FieldCast launches Power Panel One
Just before the opening of IBC2017 we proudly announce the immediate availability of our FieldCast Power Panel One and FieldCast Power Box One. If you want to combine fiber optic connection and power over the cable, these two products will bring exactly what you need!
Power Panel One sports four FieldCast Hybrid Chassis Connectors that can be easily powered by using the four independent XLR 4-pin connectors at the back. Connect your own power source(s), or go for our specially built Power Box One. The back panel also has four LC Duplex Chassis Connectors for integrating the Hybrid Connectors into your LC based infrastructure.
Power Panel One integrates fiber optic signal and DC power, and gives you four independent connections, all four with power led control, to connect your FieldCast Hybrid cable to.
Power Box One now has become even better than we envisaged when we started developing it.
It contains two redundant power supplies, and has four 24V DC power outputs that are completely separated from each other and by consequence each have full auto-recovery protection! We optimized dynamic voltage response and use minimal external capacitors, so at the other end of the cable you can switch on your camera without worrying about the system shutting down.
Power Box One can deliver up to 400W of highly stabilized 24V DC power, divided over four independent channels. Use the four 4-pin XLR connectors at the back and connect to our Power Panel One, and you will have the perfect combination for powering four FieldCast Hybrid cables!
At the other end of the cable you can use the built-in DC-DC circuitry of our Converter Three Hybrid to go down to stable 12V DC and feed your SDI camera! Converter Three is our revolutionary12G bi-directional fiber to SDI converter with integrated FieldCast Chassis Connector.