possible, even more robust than the good old BNC connectors on your copper cable.
Also, even with 4K video, you can go any distance you want and use the same Studio Cameras in the field without worries.<\/p>\r\n\r\n
The power supply to power remotely<\/h4>\r\n
Mount it, plug it in and be ready to go with power over fibre<\/h4>\r\n
\r\n
The hybrid hub for Studio Converter<\/h4>\r\n
Mount it, plug it in and be ready to go fibre the sturdy way<\/h4>\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
Connect your battery to Camera Converter<\/h4>\r\n
Robust fibre optic connectivity made easy<\/h4>\r\n
\r\n
Ideal use between the Blackmagic Design Camera Fiber Converter<\/a> to their Studio Fiber Converter<\/a>.<\/p>\r\n\r\n
Ideal use between the Blackmagic Design Camera Fiber Converter<\/a> to their Studio Fiber Converter<\/a>.<\/p>\r\n\r\n
Ideal use between the Blackmagic Design Camera Fiber Converter<\/a> to their Studio Fiber Converter<\/a>.<\/p>\r\n\r\n
Ideal use between the Blackmagic Design Camera Fiber Converter<\/a> to their Studio Fiber Converter<\/a>.<\/p>\r\n\r\n
Ideal use between the Blackmagic Design Camera Fiber Converter<\/a> to their Studio Fiber Converter<\/a>.<\/p>\r\n\r\n
Ideal use between the Blackmagic Design Camera Fiber Converter<\/a> to their Studio Fiber Converter<\/a>.<\/p>\r\n\r\n
Ideal use between the Blackmagic Design Camera Fiber Converter<\/a> to their Studio Fiber Converter<\/a>.<\/p>\r\n\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
Kit Includes<\/h4>\r\n
\r\n
\r\n
\r\n
Kit Includes<\/h4>\r\n
\r\n
\r\n
\r\n
Kit Includes<\/h4>\r\n
\r\n
\r\n
\r\n
Specifications<\/h4>\r\n
\r\n
The opticalCON DUO link to FieldCast<\/h4>\r\n
Integrate your opticalCON DUO cable into FieldCast networks<\/h4>\r\n
\r\n
Specifications<\/h4>\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n
3 Versions Available<\/h4>\r\n
\r\n
3 Versions Available<\/h4>\r\n
\r\n
3 Versions Available<\/h4>\r\n
\r\n
When you connect a FieldCast hybrid cable coming from FieldCast Fiber Dock or FieldCast Fiber Node to the hybrid connector of PTZ Monk, it receives 24VDC at the input, and converts it to a stable 12VDC at the XLR 4-pin output to feed the camera.
At the same time the built in media converter taps into the fiber optic ethernet switch of Fiber Dock or Fiber Node and the ethernet I\/O port on PTZ Monk becomes part of the network. And lastly, the 3G SDI input on PTZ Monk is converted to fiber, and the signal will find its way to Fiber Dock or Fiber Node.<\/p>\r\n\r\n
You can connect your PTZ controller directly to the ethernet I\/O port of Fiber Dock One, and it will act as a standard ethernet switch between your controller and your cameras, but again, instead of copper cable it uses fast and reliable fiber optic connectivity to communicate with them. Furthermore, Fiber Dock One features a four channel 24VDC power supply to power all four cameras over the cable.<\/p>\r\n
At the other end of each hybrid cable you only need to attach FieldCast PTZ Monk, a one channel fiber optic converter with 3G SDI input, ethernet I\/O and 12VDC output. Once your PTZ camera is connected to FieldCast PTZ Monk, it can start up, it will listen to the PTZ controller you connected to FieldCast Fiber Dock One, and a video signal will neatly show up at one of the Dock's four SDI monitor outputs.<\/p>\r\n\r\n
\r\n
\r\n
\r\n
Fiber Dock One<\/h4>\r\n
\r\n
PTZ Monk<\/h4>\r\n
\r\n
\r\n
\r\n
Fiber Base One<\/h4>\r\n
\r\n
Fiber Node One<\/h4>\r\n
\r\n
PTZ Monk<\/h4>\r\n
\r\n
\r\n
\r\n