Wireless Video Senders

Bolt 1000 Deluxe Kit SDI | HDMI Gold Mount Wireless Video Transceiver Set

Teradek

Bolt 1000 Deluxe Kit SDI | HDMI Gold Mount Wireless Video Transceiver Set

Deluxe SDI | HDMI Wireless Video Tranceiver Set - Gold Mount 1000ft

Product Code: TER-BOLT-965-1G

Suggested Retail Price £5,695+VAT

Where to buy

Kit List

View your Kit List
  • Deluxe SDI | HDMI Wireless Video Tranceiver Set - Gold Mount 1000ft
  • Longer Range
    Transmit visually lossless video up to 1000ft with no delay
  • 2 New DFS Channels
    Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range
  • Built-in HDMI To SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
  • Individual Identity
    Easily identify which Bolt TX and RX work together with removable colored top plates
  • Support for Spectrum Analyzer
    You can now view which channels are not ideal for Bolt whenever you arrive on set. No more guessing, no more mystery interference.
  • Supports Wired Pairing
  • Metadata and timecode support
  • 3D LUTs
  • Dual inputs/outputs
  • Multicast capable
  • Manual frequency selection
  • USB 3.0 GRAB Engine included
Teradek Sidekick II
Sidekick II

Lightweight HD-SDI Receiver

Teradek BIT-780-1
BIT-780-1

Yellow Identification Plate for Bolt 1000/3000 Receiver

Teradek BIT-781-1
BIT-781-1

Red Identification Plate for Bolt 1000/3000 Receiver

Teradek BIT-782-1
BIT-782-1

Green Identification Plate for Bolt 1000/3000 Receiver

Teradek BIT-783-1
BIT-783-1

Blue Identification Plate for Bolt 1000/3000 Receiver

Teradek BIT-780
BIT-780

Yellow Identification Plate for Bolt 1000/3000 Transmitter

Teradek BIT-781
BIT-781

Red Identification Plate for Bolt 1000/3000 Transmitter

Teradek BIT-782
BIT-782

Green Identification Plate for Bolt 1000/3000 Transmitter

Teradek BIT-783
BIT-783

Blue Identification Plate for Bolt 1000/3000 Transmitter

Frequency Violations!

Anyone with a wireless mic knows about frequencies... But what's the score with sending video over the 5.8Ghz band?

Teradek Bolt Firmware v3.0.0

New Features

  • Added support for Bolt LT, XT models
  • Bolt XT models now transmit most Arri SDI metadata

Changes and Improvements

  • Sidekick II maximum range is now 500ft

Bug Fixes

  • Improved HDMI EDID compatibility

BOLT MANAGER 3.3.2

NEW FEATURES

  • Added support for Bolt LT, XT models

CHANGES

  • None

BUG FIXES

  • None

Teradek Bolt Firmware v2.2.0

New Features

  • None

Changes and Improvements

  • Improve SDI audio compatibility

Bug Fixes

  • SDI input signal was not stable on some devices
  • Fixed issues where 2nd gen receivers would enter 'Wireless Off' state after being idle for a few minutes
  • Some monitors did not recognize SDI video signal when the on screen display was active

Teradek Bolt Firmware v2.1.0

New Features

Bolt 500/1000/3000

  • Added support for Spectrum Analyzer
  • Added support for wired pairing
  • Added support for China region

Bolt 3000 Only

  • Added Broadcast mode, allows for longer range when used with directional antennas
  • Added three 'Quality' options to balance operation between maximum range and maximum overall quality

Changes and Improvements

  • Improve SDI audio compatibility

Bug Fixes

  • 2nd generation Bolt receivers would enter 'Wireless Off' state after some time without an active link

Download the latest Firmware and Software

  • 1 x Bolt Pro 1000 TX SDI/HDMI
  • 1 x Bolt Pro 1000 RX SDI/HDMI
  • 1 x Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
  • 1 x Bolt RX Single AB Mount Battery Plate 14.4V
  • 1 x SKB Waterproof Utility Case (22 x 17 x 8 inches)
  • 5 x N-Male to RP-SMA 12 inch cables (for use with Bolt Rx Only)
  • 1 x 1/4 20" Thumb Screw (1.25 inch)
  • 1 x 1/4 20" Thumb Screw Plastic Head 2 inch length
  • 1 x 1/4 20 Thumb Screw Plastic Head 3/8 inch length
  • 1 x 1/4-20 Screw Phil Pan Mach Black 3/8 inch
  • 1 x 1/2 20" Lightstand Adapter
  • 1 x 3/8" Lightstand Adapter
  • 1 x 2pin Lemo to PowerTap - 18 inch Cable
  • 1 x 2pin Lemo to PowerTap - 11 inch Cable
  • 1 x PSU 2-Pin Lemo 18W
  • 1 x USB 3.0 SuperSpeed Cable (A to Micro, 3ft)
  • 1 x Hot Shoe Adapter
  • 2-3 x (2 for 1 Rx, 3 for 2 Rx) SDI Cables (BNC to BNC)
  • 2-3 x (2 for 1 Rx, 3 for 2 Rx) HDMI Cables (Type A to Type A)
  • 5 x Antenna 2dBi WiFi 5.8GHz
  • 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
  • 1-Year Warranty on Bolt Pro 2000 Units

Also Consider

SmallHD 702 Bright
SmallHD 702 Bright

7-inch Daylight Viewable 1080P Field Monitor

Panasonic VariCam LT
Panasonic VariCam LT

Varicam LT 4K camera head

Blackmagic Design URSA Mini 4.6K EF
Blackmagic Design URSA Mini 4.6K EF

Compact and lightweight digital film camera with high performance 4.6K Super 35 sensor with up to 15 stops of dynamic range - EF lens mount

Cookies

We use cookies to help us offer you the best online experience. By continuing to use our website/or clicking Accept, you consent to the use of cookies in accordance with our privacy policy.