Teradek Bolt 4K 1500 Gold Mount Deluxe Kit | Bolt 4K 1500 12G-SDI/HDMI Deluxe Kit - Gold Mount

Real-Time 4K Wireless Video

Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 1500 ft. of range.

True HDR Colour

Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.

Rock-Solid Reliability

Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.

Universal Compatibility

Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.

Inputs/Outputs

Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.
Receiver: 2x 12G-SDI, 1x HDMI 2.0

Battery Plates

Optional Gold or V-mount battery plate with pass-through power available on both TX & RX.

Camera Metadata

Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.

Bolt App for iOS

Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.

Teradek Bolt 4K Firmware Version 4.2.1

New Features

• Added Support for Bolt 4K LT

Changes and Improvements

• Reduced time-to-video after power on and video disconnect/reconnect
• Improved pairing reliability and speed, wireless and wired/Bluetooth
• Improved status message updates
• Removed radio reset after changing fixed frequency from front panel
• Improved 20MHz mode stability
• Added F next to frequency when in fixed frequency mode

Bug Fixes

• Fixed issue where some TX units could transmit a blank green screen when powered on
• Fixed unnecessary restarts, resets, reduce frequency of 'Please Wait' and 'Applying Settings' messages
• Artifacts were visible when transmitting 1080i50 video
• Video could stop transmitting after some time using 1080i59 resolution
• Disabling fixed Frequency mode set Frequency to 5375MHz
• Front panel could show transmitting video when no video is connected
• Video quality mode could be set to auto when changing other wireless settings

Download the latest Firmware and Software

• Teradek Bolt 4K and 4K Max
• Teradek Bolt 4K and 4K Max v2
• Download HiRes Images

• 1x Bolt 1500 12G-SDI/HDMI Wireless TX Gold Mount
• 1x Bolt 1500 12G-SDI/HDMI Wireless RX Gold Mount
• 1x Antenna Array
• 4x Bolt 4K Wire Cover Plate (Machined Anodized)
• 1x Bolt 4K TX Mounting Bracket
• 1x Lightstand Adapter 3/8in
• 1x Hot Shoe Adaptor
• 4x Screw FlatHead Phillips Black Oxide 18-8 S S 0-80 x 1/8in
• 2x Screw Socket Cap A S, M3 x 16mm
• 1x Hex L key 2.5mm size 3-5/8" length
• 2x HDMI Male Type A (Full) - HDMI Male Type A (Full) 18in Cable
• 2x (Bit 118) 2pin Conn. to PowerTap - 18in Cable
• 1x (Bit 718) 2pin Conn. to 2pin Conn. (Alexa) 18in Cable
• 1x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable
• 5x RP-SMA Male to RP-SMA Male 4in Cable
• 2x SDI 12G BNC to BNC Cable Length: 18in / 46cm
• 1x Teradek Case XL - Bolt 4K TX/4RX and Antenna Array
• 1x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable
• 9x Antenna 2dBi WIFI 2.4/5.8GHz (Small Antenna)
• 1x Teradek Standard Terms and Conditions
• 1x Insert - Product Register
• 1x Quickstart Guide - Bolt 4K 750/1500
• 1x Insert - Bolt 4K A/C Adapter Requirements
• 1x Wooden Camera - Ultra Arm Monitor Mount (1/4-20 to 3/8-16, 5in)