Teradek Bolt 500 3G-SDI | HDMI Receiver

SDI | HDMI Wireless Video Receiver - 500ft

Suggested List Price: £1,220+VAT

Product Code: TER-BOLT-937

Where to buy

Stock status: Stock due on 22/09/2017

Qty:

Other Receivers

Paralinx Ace RX HDMI

Paralinx Ace RX HDMI

Wireless Receiver for Ace - HDMI
Paralinx Ace RX SDI

Paralinx Ace RX SDI

Wireless Receiver for Ace - SDI
Teradek BIT-026

Teradek BIT-026

Antenna Array for Beam, Bolt 500, 600, 1000, 2000 and 3000 receivers
Teradek BIT-028

Teradek BIT-028

Antenna Array with protective case for Beam, Bolt 500, 600, 1000, 2000 and 3000 receivers
Teradek Bolt 1000 3G-SDI | HDMI Receiver

Teradek Bolt 1000 3G-SDI | HDMI Receiver

SDI | HDMI Wireless Video Receiver - 1000ft
Teradek Bolt 1000 3G-SDI Receiver

Teradek Bolt 1000 3G-SDI Receiver

SDI Wireless Video Receiver - 1000ft
  • SDI | HDMI Wireless Video Receiver - 500ft
  • Bolt is a premium wireless video solution for cinematographers, broadcasters, and independent content creators

Bolt 500, with highly refined software, new wireless radios and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:

  • Longer Range
    Transmit visually lossless video up to 500ft with no delay.
  • Individual Identity
  • Easily identify which Bolt TX and RX work together with removable colored top plates.
  • Built-In HDMI to SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range.
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created.

Technology Guides

Download the latest Firmware and Software

  • 1 x Bolt 500 (937) Receiver
  • 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
  • 1 x Lightstand Adapter (1/4"-20 inch)
  • 1 x HDMI 18in Cable (Type A to Type A)
  • 1 x USB 3.0 Cable A to Micro B (3ft Length)
  • 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable