Equipment Carts

INOVATIV Deploy Gen IV with Two-Stage Risers | Vertical workstation with Two-Stage Risers

INOVATIV

Deploy Gen IV with Two-Stage Risers

Vertical workstation with Two-Stage Risers

Product Code:

Product Discontinued

  • Vertical workstation with Two-Stage Risers
  • Split design configuration
  • Lightweight, easy to move around
  • Easy access to rack mounted components
  • Collapsible side wings

Deploy Gen IV is the ultimate rack-mountable vertical workstations. With its split design configuration the two equal halves allow you to separate for transport. There are 8U’s on top and 8U’s on the bottom, with a total of 16U’s of usable rack-mountable space.

This kit includes dual Two-Stage Risers and dual Pro Monitor Mounts. The Two-Stage Risers seamlessly integrate into the receiver tubes located on the back side of the cart and the Pro Monitor Mounts are equipped with a standard 100×100 VESA Plate which fits on most monitors and gives the ability to freely rotate the monitor or easily lock it in a vertical or horizontal position providing you with an amazing vertical workstation.

Deploy was created by Matt Conrad, a Los Angeles based Digital Imaging Technician, who recognized the need for a vertical workstation with a smaller footprint. The Gen IV is Deploy’s newest line of vertical carts that have been redesigned by INOVATIV from the ground up to be lighter in weight, easier to move around, and include all of the benefits and features of using INOVATIV’s long line of integrated accessories. The Gen IV uses premium materials, has impeccable build quality, and is accompanied with INOVATIV’s 5 year limited manufacturers warranty and customer service and support that extends through your products lifetime.

The Gen IV has four removable aluminum side panels that reduce dust penetration to the inside of the workstation and provide easy access to rack mounted components in case any necessary adjustments need to be made.

The top surface of the Gen IV is aluminum, is equipped with a 2.5″ cable pass through hole for improved cable management, and is finished INOVATIV’s signature black outdoor marine carpet.

The Gen IV was designed with INOVATIV’s reliable and lightweight 8” EVO Dovetail Wheel System in the front and standard 20” Skyway wheels in the back to improve its capability for easy curb assistance and accessing stairs.

Another key feature is the two aluminum handles it comes with for easier mobility. One handle is located in the front, at the top of the workstation, and the second handle is located at the back of the workstation on the bottom, to be used as a stepping plate to easily pull the workstation over cables, curbs, and uneven surfaces.

For easier access through narrow halls and entryways, the Gen IV has collapsible side wings. When fully extended, the side wings provide an additional 24″ of workspace.

Gen IV also includes an accessory mount on the back side of the workstation to allow for use of monitor mounting and accessories that won’t take up or limit your workstation space.

In addition to all of the updated features, the aluminum frame design includes several new threaded mounting points to support a variety of tools and accessories. These include receiver tubes that accept INOVATIV’s fixed Insight Monitor Mount System, INOVATIV Corner Baby Pin Plug, and Two-Stage Corner Risers that are most commonly used on the Apollo workstations.

Additionally you’ll find the Center Mast Bracket mounted in the rear of the cart on the top frame, dead center, that is used as an additional mounting point for accessories. Think of the Center Mast Bracket as a hub for mounting transceivers, receivers, boom polls and more.

  • Deploy Gen IV
  • Center Mast Bracket
  • Crossbar
  • Premium Wheels and Brakes
  • Two Two-Stage Risers
  • Two Pro Monitor Mounts
Back to Top

Cookies

We use cookies to help us offer you the best online experience. By continuing to use our website/or clicking Accept, you consent to the use of cookies in accordance with our privacy policy.