Wooden Camera Master Top Handle (Universal Center Screw Channel)

Universal Center Screw Cannel Master Top Handle

Suggested List Price: £820+VAT

Product Code: WC-253100

Where to buy

Qty:

Other Handles

Movcam Anti-Skid Control Handgrip

Movcam Anti-Skid Control Handgrip

Anti-Skid LANC Control Handgrip for Rigs
Movcam Anti-Skid Handgrip

Movcam Anti-Skid Handgrip

Anti-Skid Handgrip for Rigs
Movcam Anti-Skid Handgrip Kit

Movcam Anti-Skid Handgrip Kit

Anti-Skid Handgrip Kit
Wooden Camera Canon C100 | C300 | C500 Handgrip Relocator (ARRI Rosette)

Wooden Camera Canon C100 | C300 | C500 Handgrip Relocator (ARRI Rosette)

Handgrip Relocator for Canon C100 | 300 | 500 - ARRI Rosette
Wooden Camera Cheese Handle and Extension

Wooden Camera Cheese Handle and Extension

Adjustable length handle for RED Epic and Scarlet
Movcam Control Handle for A7 II | A7R II | A7S II

Movcam Control Handle for A7 II | A7R II | A7S II

Sony A7 II/A7R II/A7S II Control Handle
  • Modular handle system designed for larger camera builds and back of camera operation
  • Features two center screws channels that can accomodate spacings up to 92mm (3.6 inches) apart and can be installed on a wide variety of cameras
  • Attaches to the top of the camera by 1/4-20 or 3/8-16 screws
  • Included in the kit is the main handle section which has a hot shoe mount in front as well as a 15mm rod opening with thumbscrew
  • The rear portion of the handle also features a 15mm opening and is clamped down using an M4 screw

Specifications:

  • Weight: 824 g / 1.85 lbs
  • Dimensions: 100.16 x 196.85 x 476.25mm / 4 x 7.75 x 18.75"

Master Top Handle (Universal Center Screw Channel) is a modular handle system designed for larger camera builds and back of camera operation. The handle features two center screws channels that can accomodate spacings up to 92mm (3.6 inches) apart and can be installed on a wide variety of cameras. The Master Top Handle attaches to the top of the camera by 1/4-20 or 3/8-16 screws making it extremely secure and ARRI locating pins can be installed to match the MAP-2 on Alexa Mini and Top Plate (VariCam LT).

Included in the kit is the main handle section which has a hot shoe mount in front as well as a 15mm rod opening with thumbscrew. Also attached to the front is a 15mm LW rod bracket for adding pass through top rods or our AIR EVF Systems. The rear portion of the handle also features a 15mm opening and is clamped down using an M4 screw. 1/4-20 and 3/8-16 mounting points are available on three sides, as well as the ARRI standard accessory mount.

Three extensions, in different lengths and a bend piece, are included to build the handle out further over the lens area, toward the rear, over the module and battery area, and down the back side behind the battery.

Extensions are added easily and securely by inserting at the correct angle aligning the tab and slot, rotating clockwise, and then pushing in again. This multi-action attachment method prevents the extensions from accidentally being removed. Once pushed into place, simply tighten the screw to keep it locked in position.

Download the latest Firmware and Software