Wireless Video Senders

Bolt 3000 Deluxe Kit SDI | HDMI Gold Mount Wireless Video Transceiver Set

Teradek

Bolt 3000 Deluxe Kit SDI | HDMI Gold Mount Wireless Video Transceiver Set

Deluxe SDI | HDMI Wireless Video Tranceiver Set - Gold Mount 3000ft

Product Code: TER-BOLT-995-1G

Suggested Retail Price £9,200+VAT

Where to buy

Kit List

View your Kit List
  • Deluxe SDI | HDMI Wireless Video Tranceiver Set - Gold Mount 3000ft
  • Longer Range
    Transmit visually lossless video up to 3000ft with no delay
  • 20mhz Channels
    Use more than twice as many Bolts in one location or avoid interference like never before
  • 2 New DFS Channels
    Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range
  • Built-in HDMI To SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
  • Individual Identity
    Easily identify which Bolt TX and RX work together with removable colored top plates
  • Support for Spectrum Analyzer
    You can now view which channels are not ideal for Bolt whenever you arrive on set. No more guessing, no more mystery interference.
  • Added Broadcast mode
    allows for longer range when used with directional antennas
  • Added three 'Quality' options to balance operation between maximum range and maximum overall quality
  • Supports Wired Pairing
  • Metadata and timecode support
  • 3D LUTs
  • Dual inputs/outputs
  • Multicast capable
  • Manual frequency selection
  • USB 3.0 GRAB Engine included

Technology Guides

Teradek Sidekick II
Sidekick II

Lightweight HD-SDI Receiver
[TER-BOLT-954]

Teradek BIT-780-1
BIT-780-1

Yellow Identification Plate for Bolt 1000/3000 Receiver
[TER-BIT780-1]

Teradek BIT-781-1
BIT-781-1

Red Identification Plate for Bolt 1000/3000 Receiver
[TER-BIT781-1]

Teradek BIT-782-1
BIT-782-1

Green Identification Plate for Bolt 1000/3000 Receiver
[TER-BIT782-1]

Teradek BIT-783-1
BIT-783-1

Blue Identification Plate for Bolt 1000/3000 Receiver
[TER-BIT783-1]

Teradek BIT-780
BIT-780

Yellow Identification Plate for Bolt 1000/3000 Transmitter
[TER-BIT780]

Teradek BIT-781
BIT-781

Red Identification Plate for Bolt 1000/3000 Transmitter
[TER-BIT781]

Teradek BIT-782
BIT-782

Green Identification Plate for Bolt 1000/3000 Transmitter
[TER-BIT782]

Teradek BIT-783
BIT-783

Blue Identification Plate for Bolt 1000/3000 Transmitter
[TER-BIT783]

Frequency Violations!

Anyone with a wireless mic knows about frequencies – not just finding a clear channel, but also getting the right licence to operate. In the world of video senders, the same two issues apply. Teradek helps you avoid crowded bands with Bolt XT’s spectrum analyser, but even more important is adhering to legislation governing frequencies. All Teradek wireless equipment, including the BOLT range, is FCC and CE certified. In addition to this, the BOLT range features advanced Dynamic Frequency Selection to ensure there is no interference with civilian navigation, maritime, weather, and military radar systems.

Teradek Bolt Firmware v3.1.6

New Features

  • Added support for Sony Venice Bolt models
  • Enabled ARRI metadata output on Bolt 10k RX

Changes and Improvements

  • None

Bug Fixes

  • None

Teradek Bolt Firmware v3.1.5

New Features

  • None

Changes and Improvements

  • Improved pairing status robustness
  • Updating channels message on front panel shortened to UPD to not block other info

Bug Fixes

  • HDMI signal from some Atomos devices was not detected properly
  • Devices could fail to connect after changing frequency configuration

Bolt Firmware v3.1.3

New Features

  • Initial production release for DSMC2 Bolt

Changes and Improvements

  • None

Bug Fixes

  • Fix Bolt 500 LT firmware upgrade reliability

Download the latest Firmware and Software

  • 1 x Bolt Pro 3000 TX SDI/HDMI
  • 1 x Bolt Pro 3000 RX SDI/HDMI
  • 1 x Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
  • 1 x Bolt RX Single AB Mount Battery Plate 14.4V
  • 1 x SKB Waterproof Utility Case (22 x 17 x 8 inches)
  • 5 x N-Male to RP-SMA 12 inch cables (for use with Bolt Rx Only)
  • 1 x 1/4 20" Thumb Screw (1.25 inch)
  • 1 x 1/4 20" Thumb Screw Plastic Head 2 inch length
  • 1 x 1/4 20 Thumb Screw Plastic Head 3/8 inch length
  • 1 x 1/4-20 Screw Phil Pan Mach Black 3/8 inch
  • 1 x 1/2 20" Lightstand Adapter
  • 1 x 3/8" Lightstand Adapter
  • 1 x 2pin Lemo to PowerTap - 18 inch Cable
  • 1 x 2pin Lemo to PowerTap - 11 inch Cable
  • 1 x PSU 2-Pin Lemo 18W
  • 1 x USB 3.0 SuperSpeed Cable (A to Micro, 3ft)
  • 1 x Hot Shoe Adapter
  • 2-3 x (2 for 1 Rx, 3 for 2 Rx) SDI Cables (BNC to BNC)
  • 2-3 x (2 for 1 Rx, 3 for 2 Rx) HDMI Cables (Type A to Type A)
  • 5 x Antenna 2dBi WiFi 5.8GHz
  • 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
  • 1-Year Warranty on Bolt Pro 2000 Units

Also Consider

SmallHD 702 Bright
SmallHD 702 Bright

7-inch Daylight Viewable 1080P Field Monitor
[SHD-MON702B]

SLR Magic Anamorphot CINE 133PLSET
SLR Magic Anamorphot CINE 133PLSET

Anamorphic CINE 1.33x 3 Lens Set - PL
[SLR-AC133PLSET]

Cookies

We use cookies to help us offer you the best online experience. By continuing to use our website/or clicking Accept, you consent to the use of cookies in accordance with our privacy policy.