Teradek Bolt 500 3G-SDI | HDMI Video Transceiver Set

SDI | HDMI Wireless Video Tranceiver Set - 500ft

Suggested List Price: £2,625+VAT

Product Code: TER-BOLT-935

Where to buy

Stock status: In Stock; available from resellers



Teradek Bolt 500 3G-SDI | HDMI Video 2 x RX Transceiver Set

SDI | HDMI Wireless Video 2 x RX Tranceiver Set - 500ft

Product Code: TER-BOLT-938

Suggested List price: £3,840+VAT

Optional Extras

Teradek Sidekick II

Teradek Sidekick II

Lightweight HD-SDI Receiver

Product Code: TER-BOLT-954

Suggested List Price: £1,920+VAT

Teradek Bolt 500 3G-SDI | HDMI Receiver

Teradek Bolt 500 3G-SDI | HDMI Receiver

SDI | HDMI Wireless Video Receiver - 500ft

Product Code: TER-BOLT-937

Suggested List Price: £1,220+VAT

  • SDI | HDMI Wireless Video Tranceiver Set - 500ft
  • Bolt is a premium wireless video solution for cinematographers, broadcasters, and independent content creators

Bolt 500, with highly refined software, new wireless radios and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:

  • Longer Range
    Transmit visually lossless video up to 500ft with no delay.
  • Individual Identity
  • Easily identify which Bolt TX and RX work together with removable colored top plates.
  • Built-In HDMI to SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range.
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created.
  • Support for Spectrum Analyzer
    You can now view which channels are not ideal for Bolt whenever you arrive on set. No more guessing, no more mystery interference.
  • Supports Wired Pairing

Technology Guides

Teradek Bolt Firmware v2.1.0

New Features

Bolt 500/1000/3000

  • Added support for Spectrum Analyzer
  • Added support for wired pairing
  • Added support for China region

Bolt 3000 Only

  • Added Broadcast mode, allows for longer range when used with directional antennas
  • Added three 'Quality' options to balance operation between maximum range and maximum overall quality

Changes and Improvements

  • Improve SDI audio compatibility

Bug Fixes

  • 2nd generation Bolt receivers would enter 'Wireless Off' state after some time without an active link

Teradek Bolt Firmware v2.0.5

New Features

  • None

Changes and Improvements

  • Update to support minor hardware change, does not affect existing devices

Bug Fixes

  • None

Bolt Firmware v2.0.6

New Features

  • Added 3G-SDI Level B DL (1080p50/59/60 over 3G-SDI) support for 3rd Generation Bolt line. 3G-SDI Level A will be present on the loop out.
  • Added support for Canon HDMI record flag and time code output over HDMI and SDI.

Changes and Improvements

  • Improved SDI audio support with Black Magic ATEM products for 3rd generation Bolt products.
  • Support for minor hardware change on 3rd generation Bolt. Does not affect existing devices. To update 500/1000/3000, click Advanced, then check the box in the Upgrade column for the Controller

Bug Fixes

  • Status LED did not work correctly for Bolt 1000/3000

Download the latest Firmware and Software

  • 1 x Bolt 500 (936) Transmitter
  • 1 x 2-pin Lemo to PowerTap 18 inch Cable
  • 1 x Hot Shoe Adapter (1/4"-20 inch)
  • 1 x HDMI 18in Cable (Type A to Type A)
  • 1 x Bolt 500 (937) Receiver
  • 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x HDMI 18in Cable (Type A to Type A)
  • 1 x USB 3.0 Cable A to Micro B (3ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable