Teradek Bolt 3000 3G-SDI | HDMI Receiver

SDI | HDMI Wireless Video Receiver - 3000ft

Suggested List Price: £4,025+VAT

Product Code: TER-BOLT-997

Where to buy

Stock status: In Stock; available from resellers

Qty:

Also consider

Teradek Bolt 3000 3G-SDI | HDMI Transmitter

Teradek Bolt 3000 3G-SDI | HDMI Transmitter

SDI | HDMI Wireless Video Transmitter - 3000ft
SmallHD 1703 HDR

SmallHD 1703 HDR

17" HDR Ready 1000NIT 1080p Ultra Durable Monitor
SmallHD 702 Bright

SmallHD 702 Bright

7-inch Daylight Viewable 1080P Field Monitor

Other Receivers

Paralinx Ace RX HDMI

Paralinx Ace RX HDMI

Wireless Receiver for Ace - HDMI
Paralinx Ace RX SDI

Paralinx Ace RX SDI

Wireless Receiver for Ace - SDI
Teradek BIT-026

Teradek BIT-026

Antenna Array for Beam, Bolt 600, 1000, 2000 and 3000 receivers
Teradek BIT-028

Teradek BIT-028

Antenna Array with protective case for Beam, Bolt 600, 1000, 2000 and 3000 receivers
Teradek Bolt 1000 3G-SDI | HDMI Receiver

Teradek Bolt 1000 3G-SDI | HDMI Receiver

SDI | HDMI Wireless Video Receiver - 1000ft
Teradek Bolt 1000 3G-SDI Receiver

Teradek Bolt 1000 3G-SDI Receiver

SDI Wireless Video Receiver - 1000ft
  • SDI | HDMI Wireless Video Receiver - 3000ft
  • Longer Range
    Transmit visually lossless video up to 3000ft with no delay
  • 20mhz Channels
    Use more than twice as many Bolts in one location or avoid interference like never before
  • 2 New DFS Channels
    Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range
  • Built-in HDMI To SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
  • Individual Identity
    Easily identify which Bolt TX and RX work together with removable colored top plates
  • Support for Spectrum Analyzer
    You can now view which channels are not ideal for Bolt whenever you arrive on set. No more guessing, no more mystery interference.
  • Added Broadcast mode
    allows for longer range when used with directional antennas
  • Added three 'Quality' options to balance operation between maximum range and maximum overall quality
  • Supports Wired Pairing
  • Metadata and timecode support
  • 3D LUTs
  • Dual inputs/outputs
  • Multicast capable
  • Manual frequency selection
  • USB 3.0 GRAB Engine included

Technology Guides

Teradek Bolt Firmware v2.1.0

New Features

Bolt 500/1000/3000

  • Added support for Spectrum Analyzer
  • Added support for wired pairing
  • Added support for China region

Bolt 3000 Only

  • Added Broadcast mode, allows for longer range when used with directional antennas
  • Added three 'Quality' options to balance operation between maximum range and maximum overall quality

Changes and Improvements

  • Improve SDI audio compatibility

Bug Fixes

  • 2nd generation Bolt receivers would enter 'Wireless Off' state after some time without an active link

Teradek Bolt Firmware v2.0.5

New Features

  • None

Changes and Improvements

  • Update to support minor hardware change, does not affect existing devices

Bug Fixes

  • None

Bolt Firmware v2.0.6

New Features

  • Added 3G-SDI Level B DL (1080p50/59/60 over 3G-SDI) support for 3rd Generation Bolt line. 3G-SDI Level A will be present on the loop out.
  • Added support for Canon HDMI record flag and time code output over HDMI and SDI.

Changes and Improvements

  • Improved SDI audio support with Black Magic ATEM products for 3rd generation Bolt products.
  • Support for minor hardware change on 3rd generation Bolt. Does not affect existing devices. To update 500/1000/3000, click Advanced, then check the box in the Upgrade column for the Controller

Bug Fixes

  • Status LED did not work correctly for Bolt 1000/3000

Download the latest Firmware and Software

  • Bolt Pro 3000 3G-SDI | HDMI Receiver
  • 5x Wireless Antennas
  • 1/4 20" Thumb Screw
  • 1/2 20" Lightstand Adapter
  • SDI Cable
  • PSU 2-Pin Lemo 18W
  • 1-Year Warranty

Bolt hits the 1km mark!

Teradek is proud to announce the Bolt 1000 and Bolt 3000, two new zero delay wireless video systems that can transmit up to 1000ft and 3000ft respectively. Both models offer greatly improved wireless performance at more affordable prices, while maintaining visually lossless image quality.