The RED DSMC2 Accessory Kit (Base) includes the Easy Riser, a baseplate that has 1/4-20 and 3/8-16 mounting points on the bottom, provides 1/4-20 holes on the side for attaching accessories and also brings the camera up to correct lens height when using a Bridgeplate built to RED standards. The LW 15mm Bracket attaches to the Easy Riser to hold two 15mm Rods (6") at the correct lens height. On top of the camera, the Pass Through Top Plate (RED DSMC2) provides 26pin LCD Connection and 3pin trigger handle interface. The Trigger Handle (RED DSMC2) is a tool-less handle that can trigger the camera through the 3pin pogo interface on top of the camera or Pass Through Top Plate (RED DSMC2).
RED Digital Cinema’s DSMC2 architecture has been one of the company’s most enduring camera systems. The design offers superb modularity, with the entire camera system built around a ‘Brain’, RED’s terminology for the camera module, housing the sensor, ASIC (Application Specific Integrated Circuit) for image processing, Mini-Mag slots for media, and I/O connectors for accessories. This approach offers a real advantage when building your shooting kit, as the same Brain can be configured for lightweight handheld or tracking applications, or fully rigged as a studio camera.