Teradek Bolt 1000 Deluxe Kit SDI | HDMI 2 x RX Gold Mount Wireless Video Transceiver Set

Deluxe SDI | HDMI Wireless Video Tranceiver Set - 2 x RX Gold Mount 1000ft

Suggested List Price: £8,150+VAT

Product Code: TER-BOLT-965-2G

Where to buy

Stock status: In Stock; available from resellers

Qty:

Also consider

Panasonic VariCam LT

Panasonic VariCam LT

Varicam LT 4K camera head
Blackmagic Design URSA Mini 4.6K EF

Blackmagic Design URSA Mini 4.6K EF

Compact and lightweight digital film camera with high performance 4.6K Super 35 sensor with up to 15 stops of dynamic range - EF lens mount
SmallHD 1703 HDR

SmallHD 1703 HDR

17" HDR Ready 1000NIT 1080p Ultra Durable Monitor
Anton Bauer G150

Anton Bauer G150

Digital 150 Gold Mount Battery
Teradek Sidekick II

Teradek Sidekick II

Lightweight HD-SDI Receiver
Teradek Sidekick II

Teradek Sidekick II

Lightweight HD-SDI Receiver

Optional Extras

Teradek Sidekick II

Lightweight HD-SDI Receiver

Product Code: TER-BOLT-954

Suggested List Price: £1,920+VAT

Teradek BIT-780-1

Yellow Identification Plate for Bolt 1000/3000 Receiver

Product Code: TER-BIT780-1

Suggested List Price: £9+VAT

Teradek BIT-781-1

Red Identification Plate for Bolt 1000/3000 Receiver

Product Code: TER-BIT781-1

Suggested List Price: £9+VAT

Teradek BIT-782-1

Green Identification Plate for Bolt 1000/3000 Receiver

Product Code: TER-BIT782-1

Suggested List Price: £9+VAT

Teradek BIT-783-1

Blue Identification Plate for Bolt 1000/3000 Receiver

Product Code: TER-BIT783-1

Suggested List Price: £9+VAT

Teradek BIT-780

Yellow Identification Plate for Bolt 1000/3000 Transmitter

Product Code: TER-BIT780

Suggested List Price: £9+VAT

Teradek BIT-781

Red Identification Plate for Bolt 1000/3000 Transmitter

Product Code: TER-BIT781

Suggested List Price: £9+VAT

Teradek BIT-782

Green Identification Plate for Bolt 1000/3000 Transmitter

Product Code: TER-BIT782

Suggested List Price: £9+VAT

Teradek BIT-783

Blue Identification Plate for Bolt 1000/3000 Transmitter

Product Code: TER-BIT783

Suggested List Price: £9+VAT

  • Deluxe SDI | HDMI Wireless Video Tranceiver Set - 2 x RX Gold Mount 1000ft
  • Longer Range
    Transmit visually lossless video up to 1000ft with no delay
  • 2 New DFS Channels
    Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
  • 20% Smaller Chassis
    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed
  • More Robust Than Ever Before
    Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
  • Rapid Reconnection
    Reconnect times during a dropped link are now instantaneous once you move back into range
  • Built-in HDMI To SDI Converter
    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device
  • Individual Identity
    Easily identify which Bolt TX and RX work together with removable colored top plates
  • Metadata and timecode support
  • 3D LUTs
  • Dual inputs/outputs
  • Multicast capable
  • Manual frequency selection
  • USB 3.0 GRAB Engine included

Technology Guides

Teradek Bolt Firmware v2.0.5

New Features

  • None

Changes and Improvements

  • Update to support minor hardware change, does not affect existing devices

Bug Fixes

  • None

Bolt Firmware v2.0.4

Bolt Firmware v2.0.6

New Features

  • Added 3G-SDI Level B DL (1080p50/59/60 over 3G-SDI) support for 3rd Generation Bolt line. 3G-SDI Level A will be present on the loop out.
  • Added support for Canon HDMI record flag and time code output over HDMI and SDI.

Changes and Improvements

  • Improved SDI audio support with Black Magic ATEM products for 3rd generation Bolt products.
  • Support for minor hardware change on 3rd generation Bolt. Does not affect existing devices. To update 500/1000/3000, click Advanced, then check the box in the Upgrade column for the Controller

Bug Fixes

  • Status LED did not work correctly for Bolt 1000/3000

New Features

  • Add support for Canon HDMI timecode input, SDI timecode output (time code is not re-embedded into HDMI signal).

Changes and Improvements

  • Improved Bolt 500 status LED operation

Bug Fixes

  • Sony/ARRI/Canon SDI Record start/stop flags were not output correctly on 3rd generation Bolts

Bolt Firmware v2.0.3

You must re-pair Bolts after upgrading from 1.2.x firmware packages.

New Features

  • Bolt 300, 600, and 2000 now transmit metadata to all (up to 4) receivers

Changes and Improvements

  • Improved HDMI input stability for 3rd generation Bolt models

Bug Fixes

  • Time code and record flags were not recognized by some monitors/recorders

Download the latest Firmware and Software

  • 1 x Bolt Pro 1000 TX SDI/HDMI
  • 2 x Bolt Pro 1000 RX SDI/HDMI
  • 1 x Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
  • 1 x Bolt RX Single AB Mount Battery Plate 14.4V
  • 1 x SKB Waterproof Utility Case (22 x 17 x 8 inches)
  • 5 x N-Male to RP-SMA 12 inch cables (for use with Bolt Rx Only)
  • 1 x 1/4 20" Thumb Screw (1.25 inch)
  • 1 x 1/4 20" Thumb Screw Plastic Head 2 inch length
  • 1 x 1/4 20 Thumb Screw Plastic Head 3/8 inch length
  • 1 x 1/4-20 Screw Phil Pan Mach Black 3/8 inch
  • 1 x 1/2 20" Lightstand Adapter
  • 1 x 3/8" Lightstand Adapter
  • 1 x 2pin Lemo to PowerTap - 18 inch Cable
  • 1 x 2pin Lemo to PowerTap - 11 inch Cable
  • 1 x PSU 2-Pin Lemo 18W
  • 1 x USB 3.0 SuperSpeed Cable (A to Micro, 3ft)
  • 1 x Hot Shoe Adapter
  • 2-3 x (2 for 1 Rx, 3 for 2 Rx) SDI Cables (BNC to BNC)
  • 2-3 x (2 for 1 Rx, 3 for 2 Rx) HDMI Cables (Type A to Type A)
  • 5 x Antenna 2dBi WiFi 5.8GHz
  • 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
  • 1-Year Warranty on Bolt Pro 2000 Units