Encoders

Bond 759 G

Teradek

Bond 759 G

Bond HEVC/AVC Backpack + MPEG-TS - Gold Mount with EU Nodes

Product Code: TER-BOND759G

Suggested Retail Price £6,995+VAT

Where to buy

Stock status: In Stock; available from resellers

Kit List

View your Kit List
  • Bond HEVC/AVC Backpack + MPEG-TS
  • All in one complete Bonding Solution
  • Real-Time HEVC/AVC (H.265/H.264) Encoder (Also available in just H.264 only. See Bond 659)
  • Network Bonding with LTE Modems and
  • High Gain Antennas
  • Gold or V Mount Battery Options (battery not included)
  • Integrated Locking Cables
  • Active Cooling keeps gear running optimally

Next Level Mobile Broadcasting

The Bond Backpack is an all in one professional HEVC/H.264 streaming solution for broadcasters seeking the best in signal reception and video quality.

High Gain Antennas

Wireless reception for Teradek Node modems is greatly enhanced with two high gain antennas attached to the interior of the backpack.

Gold or V Mount Battery Plate

Choose between Gold-mount, V-mount, or no battery plate for portable power. When your battery runs dry, Cubes internal Li-Ion battery will give you 5 minutes of operation while you swap power sources.

Node Modems

Each backpack supports up to 5 USB or Teradek Node modems, ensuring you have connectivity wherever you go.

Integrated Locking Cables

To keep things tidy, we’ve neatly integrated several locking connector cables to attach your bonding encoder to each Node modem, ensuring your system is always running even if your backpack is dropped or tossed across the room.

HEVC/AVC Bonding Codec

At the heart of the Bond Backpack is the Cube encoder, a High Profile HEVC encoder that supports bitrates up to 30 Mbps, both HDMI and 3G-SDI inputs, and a boot-to-live time of just 20 seconds. H.264 only encoders are also available.

Active Cooling

To keep you comfortable and your gear operating optimally, we’ve integrated a practically silent fan to keep hot air out and cool air in.

Ergonomic, Weather Resistant Design

The Bond Backpack is ergonomic, lightweight, and weather resistant, allowing the camera operator to focus on the content and not on fatigue or damage from the elements. Nylon strips on the backpack’s shoulder straps keep your cables neatly dressed along your shoulder, while the quick release lock on the front offers quick access to both the encoder and battery.

Teradek Bond 759 GU
Bond 759 GU

Bond HEVC/AVC Backpack + MPEG-TS - Gold Mount

Teradek Bond 759 VU
Bond 759 VU

Bond HEVC/AVC Backpack + MPEG-TS - V-Mount

Teradek Bond 759 V
Bond 759 V

Bond HEVC/AVC Backpack + MPEG-TS - V-Mount with EU Nodes

Teradek Firmware Version 8.2.5

New Features

  • Added 'Auto Format Conversion' option to 7xx decoders
    • Enabled is default behavior, allows conversion between incoming streams and decoder output formats
    • Disabling this option prevents audio/video sync drifting, requires matching stream and output formats
    • More info here: https://support.teradek.com/hc/en-us/articles/360019240394-700-series-decoders-format-conversion-and-audio-video-sync
  • Added RTMPS support
  • Added individual SDI audio channel selection (Custom audio pair selection)

Changes and Improvements

  • Improved audio/video sync robustness - see auto format conversion option above
  • Improved decoder stability
  • Bitrate can be changed without interrupting broadcasts
  • Web UI mobile display improvements -- Removed separate scrolling panels in web UI and other improvements
  • Use FFMPEG to generate HLS segments
  • Moved Sputnik selection into 'Advanced Settings' on cloud services page
7xx encoders and decoders
  • Quickview stream defaults to H.264

Bug Fixes

  • Bond module was sometimes not detected
  • Core-enabled Sputnik listing did not display all servers
  • Network connections could be reset when connecting/disconnecting modems
  • HTTP Live segment size, playlist length settings were ignored
  • Fixed some issues with NFS share compatibility
  • Could not log out from YouTube via front panel
7xx encoders and decoders
  • Decoder audio/video sync would drift after some time, see auto format conversion option
  • Decoder 1080i output only displayed 1 field
  • Decoder audio playback could stop after ~7 hours in some scenarios
  • Twitch audio/video sync drifted with 50/60 fps video
6xx encoders and decoders
  • Sputnik video stream could stop after some time when streaming out to RTMP destinations
  • Bonding protocol changes did not take effect until after a codec restart
  • HLS streaming did not start automatically on boot up, required codec restart

Teradek Firmware Version 8.2.4

New Features

  • None

Changes and Improvements

  • Improved audio/video sync robustness
  • Video stream is no longer interrupted when changing bitrate

Bug Fixes

  • Interlaced video fields were swapped between frames when deinterlacer was disabled
  • HDMI signal from some Atomos recorders was not recognized

Teradek Firmware Version 8.2.3

New Features

7xx encoders and decoders
  • Added camera triggered recording
  • Added close captioning support
  • Added 1080p23.98/24 support on 7xx decoders
  • Added SD resolution support

Changes and Improvements

  • Added recovery image version to web UI
  • Added firmware update check to web UI
7xx encoders and decoders
  • Improved encoder/decoder stability
  • Added restart encoder button to web UI
6xx encoders and decoders
  • Added framerate to codec info page

Bug Fixes

  • Network reset did not default all settings
  • Wrong sputniks were retrieved when changing company in Core
  • Restart video command from Core did not work
  • Node SA did not work with some carriers
  • Some settings were reset after firmware upgrade
  • Fixed some inconsistencies with status reporting
7xx encoders and decoders
  • Video stream could become corrupted after encoding for some time
  • Fixed most cases where audio/video sync drifted over time. Still investigating issues with multiple TCP clients or bonding connections
  • RTSP streams did not work with some clients
  • Fixed various issues with IFB stability
  • Slice encoder front panel would lock up if booted with USB-Ethernet adapter connected
  • Sputnik connection could reset if a single modem was disconnected/reconnected
6xx encoders and decoders
  • Recording to SD card failed if recording was enabled prior to codec initialization
  • 480p input resolution did not work

Teradek Firmware Version 8.2.1

New Features

  • Added manual audio/video sync adjustment

Changes and Improvements

  • Improved handling of Sputnik list requests from Core
  • Enabled loop out video from T-RAX HEVC encoder cards

Bug Fixes

  • Fixed various issues with audio/video sync
  • Video frame rate was initialized incorrectly for some video formats
  • Cube with Bond module failed to boot correctly when certain network adapters/modems were connected
  • MPEG-TS constant bitrate setting was not applied correctly
  • Key Frame Interval setting did not work correctly
  • Audio bitrate setting was ignored
  • H.264 profile setting was ignored
  • 7xx encoder Live:Air status always reported zero clients
  • Disabling quickview stream prevented 7xx encoders from starting

Download the latest Firmware and Software

  • 1 x Backpack with Gold-Mount
  • 1 x Cube 755 HEVC/AVC Encoder
  • 2 x Antenna 2dBi Wifi 2.4/5.8GHz
  • 1 x SDI BNC to BNC Cable
  • 1 x Bond Expansion Module
  • 1 x Quick Start Guide
  • 4 x EU Nodes
  • 8 x Antenna 2G/3G/4G Sma Mount
  • 1 x 2-pin to PTap 6.5in Cable
  • 1 x 4-pin Connector to 4pin Connector 34inch cable

Cookies

We use cookies to help us offer you the best online experience. By continuing to use our website/or clicking Accept, you consent to the use of cookies in accordance with our privacy policy.