Wooden Camera Unified VCT Wedge Plate

Sony VCT-14 standard device that interfaces with the bottom of all Unified Baseplates

Suggested List Price: £405+VAT

Product Code: WC-223300

Where to buy

Stock status: In Stock; available from resellers

Qty:

Other Plates

Movcam 12 inch Sliding Dovetail Plate

Movcam 12 inch Sliding Dovetail Plate

Sliding Dovetail Plate - 12"
Movcam 19mm Sliding Bridge Plate

Movcam 19mm Sliding Bridge Plate

Sliding Bridge Plate - 19mm
Movcam 19mm Sliding Bridge Plate - 2

Movcam 19mm Sliding Bridge Plate - 2

Sliding Bridge Plate - 19mm
Movcam 19mm Sliding Bridge Plate - 3

Movcam 19mm Sliding Bridge Plate - 3

Sliding Bridge Plate - 19mm
Movcam 24 inch Sliding Dovetail Plate

Movcam 24 inch Sliding Dovetail Plate

Sliding Dovetail Plate - 24"

Wooden Camera Unified Systems Overview

In this video Wooden Camera discuss their new Unified Systems, including Unified Baseplates, Unified Baseplates, and Unified VCT

  • Sony VCT-14 standard device that interfaces with the bottom of all Unified Baseplates
  • Allows each Unified camera rig to be quickly installed and balanced properly over your shoulder
  • Safety pin and stopper screws on the ends prevent accidental removal
  • Threaded M6 ARRI standard rosettes are found on each side and can be combined with our Rosette Standoffs and Rosette Arms for a quick, handheld configuration
  • Also present are 1/4-20 threaded holes and the ARRI standard accessory mounts (3/8-16 threaded hole with locating pins adjacent)
  • At the rear of the wedge plate, a knob is present which can be tightened after installing onto the VCT-14 Tripod Plate to prevent any potential wiggle
  • At the rear of the wedge plate, a knob is present which can be tightened after installing onto the VCT-14 Tripod Plate to prevent any potential wiggle

Specifications:

  • Weight: 610g / 1.3 lbs
  • Dimensions: 50.8 x 101.6 x 254 mm / 2 x 4 x 10"

Download the latest Firmware and Software

  • 2 x 1/4-20 Low Profile Screws
  • 2 x 3/8-16 Low Profile Screws